Home
>
Digital Projection
>
Projector
>
Digital Projection Projector M-Vision 930 3D Series User Manual
Digital Projection Projector M-Vision 930 3D Series User Manual
Have a look at the manual Digital Projection Projector M-Vision 930 3D Series User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 577 Digital Projection manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 39
page 31
Connection Guide
CONTROL CONNECTIONS
LAN connection examples
The projector’s features can be controlled via a LAN connection, using a terminal-emul\
ation program.
Notes
ComputerProjector
Projector
Un-crossed LAN cables
Hub or LAN
1
1LAN
Projector
Computer
Crossed
LAN cable
Digital Projection M-Vision 930 Series
Rev C Februar y 2015](http://img.usermanuals.tech/thumb/5761/99623/w64_projector_manual_8413_d-38.png "Page 39
page 31
Connection Guide
CONTROL CONNECTIONS
LAN connection examples
The projector’s features can be controlled via a LAN connection, using a terminal-emul\
ation program.
Notes
ComputerProjector
Projector
Un-crossed LAN cables
Hub or LAN
1
1LAN
Projector
Computer
Crossed
LAN cable
Digital Projection M-Vision 930 Series
Rev C Februar y 2015")
![Page 42
Operating Guide
IN THIS GUIDE
IN THIS GUIDE
Using The Menus ........................................................................\
.......................35
Opening the OSD ......................................................................................................35
Opening a menu ........................................................................................................35
Exiting menus and closing the OSD...](http://img.usermanuals.tech/thumb/5761/99623/w64_projector_manual_8413_d-41.png "Page 42
Operating Guide
IN THIS GUIDE
IN THIS GUIDE
Using The Menus ........................................................................\
.......................35
Opening the OSD ......................................................................................................35
Opening a menu ........................................................................................................35
Exiting menus and closing the OSD...")
![Page 43
page 35
Operating Guide
USING THE MENUS
Using The Menus
Opening the OSD
Access the various menus using either the projector control panel or the\
remote
control. On either device,
• press the MENU button.
The on-screen display (OSD) opens showing the list of available menus.\
Opening a menu
Move up and down the list using the UP and DOWN arrow buttons. To open a menu,
• press ENTER (on the remote control) or SELECT (on the control panel).
This guide refers to the above two buttons as ENTER/SELECT....](http://img.usermanuals.tech/thumb/5761/99623/w64_projector_manual_8413_d-42.png "Page 43
page 35
Operating Guide
USING THE MENUS
Using The Menus
Opening the OSD
Access the various menus using either the projector control panel or the\
remote
control. On either device,
• press the MENU button.
The on-screen display (OSD) opens showing the list of available menus.\
Opening a menu
Move up and down the list using the UP and DOWN arrow buttons. To open a menu,
• press ENTER (on the remote control) or SELECT (on the control panel).
This guide refers to the above two buttons as ENTER/SELECT....")
