Digital Projection Projector IVision50-series User Manual
Here you can view all the pages of manual Digital Projection Projector IVision50-series User Manual. The Digital Projection manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 41
41 5.8.2 Settings > Network sub menu change LAN settings: In this sub-menu you can switch the DHCP enabled function on or off. If off you can set a fixed IP-address. LAN DHCP: DHCP is supported and is enabled by default, but can be disabled under change LAN settings LAN IP address: Info field stating the curr ent LAN IP address. LAN subnet mask: Info field stating the current LAN subnet mask. LAN default gateway: Info field stating the current LAN default gateway. LAN MAC address: Info field...
Page 42
42User Manual - Introduction 5.8.3 Settings > Factory Reset sub menu picture: Restores picture settings to factory default. 3D: Restores 3D settings to factory default. communication: Restores communication settings to factory default. ColorMaxTM: Restor es ColorMaxTM settings to factory default. other: Restores other settings of your choice to factory default. 5.8.4 Settings > Service sub menu service: Restricted ar ea with information intended for qualified service personnel only enter code: Enter the...
Page 43
43 5.9 Languages menu Select the desired menu language.• Supported languages: English, Fr ench, German, Spanish, Norwegian, Swedish, Russian, Korean, Japanese,Chinese Traditional, Chinese Simplified, Portuguese, Italian. • Default: English english
Page 44
44User Manual - Introduction 5.10 Status menu source information: Simple and advanced source information. synchronisation information: Gives information on the 3D (off/on) and 2D frame lock (source) part number: Projector part number. serial number: Projector serial number. manufactured (y): Year of manufacturing. manufactured (w): Week of manufacturing. software version: Software version installed in the projector. This is very important for service requests. colorwheel: T ype of colorwheel...
Page 45
45 5.10.1 Status > Source Information sub menu advanced: Access to sub menu for mor e settings depending on source used. See 4.10.2 Status > Source Information > Advanced sub menu source: Info on which source is in use. brightness: Info on brightness settings. contrast: Info on contrast settings. saturation: Info on saturation settings. gamma: Info on gamma-variant used. english
Page 46
46User Manual - Introduction 5.10.2 Status > Source Information > Advanced sub menu sync frequency : Info on current horizontal and vertical sync frequency for the projector. total image size: Info on current horizontal and vertical image size. active image size: Info on current active image size. scan: Pr ojector serial number. pixelclock: Week of manufacturing. mode id: Info on curr ent mode setup (VGA source only). iVision50-series User Manual - Overview english
Page 47
47 5.10.3 Status > Source Synchronisation sub menu 3D: Indicates which 3D mode is used. 2D frame lock: Indicates what the pr ojector locks to in 2D Frequency: Shows the current frequency of the locking signal Status: Indicates the locking status Phase: Indicates phase between the sour ce and the locking signal 3D source sync: Indicates where the source L/R sync is connected Frequency: Shows the current frequency of the signal Duty cycle: Shows the duty cycle of the signal Status: Indicates the sync...
Page 48
48User Manual - IntroductioniVision50-series User Manual - Overview english
Page 49
49 6 Functionality The various functions of the projector are described in detail in the following chapters. 6.1 Powering On and Off 6.1.1 Manual power contr ol Switch the projector between On and Standby using the POWER switch on the keypad or the wireless remote control. The keypad STATUS indicator is blue when the projector is up and running, flashing yellow when cooling down and yellow when in standby. No status light indicates that the power has been switched off completely in the installation....
Page 50
![Page 50
50User Manual - Introduction
6.3 Language
The menu system has a total of 11 user-selectable languages available. The default language
is English.
The available languages are:
•
English
•
Fr
ench
•
German
•
Spanish
•
Russian
•
Norwegian
•
Swedish
•
Kor
ean
•
Japanese
•
Chinese Simplified
•
Chinese T
raditional
•
Portuguese
•
Italian
To change the language of the menu system, just click top menu and select\
your desired
language.
6.4 System...](http://img.usermanuals.tech/thumb/5761/99752/w300_projector_manual_8668_d-49.png "Page 50
50User Manual - Introduction
6.3 Language
The menu system has a total of 11 user-selectable languages available. The default language
is English.
The available languages are:
•
English
•
Fr
ench
•
German
•
Spanish
•
Russian
•
Norwegian
•
Swedish
•
Kor
ean
•
Japanese
•
Chinese Simplified
•
Chinese T
raditional
•
Portuguese
•
Italian
To change the language of the menu system, just click top menu and select\
your desired
language.
6.4 System...")
50User Manual - Introduction 6.3 Language The menu system has a total of 11 user-selectable languages available. The default language is English. The available languages are: • English • Fr ench • German • Spanish • Russian • Norwegian • Swedish • Kor ean • Japanese • Chinese Simplified • Chinese T raditional • Portuguese • Italian To change the language of the menu system, just click top menu and select\ your desired language. 6.4 System...