Digital Projection Titan 1080p 3d, Dual 3d, Titan 1080p 3d, Dual 3d Ultra Contrast, Titan Dual Fastframe User Manual

Rev B September 2010 Page 2.17
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual  2. Installation

Adjusting the rigging frame
Coarse adjustment of projector level should be made by adjusting the length of 
the supporting wires or chains, or by adjusting the position of the truss or rigging. 
Once the initial coarse adjustment has been made, fine adjustment can be made by 
turning the frame adjusters on the rigging frame:
To tilt the projector forwards and backwards (pitch...

Page 2.18  Rev B September 2010
2. Installation  Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual

Notes
 When stacking projectors, 
the stack MUST be vertical, 
to ensure that the stresses 
are distributed to all frame 
couplings.
 Make sure that the surface, 
ceiling or rigging that is 
to support the projector is 
capable of supporting the 
combined weight of all the 
projectors and lenses (see 
specification for weights).
 Do not place heavy objects 
on top of the projector...

Rev B September 2010 Page 2.19
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual  2. Installation

Notes
 For more information on 
selecting an input source, see 
section	4.	Overview,	using	
the control keys, and Using 
the menus.
 For more information about pin 
connections and control codes 
see section 7. Appendix.
 For more information on 
input modes see section 
4. Overview.
 Input 8 and 3D may not be 
present on some models
Connecting the projector
Signal Inputs
The following...

Page 2.20  Rev B September 2010
2. Installation  Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual

Notes
 There is no scaler on input 8.
  Images up to and including the 
native resolution of the display 
will be displayed pixel for pixel 
and centred.
  This enables the projector to 
maximise the image bandwidth 
and greyscale resolution.
Input format, DVI input 3
Single DVI-D
Sources upto 1920x1080 resolution; 24- 60Hz; 8bits per colour.
Input formats, DVI input 8
Single DVI-D...

Rev B September 2010 Page 2.21
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual  2. Installation

DVI Input connection examples
Single DVI video source
Single or Dual DVI video source
Input 3
Input 8 MAIN
Projector
Input 8 MAIN
Input 8 SUB
 Twin DVI video source
Projector
Notes
 Dual DVI:
  high bandwidth/frame rate
 Twin DVI:
  increased bit depth/extended 
greyscale
 For important information about 
how Input 8 is used, see INPUT 
8 in the Notes column, and also 
Section	4,...

Page 2.22  Rev B September 2010
2. Installation  Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual

Projector
3D server
Z screen or  
3D glasses
Inputs 1-7
Sync
Video
Sync 
out
3D connection examples
3D sources up to 60Hz, requiring frame doubling and left/right 
interleaving
Notes
 For important information about 
how Input 8 is used, see INPUT 
8 in the Notes column, and also 
Section	4,	Overview
.
Sync in
Projector
3D server
Z screen or  
3D glasses
Input 8
Sync
Video
Sync 
out...

Rev B September 2010 Page 2.23
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual  2. Installation

Notes
 For more information about pin 
connections and control codes 
see section 7. Appendix.
 For more information about 
using a browser to control the 
projector see section 4. Using 
the menus.
Computer
Null-modem  
cable
Control connection examples
LAN connection
All of the projector’s features can be controlled via a LAN connection, using a 
standard internet browser package...

Page 2.24  Rev B September 2010
2. Installation  Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual
Notes
 Use only the power cable 
provided.
 Ensure that the power 
outlet includes a Ground 
connection, as this 
equipment MUST be earthed.
 Handle the power cable 
carefully and avoid sharp 
bends. Do not use a damaged 
power cable.
Power connection
When mains power is first applied, the projector will perform a self-test, then go into 
Standby mode.
The Power indicator on the...

Rev B September 2010 Page 3.1
3. Getting Started
Contents
Switching the projector on ...............................................................................................................3.2
Selecting an input or test pattern ...................................................................................................3.2
Input ................................................................................................................................................3.2
Test pattern...

Page 3.2  Rev B September 2010
3. Getting Started  Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual

Selecting an input or test pattern
Input
Press  or   to change to the next input up or down the following list:
1. RGB1
2. RGB2
3. DVI (Single)
4. SDI
5. Composite Video
6. S-Video
7. Component
8. DVI (Single/Dual/Twin pixel-mapped)
Or press the numbered keys 1–8 to change directly to the input:
Test pattern
 If you have no video source connected to the projector, then you can...