Digital Projection Showlite 3000sx, 4000gv User Manual

When Manual Play is selected, the Play and Stop icons on the toolbar are used to
control slide playback when PC Card Viewer is selected.
Capture Options- These options are used for the Capture function and can be
selected from Tools menu. You have three options for JPEG compression: High
Quality, Normal, and High Compression.
SETUP PAGE 2
Signal Select - Allows you to define the type of RGB and VIDEO input signals.
RGB1 and RGB2 allow you to define the RGB input as either RGB, Component or
Auto. RGB...

SETUP PAGE 3
Signal Select - Allows you to choose VIDEO or S-VIDEO for the RGB1 and
RGB2 connectors. By default Auto would be defined.
SETUP PAGE 4
Auto Adjust (RGB Only)- When checked, the projector automatically determines
the best resolution for the current RGB input signal. The projector can automatically
adjust the Horizontal and Vertical Position along with Clock, Phase and Resolution.
CÑ70
System Operation
OPERATION
LBV00073; Revision A - 11/01/2002 

The projector has a feature that enters a signal automatically in the Entry List
once you have made adjustments. However, this feature is not available if you
adjust a signal using the Auto Adjust feature. To register the signal after you use
the Auto Adjust feature, first you need to make any one adjustment manually.
Auto Start- Defines whether the projector starts up as soon as the mains power is
applied or whether standby mode is selected.
Power Management- When this option is checked, the projector...

SETUP PAGE 5
Remote Sensor- Determines which infra red sensors are enabled for remote control
operation.
S-Video Mode Select- This option selects the S-Video detection mode. The
options are OFF or S2. When set to S2, the projector will identify zoom (16:9) and
wide zoom (4:3) signals.
CÑ72
System Operation
OPERATION
LBV00073; Revision A - 11/01/2002 

SETUP PAGE 6
Communication Speed- Defines the baud rate of the PC CONTROL connector.
Projector ID- Each projector needs its own unique address when used in serial 
communication mode (multiple projector use). To set the projector ID, select Enable
then select the ID number from the spin box. To activate the setting, select OK.
Default Source Select- You can set the projector to default to last input used, a
pre-defined input or to automatically detect an active source on any input connector. 
When set to...

Link Mode 
This feature is used for multiple projector connection using RGB Digital
Input/Output connectors. When using Link Mode, the master projector should be set
to Master and all other projectors set to Slave. For single projector operation,
Standalone should be selected.
Link Mode is not available for DVI Digital.
CÑ74
System Operation
OPERATION
LBV00073; Revision A - 11/01/2002
- 

The Tools Menu provides tools for capturing images and displaying files in a PC
Card.
The ÔCaptureÕ and ÔPC Card FilesÕ features are required for the PC Card
Capture
This feature allows you to capture an image from the source being displayed and
save it as a JPEG to the PC Card. When you select Capture from the menu you are
provided with a tool bar with the following functions Capture, Freeze and Exit. This
toolbar can be used to capture images when the menu is not being displayed.
Capture - Captures an...

PC Card Files
The PC Card Files window displays a list of all the files stored in the PC Card and
allows you to select a file to display or sort the files by name or date. The projector
can only display files in idx, text, HTML, JPEG and BMP format. Selecting BMP
and JPEG files automatically switches to the PC Card Viewer source.
After highlighting the file you want to display using the cursor buttons, select
ÔExecuteÕ to view the file. When you select a JPEG or BMP file and press the Enter
button on the...

To select a new logo, highlight the desired file in the PC Card Files window using
the up and down cursors. Next, press the right cursor followed by the down cursor
to select ÔLogoÕ. Pressing Enter on the remote control will bring up the confirmation
window where you can select either OK or Cancel. To implement the new logo,
select OK then press Enter.
The Help menu provides two options - Contents and information.
Contents
The Contents option provides a list of functions for which online help is...

Page 5 Version (BIOS/Firmware/Data/SUB-CPU)
Page 6 Link Mode
PAGE 6
When you select the Tab for Page 6 in the Information menu the current status of
Link Mode will be displayed.
Master ID- Displays the ID number of the master projector.
Status- Displays the status of the master projector.
Connected PJ- Shows the number of slave projectors connected.
Slave No.- Displays the serial numbers of the slave projectors.
Slave ID- Displays the ID numbers of the slave projectors.
Slave Status- Displays the status...