Digital Projection Projector M-Vision Cine LED User Manual

Rev E October 2014 Page 6.3
Digital Projection M-Vision Cine LED User  Manual 6. Appendix
ProblemPossible solutions
Image is split or otherwise scrambled.Check that the image source is not set to progressive scan.
Image is blurred.Check that the lens is focussed correctly.
Image is too bright, and lacks 
definition in the bright areas.
Decrease the contrast setting.
See section 4. Controlling the projector, Using the control keys and Main 
menu
Image appears ‘washed out’ and is too 
bright in the dark...

Page 6.4 Rev E October 2014
6. Appendix Digital Projection M-Vision Cine LED User Manual
Error codes
If the projector detects an error, the red Issue indicator will flash, as shown in the 
chart below.
For example, if the fan fails, the red indicator will flash twice followed by a pause, 
then the sequence will repeat until the error condition is corrected.
Notes 

Rev E October 2014 Page 6.5
Digital Projection M-Vision Cine LED User  Manual 6. Appendix
Specifications
Part numbers
Projector
0.73:1 fixed lens 110-001
1.56–1.86:1 zoom lens 110-002
1.85–2.40:1 zoom lens 110-003
Power cable 10A, Europe 102-163
Power cable 13A, North America 102-165
Power cable 10A, United Kingdom 102-180
Remote control 109-685
User manual on CD 110-288
Important Information 110-287
Getting Started Guide 111-185
Replacement parts
LED module 109-683
0.8x converter lens 109-727
1.25x...

Page 6.6 Rev E October 2014
6. Appendix Digital Projection M-Vision Cine LED User Manual
Lens aperture
0.73:1 fixed lens F/2.5
1.56–1.86:1 zoom lens F/2.5–2.76
1.85–2.40:1 zoom lens F/2.17–2.46
Lens shift (zoom lenses only)
Vertical ± 0.6 H (120%)
Horizontal ± 0.15 W (30%)
Electrical
Inputs HDMI x 2, RGB, Component x 2, Video, S-Video
Pixel clock (digital) up to 165MHz
Bandwidth (analog) 200MHz
Control inputs  1 x RS232 serial: 38400 baud, 8 bits, 1 stop bit, no parity
  1 x remote control
Mains voltage...

Rev E October 2014 Page 6.7
Digital Projection M-Vision Cine LED User  Manual 6. Appendix
Dimensions
All dimensions in mm 
unless otherwise stated 

Page 6.8 Rev E October 2014
6. Appendix Digital Projection M-Vision Cine LED User Manual
Video formats supported
Signal TypeResolutionFrame 
RateHDMIRGB
Component 1:
RGB
Component 1:Y/Pr/Pb  Y/Cr/CbComponent 2:Y/Pr/Pb  Y/Cr
Video S-Video 
Reference
PC640x480 59.94xxxVESA DMT 
640x480 74.99xxxVESA DMT 
640x480 85xxxVESA DMT 
800x600 60.32xxxVESA DMT 
800x600 75xxxVESA DMT 
800x600 85.06xxxVESA DMT 
848x480 47.95xxxVESA CVT 
848x480 59.94xxxVESA CVT 
1024x768 60xxxVESA DMT 
1024x768 75.03xxxVESA DMT...

Rev E October 2014 Page 6.9
Digital Projection M-Vision Cine LED User  Manual 6. Appendix
Signal TypeResolutionFrame 
RateHDMIRGB
Component 1:
RGB
Component 1:Y/Pr/Pb  Y/Cr/CbComponent 2:Y/Pr/Pb  Y/Cr
Video S-Video 
Reference
NTSC NTSC (M, 4.43) 59.94x x ITU-R BT.1700, SMPTE 170M
PA L PAL (B,G,H,I) 50x x ITU-R BT.1700 
PAL (N) 50x x ITU-R BT.1700 
PAL (M) 59.94x x ITU-R BT.1700 
SECAM SECAM (M) 50x x ITU-R BT.1700 
480i 59.94xxxSMPTE 125M, CEA-861-D 
576i 50xxxITU-R BT.601, CEA-861-D 
EDTV 480p...

Page 6.10 Rev E October 2014
6. Appendix Digital Projection M-Vision Cine LED User Manual
NotesInput connections
HDMI 1 & 2 inputs
19 way type A connector
1 TMDS Data 2+
2 TMDS Data 2 Shield
3 TMDS Data 2-
4 TMDS Data 1+
5 TMDS Data 1 Shield
6 TMDS Data 1-
7 TMDS Data 0+
8 TMDS Data 0 Shield
9 TMDS Data 0-
10 TMDS Clock+
11 TMDS Clock Shield
12 TMDS Clock-
13 CEC
14 not connected
15 SCL (DDC Clock)
16 SCA (DDC Data)
17 DDC/CEC Ground
18 +5 V Power
19 Hot Plug Detect
Composite video input
1 x RCA phono...

Rev E October 2014 Page 6.11
Digital Projection M-Vision Cine LED User  Manual 6. Appendix
pin view of female connector
RGB input
15 way D-type connector
1 R
2 G
3 B
4 unused 
5 Digital Ground (H Sync)
6 R Ground
7 B Ground
8 G Ground
9 +5v
10 Digital Ground (V Sync/DDC)
11 unused
12 SDA
13 H Sync
14 V Sync
15 SCL
Component 1 input
3 x RCA phono connectors
RGsB   YPbPr  YCbCr
Green + Sync     Y    Y
Blue      Pb   Cb
Red      Pr   Cr
RGBS
connect Sync to Video input
Component 2 input
3 x 75 ohm BNC
RGsB...

Page 6.12 Rev E October 2014
6. Appendix Digital Projection M-Vision Cine LED User Manual
Control connections
Wired Remote control connection
3.5mm mini jack
Tip  Signal
Ring Not connected
Sleeve Ground
Trigger 1 & 2 output
3.5mm mini jack
Tip  Signal
Sleeve Ground
Serial control input
1 unused
2 Received Data (RX)
3 Transmitted Data (TX)
4 unused
5 Signal Ground
6 unused
7 unused
8 unused
9 unused
Null-modem cable
(used to connect the projector to a modem)
RX  2 --- 3 TX
TX 3 --- 2 RX
GND 5 --- 5 GND...