Dream Vision Yunzi+ Family User Manual

2.0  INSTALLATION GUIDELINES
R699823 - Yunzi Family User Manual 11 
2.7 Ceiling Mounting the Unit
When mounting of this unit is required, make use of the 4 screw holes (M5x20 screws) at the bottom of this
unit indicated by the letter A. Allow sufficient space around the air inlets to avoid blocking them
.
Precautions for Ceiling-mount
•To ceiling-mount this unit, special expertise and techniques are
necessary. Be sure to ask your dealer or specialist to perform
mounting.
•Do not mount at places that may...

2.0  INSTALLATION GUIDELINES
12 R699823 - Yunzi Family User Manual
2.9 Setting the Lens and using Lens Memories
Adjust the picture position
The optimum image can be obtained when the centre of this projector’s lens and the screen are placed
perpendicular to each other. Take note of the projection angle when placing them. You can also use up to +/- 15° up
and down position and configure trapezoidal correction.
This unit comes with a optical shift that features vertical and horizontal adjustment of the...

3.0  REMOTE CONTROL UNIT (RCU)
R699823 - Yunzi Family User Manual 13 
•Saving current lens setup
Fist step is to set the lens to fill the desired screen. Then go into the Menu ⇒⇒ ⇒ ⇒
 Installation ⇒⇒ ⇒ ⇒
 Lens Control, Select
Lens Memory Save and choose one of the five available. You can call back anytime later this current lens setup
using the direct access button [Lens Mem]ory on the RCU.
•Limitations of use
Each memory can store a different picture size and position, but there are limitations on the...

3.0  REMOTE CONTROL UNIT (RCU)
14 R699823 - Yunzi Family User Manual
3.2 Loading and replacing batteries
•Push the cover tab with the fingernail a little backwards and pull upwards the cover top. Slide the cover forward
to remove.
•Push the battery body towards the spring and lift up to remove. Insert two AAA size batteries, making sure the
polarities match the + and - marks inside the battery compartment.
•Insert the lower tab of the battery cover in the gap at the bottom of the remote control, and press...

4.0  GETTING STARTED
R699823 - Yunzi Family User Manual 15 
4.0 GETTING STARTED
4.1 General View
Front side
•Optical Lens from which the image is projected.
•Operating LEDs: see section 4.3, page 16 for more details.
•Air Outlets: see “Air-Flow and Space Requirements”,  page 10.
Rear side
•Input Panel: connect your video source to the correct input.
•Operating and Navigation buttons described in section 4.4, page 17.
•Main Power: connect the power cord as shown below.
•Lamp trap: see “Procedure for Lamp...

4.0  GETTING STARTED
16 R699823 - Yunzi Family User Manual
4.2 Connecting the Power Cord
•Before plugging in the Power Cord, ensure that all devices have been connected
to their respective inputs to this unit.
•Connect the power cord to the power input terminal of the projector.
4.3 Operating LEDs
CAUTION AGAINST FIRE AND ELECTRIC SHOCK
Since the power consumption of this unit is high, insert the power plug directly into a wall outlet.
Do not use a power voltage different from that which is indicated. Do...

5.0  CONNECTIONS
R699823 - Yunzi Family User Manual 17 
4.4 Operating and Navigation Buttons
5.0 CONNECTIONS
5.1 Caution when connecting a device to HDMI input
ButtonDescription
Power buttonTo turn On or Off the projector.
Input sourceTo switch input source.
OK (Enter)To select or to confirm action.
Up - down - left - rightTo navigate into On Screen Display (OSD) Menu.
MenuTo display On Screen Display (OSD) Menu.
BackTo return to previous menu or cancel action.
Prior to connecting any device to this unit,...

5.0  CONNECTIONS
18 R699823 - Yunzi Family User Manual
5.2 Connecting a Video Source to the Projector
ConnectionDevice
HDMI1, HDMI2
v1.4a with M3 lock holeHDMI or DVI-D sources: Blu-Ray Disc player, DVD-player with HDMI, Game 
Console, Computer with DVI-D output.
3D Synchro output3D synchro emitter to control active shutter glasses. 3-PIN mini-DIN 
interface, 12V.
YPbPr or RGB (3x RCA)DVD-Player, HDTV Receiver, Game Console (SD or HD), DVB-T receiver, 
Multimedia box, Analog Camera.
Make sure to use a...

5.0  CONNECTIONS
R699823 - Yunzi Family User Manual 19 
5.3 Connecting an Automation or Control device
ConnectionDevice
RS-232CAutomation Device, Control Device or Computer with RS-232 capability.
Optional IR-receiverCan be used to connect an external IR receiver when this unit is used in a 
dedicated box or in rear projection setup.
12V TriggerDC power supply output 12V@140-300mA to control either a screen or an 
anamorphic slider.
LANAutomation Device, Control Device or Computer with RJ-45.
(*) USING...

6.0  MENU STRUCTURE
20 R699823 - Yunzi Family User Manual
6.0 MENU STRUCTURE
MAIN MENUSUBMENUAVAILABLE OPTIONS
Picture AdjustPicture Mode
(6 + 5 User)(Movies)  Film
(Digital Cinema)  Cinema
(SF movies or animes)  Animation
(Video programs)  Natural
(Concerts)  Stage
3D
User1
User2
User3
User4
User5
Contrast-50 +50
Brightness-50 +50
Color-50 +50
Tint (reddish to greenish)-50 +50
Color Temp.Preset value:
5500K
6000K
6500K
7000K
7500K
8000K
8500K
9000K
9500K
High brightness
Custom1 Gain, Offset
Custom2...