OPERATING GUIDE4 Rev C Februar y 2015 M-Vision 930 Series High Brightness Digital Video Projector
Operating Guide IN THIS GUIDE IN THIS GUIDE Using The Menus ........................................................................\ .......................35 Opening the OSD ......................................................................................................35 Opening a menu ........................................................................................................35 Exiting menus and closing the OSD .......................................................................35 Inside a menu ............................................................................................................36 Accessing sub-menus .....................................................................................................\ 36 Executing commands .....................................................................................................\ .36 Editing projector settings .........................................................................................37 Choosing a value from a list ............................................................................................37 Changing the value without viewing the list ....................................................................37 Using a slider to set a value ............................................................................................37 Using The Projector ........................................................................\ .................38 Main menu .................................................................................................................38 Lens menu .................................................................................................................39 Lens Control .....................................................................................................\ ...............39 Lens Center ....................................................................................................\ ................39 Image menu ...............................................................................................................40 Picture Mode .....................................................................................................\ ..............40 Brightness and Contrast .................................................................................................40 Gamma .....................................................................................................\ ......................41 Dynamic Black .....................................................................................................\ ...........41 Adaptive Contrast ....................................................................................................\ .......41 Saturation, Hue, Sharpness and Noise Reduction .........................................................41 Position and Phase .....................................................................................................\ ....42 Resync .....................................................................................................\ .......................42 Color menu ................................................................................................................43 Color Space .....................................................................................................\ ...............43 Color Temperature .....................................................................................................\ .....44 Gamut .....................................................................................................\ ........................45 RGB Lift and Gain .....................................................................................................\ ......45 Geometry menu .........................................................................................................46 Aspect Ratio .....................................................................................................\ ...............46 Overscan .....................................................................................................\ ....................47 Keystone .....................................................................................................\ ....................48 Rotation .....................................................................................................\ ......................50 Pincushion / Barrel .....................................................................................................\ .....51 Corners .....................................................................................................\ ......................52 Reset .....................................................................................................\ ..........................53 Blanking .....................................................................................................\ .....................54 Edge Blend menu ......................................................................................................55 Blend Width .....................................................................................................\ ................56 Black Level Uplift ....................................................................................................