Digital Projection Thunder 9000gv User Manual
Here you can view all the pages of manual Digital Projection Thunder 9000gv User Manual. The Digital Projection manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 1
THUNDER 9000gv Super High Brightness Digital Video Projector User Manual
Page 2
E – ii CAUTION: To turn off main power, be sure to remove the plug from power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible. 3. GSGV Acoustic Noise Information Ordinance: The sound pressure level is less than 70 dB(A) according to ISO 3744 or ISO 7779. WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEP- TACLE OR OTHER...
Page 3
E – iii Fire and Shock Precautions 1. Ensure that there is sufficient ventilation and that vents are unob- structed to prevent potentially dangerous concentrations of ozone and the build-up of heat inside your projector. Allow at least 8 inches (20cm) of space between your projector and a wall. Allow at least 20 inches (50 cm) of space between the ventilation outlet and object. 2. Prevent foreign objects such as paper clips and bits of paper from falling into your projector. Do not attempt to retrieve...
Page 4
E – iv Précautions contre lincendie ou la décharge 1. Sassurer quil y ait une ventilation suffisante et que les ouvertures ne soient pas obstruées afin déviter des concentrations potentiellement dangereuses dozone et laccumulation de chaleur à lintérieur du projecteur. Laisser au moins 20 cm despace entre le projecteur et un mur. Veuillez laisser un espace libre d’au moins 50 cm (20 pouces) entre les orifices de ventilation et l’objet. 2. Empêcher tous objets étrangers tels que des attaches trombones ou...
Page 5
E – v Declaration of Conformity Directives covered by this Declaration 89/336/EEC Electromagnetic Compatibility Directive, amended by 92/31/EEC & 93/68/EEC. 73/23/EEC Low Voltage Equipment Directive, amended by 93/68/EEC. Products covered by this Directive Large Screen Projector type THUNDER 9000gv Chassis EURO THUNDER 9000gv Chassis USA Basis on which Conformity is being declared The products identified above comply with the protection requirements of the above EU directives, and the manufacturer has...
Page 6
E – vi TABLE OF CONTENTS Video Adj........................................................................ E-31 Noise Reduction....................................................... E-31 Color Matrix .............................................................E-32 Y/C Delay.................................................................E-32 Telecine.................................................................... E-32 Motion Select ........................................................... E-32...
Page 7
E – 1 Getting Started The fastest way to get started is to take your time and do everything right the first time. Taking a few minutes now to review the manual may save you hours later on. At the beginning of each section of the manual youll find an overview. If the section doesnt apply, you can skip it. Whats In The Box? Make sure your box contains everything listed. If any pieces are miss- ing, contact your dealer. Please save the original box and packing ma- terials if you ever need to ship the...
Page 8
E – 2 1. Part Names and Functions PC Card Slot *To turn on the main power to the projector, press the switch to the ON position (I) and the POWER indicator on the rear panel will turn or- ange in color. Press to the OFF position (0) to turn the main power off. NOTE: When turning off the main power, first return the projector to the standby condition by pressing the POWER OFF button on the remote control or the POWER button on the rear panel and then turn off the main POWER switch. These pro- cedures are...
Page 9
E – 3 LENS SHIFT ZOOM MENU SELECT -+ ENTER ONINDICATOR POWER STATUS ON/OFF OFF CANCEL FOCUS 11 10 9 8 7 5 4 2 1 3 6 1. Power Button Press to turn the projector on when the projector is in the standby con- dition (Main Power switch must be on and the POWER indicator lit or- ange). Press and hold for 2 seconds to turn off the projector. 2. Power Indicator When this indicator is green, the projector is on; when the indicator is orange, it is in standby mode. NOTE: After the projector is turned off, the...
Page 10
E – 4 OUTPUT INPUT3 OPTION REMOTE1RGB OUTIN REMOTE2 REMOTE3INPUT7 INPUT8 INPUT5 INPUT6 OUT LED ON OFF IN INY C S-VIDEO1 S-VIDEO2 VIDEO1 VIDEO2 R/Cr B/CbCb H/HV V VH/HV B/CbG/Y G/YR/CrCr SDI Y INPUT2 INPUT1 INPUT4 OUTPUT INPUT0 RGB DIGITALINPUT9 OUT 5 1 2 3 4 1312 11 10 9 8 7 6 Terminal Panel ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ For the optional SD-SDI board.