Digital Projection Titan 1080p 3d, Dual 3d, Titan 1080p 3d, Dual 3d Ultra Contrast, Titan Dual Fastframe User Manual

Rev B September 2010 Page 1.3
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual  1. Introduction

NotesKey features of the projector
Congratulations on your purchase of the Digital Projection Titan 1080p-3D/ 
FastFrame projector.
Digital Projection International, Texas Instruments’ first DLP™ partner and 
the original innovator of the 3-chip DLP™ projector, proudly introduces the 
Titan 1080p 3D. Titan 3D projectors are the perfect imaging solution for vital 
immersive applications,...

Page 1.4  Rev B September 2010
1. Introduction  Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual

Getting to know the projector
Front panel, – lens and power
Notes
 For more detailed information 
about lenses, see 
section 2. Installation
Rear panel
Rear Infra-red window 
(remote control)
Power 
connectionLens
Air inlet - 
around lens
Front Infra-red window
(remote control)
Air inletAir outlet 
duct 

Rev B September 2010 Page 1.5
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual  1. Introduction

Side panel – connection and controlNotes
 For information about how 
to connect the projector, see 
Connecting the projector in 
section 2. Installation, and 
Connections in section 7. 
Appendix.
 For information about how 
to use the control panel, see 
section 4. Controlling the 
projector.
 For information about how to 
mount and stack projectors, see 
section 2. Installation.
Front...

Page 1.6  Rev B September 2010
1. Introduction  Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 

Rev B September 2010 Page 2.1
2. Installation
Contents
Screen requirements .........................................................................................................................2.2
Aspect ratio ......................................................................................................................................2.2
Fitting the image to the DMD .............................................................................................................2.2
Images...

Page 2.2  Rev B September 2010
2. Installation  Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual

Screen requirements
Aspect ratio
Fitting the image to the DMD
If the source image supplied to the projector is smaller than 192 0 x 1080 pixels, 
then the image will not fill the DMD. The following example shows how a number 
of common formats may be displayed.
Images displayed full width
Images displayed full height
Notes
 The images are shown here 
scaled automatically by the...

Rev B September 2010 Page 2.3
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual  2. Installation

Diagonal screen sizes
Screen sizes are sometimes specified by their diagonal size (D) in inches. When 
dealing with large screens and projection distances at different aspect ratios, it is 
more convenient to measure screen width (W) and height (H).
The example calculations below show how to convert diagonal sizes in inches into 
width and height, at various aspect ratios.
2.35:1...

Page 2.4  Rev B September 2010
2. Installation  Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual

Fitting the image to the screen
It is important that your screen is of sufficient height and width to display images at 
all the aspect ratios you are planning to use.
Use the conversion chart, or the sample calculations below to check that you are 
able to display the full image on your screen. If you have insufficient height or width, 
you will have to reduce the overall image size...

Rev B September 2010 Page 2.5
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual  2. Installation

Positioning the screen and projector
For optimum viewing, the screen should be a flat surface perpendicular to the floor . 
The bottom of the screen should be 1.2m (4 feet) above the floor and the front row 
of the audience should not have to look up more than 30° to see the top of the 
screen.
The distance between the front row of the audience and the screen should be at 
least twice...

Page 2.6  Rev B September 2010
2. Installation  Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual

Notes
 The High Brightness lenses are 
recommended for the standard 
models, for maximum light 
output.
  The High Contrast lenses are 
recommended for the Ultra 
Contrast models, for maximum 
contrast.
 Each time a new lens is 
fitted	to	the	projector,	
the calibration procedure 
must be carried out. See 
Setup menu, in Section 4. 
Controlling the projector.
  For more information...