\ ........57 Possible Geometry and Edge Blend combinations ...............................................58 3D menu .....................................................................................................................59 3D types .....................................................................................................\ .....................60 Some 3D settings explained ...........................................................................................61 Frame rate multiplication in 3D images ...........................................................................62 Lamps menu ..............................................................................................................63 Setup menu ................................................................................................................64 Network .....................................................................................................\ ......................65 On Screen Display .....................................................................................................\ .....66 Presets .....................................................................................................\ .......................67 Information menu ......................................................................................................68 Factory Reset .....................................................................................................\ .............68 Digital Projection M-Vision 930 Series Rev C Februar y 2015
page 35 Operating Guide USING THE MENUS Using The Menus Opening the OSD Access the various menus using either the projector control panel or the\ remote control. On either device, • press the MENU button. The on-screen display (OSD) opens showing the list of available menus.\ Opening a menu Move up and down the list using the UP and DOWN arrow buttons. To open a menu, • press ENTER (on the remote control) or SELECT (on the control panel). This guide refers to the above two buttons as ENTER/SELECT. Exiting menus and closing the OSD To go back to the previous page, • press MENU. When you reach the top level, pressing MENU will close the OSD. Notes Projector control panel 2 PIC MUTE4 B SHARP O -SCANNRGAMMA C-TEMPTESTBRI -C 3D SWAP3 D FORMAT2 D /3 D ENTER SOURCE 3 6 1 ASPECT RATIO MENU USER MEMORY CA | ON POWER OFF Remote control On-screen display (OSD): top level (list of available menus) ENTER ON ERRORLEDSTATUSSTANDBY MENU STBY INPUT SelectItem [Enter]Submenu [Menu] Exit TestPattern Lens Image Color Geometry Input OffHDMI1 EdgeBlend 3D Lamps Setup Information Digital Projection M-Vision 930 Series Rev C Februar y 2015
page 36 Operating Guide USING THE MENUS Inside a menu When you open a menu, the page consists of the following elements: • Title bar at the top Shows which menu (and sub-menu) you have accessed. • Highlighted item • Available and unavailable items Unavailable items appear grayed out. Whether an item is available may depend on other settings. • Text next to each item Shows whether the item: • has a value that can be changed (shows the current value) • opens a sub-menu (< Enter >) • executes a command (< Execute >) Accessing sub-menus Use the UP and DOWN arrow buttons to highlight the sub-menu, then press ENTER/SELECT. Executing commands If the item contains a command, press ENTER/SELECT to execute it. You may be asked for confirmation. Use the LEFT and RIGHT arrow buttons to select your answer and then press ENTER/SELECT. Notes The highlighted item has white text on a blue background. Inside a menu Reset Everything YesNo Confirmation dialog MENU>>Sub-menu>> Select Item Adjust[Menu] Return MenuItem Unavailable Item Slider Sub-menu Command Highlighted Item Value Value Numeric value < Enter > < Execute >Value Digital Projection M-Vision 930 Series Rev C Februar y 2015
page 37 Operating Guide USING THE MENUS Editing projector settings If the highlighted menu item is a setting with a list of values to choose from, you can change the value in two different ways. Choosing a value from a list To access the list of values and then make a selection: 1. Highlight the menu item and press ENTER/SELECT. 2. On the new page that opens, use the UP and DOWN arrow buttons to highlight a value, then press ENTER/SELECT again. A green “check” symbol marks the current selection. 3. Press MENU to exit the list. Changing the value without viewing the list Some menu items allow you to switch to the next or previous value withou\ t viewing the list: • Press the LEFT or RIGHT arrow button. Using a slider to set a value Some parameters with a numeric value open a slider. To set such a parameter: 1. Press the LEFT or RIGHT arrow button, or ENTER/SELECT. The arrow buttons will open the slider and adjust the value at the same time. ENTER/SELECT will open the slider without altering the initial value. 2. Use the LEFT and RIGHT arrow buttons to move the slider. 3. When ready, press MENU to exit the slider. Notes Some menu items may be unavailable due to settings in other menus. Unavailable menu items appear gray. List of values Parameter 101 Slider MENU>> SelectItem Adjust[Menu] Return Item Unavailable Item Item Item Item Highlighted Item CurrentValue Value Value Highlighted Value ValueValue Digital Projection M-Vision 930 Series Rev C Februar y 2015
page 38 Operating Guide USING THE PROJECTOR Using The Projector Main menu • Input Press ENTER/SELECT to open the list of available inputs. Use the UP and DOWN arrow buttons to select an input from the list, then press ENTER/SELECT to confirm your choice. Press MENU to return to the main menu. • Test Pattern Choose from: ...Off, White, Black, Red, Green, Blue, CheckerBoard, CrossHatch, V Burst, H Burst, ColorBar... Use the LEFT and RIGHT arrow buttons to switch between values. • Lens, Image, Color, Geometry, Edge Blend, 3D, Lamps, Setup and Information Press ENTER/SELECT to open these sub-menus and access various settings. Notes If no input is connected, the Image and Advanced Image menus will be unavailable. Select Item [Enter]Submenu [Menu] Exit TestPattern Lens Image Color Geometry Input OffHDMI1 EdgeBlend 3D Lamps Setup Information Select Item [Enter]Execute [ Menu] Return Input HDMI2 RGB COMP 1 COMP 2 DVIHDMI 1 HDBaseT TestPattern Lens Image Color Geometry Edge Blend 3D Lamps Setup Information Digital Projection M-Vision 930 Series Rev C Februar y 2015
page 39 Operating Guide USING THE PROJECTOR Lens menu Lens Control Lens Control settings operate in Zoom/Focus Adjustment and Shift Adjustment mode. When in Zoom/Focus Adjustment mode: • Use the UP and DOWN arrow buttons to adjust Zoom. • Use the LEFT and RIGHT arrow buttons to adjust Focus. When in Shift Adjustment mode, use the arrow buttons to adjust Shift. Press ENTER/SELECT to switch between modes as follows: • Zoom/Focus Adjustment mode with the source image • Shift Adjustment mode with the source image • Zoom/Focus Adjustment mode with an alignment grid • Shift Adjustment mode with an alignment grid • Zoom/Focus Adjustment mode with an aspect test • Shift Adjustment mode with an aspect test • Zoom/Focus Adjustment mode with a screen layout pattern1.60:1 (16:10) 1.66:1 1.78:1 (16:9) 1.85:1 1.33:1 (4:3) 2.35:1 • Shift Adjustment mode with a screen layout pattern ... Lens Center Highlight Lens Center and press ENTER/SELECT. NotesLens>> Select Item [Menu]Return LensCenter LensControl [Enter] Execute LensControl [Enter] ShiftAdjustment Zoom Focus Lens Control [Enter] Zoom/Focus Adjustment Shift Digital Projection M-Vision 930 Series Rev C Februar y 2015
page 40 Operating Guide USING THE PROJECTOR Image menu Picture Mode Choose from Bright, Presentation and Video. Press ENTER/SELECT to open the list. Use the UP and DOWN arrow buttons to select a picture mode from the list, then press ENTER/SELECT to confirm your choice. Press MENU to return to the main menu. Brightness and Contrast Highlight the setting you wish to edit, and then press ENTER/SELECT, or the LEFT or RIGHT arrow button to open the slider. Use the LEFT and RIGHT arrow buttons to adjust the slider. Press MENU to close the slider. Image>> Select Item [Menu]Return Contrast Gamma Adaptive Contrast Saturation Hue Brightness 100 Sharpness Noise Reduction Position andPhase Resync 2.2 Off 100 0 0 100 < Execute > Adjust PictureModeBright 100 Dynamic Black Off Notes Digital Projection M-Vision 930 Series Rev C Februar y 2015
page 41 Operating Guide USING THE PROJECTOR Image menu continued from previous page Gamma Choose a de-gamma curve from 1.0, 1.8, 2.0, 2.2, 2.35 and 2.5. Used correctly, the Gamma setting can improve contrast while maintaining good details for blacks and whites. If excess ambient light washes out the image and it is difficult to see details in dark areas, lower the Gamma setting to compensate. This improves contrast while maintaining good details for blacks. Conversely, if the image is washed out and unnatural, with excessive detail in black areas, increase the setting. Dynamic Black Set to On to allow for increased contrast in darker scenes by modulating the ligh\ t source. Adaptive Contrast Set to On to expand the light and dark portions of the contrast curve of the imag\ e, depending on the mean luminance of the image. Saturation, Hue, Sharpness and Noise Reduction Highlight the setting you wish to edit, and then press ENTER/SELECT, or the LEFT or RIGHT arrow button to open the slider. Use the LEFT and RIGHT arrow buttons to adjust the slider. Press MENU to close the slider. Notes SelectItem [Enter]Execute [Menu] Return Brightness 1.8 2.0 2.2 2.35 2.51.0 Contrast Gamma Adaptive Contrast Saturation Hue Sharpness Noise Reduction Position andPhase Resync Image >> Picture Mode Dynamic Black SelectItem [Enter]Execute [Menu] Return Brightness OnOff Contrast Gamma AdaptiveContrast Saturation Hue Sharpness Noise Reduction Position andPhase Resync Image >> Picture Mode Dynamic Black Digital Projection M-Vision 930 Series Rev C Februar y 2015
page 42 Operating Guide USING THE PROJECTOR Image menu continued from previous page Position and Phase Press ENTER/SELECT to open the submenu. • V Position and H Position Set the sliders as required. • Phase Adjusts the phase of the pixel sampling clock relative to the incoming signal. Adjust the phase if noise is visible. • Tracking Adjusts the frequency of the pixel sampling clock. Flicker or vertical banding indicate poor tracking. • Sync Level Adjusts the voltage level of the signal detection circuitry. Adjust if the projector loses sync during scenes where the signal drops below black. Highlight the setting you wish to edit, and then press ENTER/SELECT, or the LEFT or RIGHT arrow button to open the slider. Use the LEFT and RIGHT arrow buttons to adjust the slider. Press MENU to close the slider. Resync Press ENTER/SELECT to force the projector to resynchronize with the current input. NotesImage>>Position andPhase Select Item [Menu]Return HPosition Phase Tracking Sync Level VPosition 100100 – ––– – ––– – ––– Adjust Image >> Select Item [Menu]Return Contrast Gamma Adaptive Contrast Saturation Hue Brightness 100100 Sharpness Noise Reduction Position andPhase Resync 2.2 Off 100 0 0 100 < Execute > Adjust Digital Projection M-Vision 930 Series Rev C Februar y 2015