Digital Projection Projector E-vision Series User Manual

— 22 — 
Adjusting the Zoom, Focus and Keystone 
1.  Use the Image-zoom  
control (on the projector 
only) to resize the 
projected image and 
screen size. 
 
2.  Use the Image-focus  
control (on the projector 
only) to sharpen the 
projected image. 
 
3.  Use the KEYSTONE 
buttons (on the 
projector or the remote 
control) to correct 
image-trapezoid (wider 
top or bottom)  
effect. 
 Remote control and OSD panel 
4.  The keystone control  
appears on the display.  
     

– 23 – 
Adjusting the Volume 
1.  Press the Volume +/-  
buttons on the remote 
control.  
The volume control  
appears on the display. 
 
 
 
2.  Press the Left or Right 
Cursor buttons on the 
keypad to adjust 
Volume +/-. 
3.  Press the MUTE button 
to turn off the volume 
(This feature is 
available only on the 
remote).  
    

— 24 — 
ON-SCREEN DISPLAY (OSD) MENU SETTINGS 
OSD Menu Controls 
The projector has an OSD that lets you make image adjustments and change various settings.  
Navigating the OSD 
You can use the remote control cursor buttons or the buttons on the top of the projector to 
navigate and make changes to the OSD. The following illustration shows the corresponding 
buttons on the projector. 
 
1. To enter the OSD, press the MENU 
button.  
2. There are three menus. Press the cursor 
◄► button to move through...

– 25 – 
Setting the OSD Language 
Set the OSD language to your preference before continuing. 
1. Press the MENU button. Press the cursor ◄► button to navigate to Settings 1. Press 
the cursor ▲▼ button to move to the Advanced 1 menu. 
 
2. Press  (Enter) / ► to enter the Advanced 1 sub menu. Press the cursor ▲▼ button 
until Language is highlighted.  
 
3. Press the cursor button until the language you want is highlighted.  
4. Press the MENU button four times to close the OSD.     

— 26 — 
OSD Menu Overview 
Use the following illustration to quickly find a setting or determine the range for a setting. 
 Image
Settings 1
Off, On
Blank, Red, Green, Blue, White
Off, On
Off, On
3D
3D Sync Invert
3D Format
Hue
Saturation
English, Français, Español, Deutsch, Português, 簡体中文, 繁體中文, Italiano, 
Svenska, Nederlands, Suomi, Ελληνικά, Norsk, Polski, Русский, 한국어, 日本語, 

            , Magyar,    , Türkçe, Čeština, Việt,          ,          
Off, On
Gain
1.8, 2.0, 2.2, 2.4, B&W, Linear
Warm,...

– 27 – 
Image Menu  
Attention !   
All of display mode parameters when changed will be saved to user mode.  
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the 
Image Menu. Press the cursor ▲▼ button to move up and down in the Image menu. Press ◄► 
to enter and change values for settings. 
 
ITEM DESCRIPTION 
Display Mode Press the cursor ◄► button to enter and set the Display Mode.  
Brightness Press the cursor ◄► button to enter and adjust the display brightnessK...

— 28 — 
Computer Menu 
Press the MENU button to open the OSD menu. Press ◄► to move to the Image menu. Press 
▲▼ to move to the Computer menu and then press Enter or ►. Press ▲▼ to move up and 
down in the Computer menu. 
 
ITEM DESCRIPTION 
Horizontal Position Press the cursor ◄► button to enter and adjust the display position to left or right.  
Vertical Position Press the cursor ◄► button to enter and adjust the display position to up or down.  
Frequency Press the cursor ◄► button to enter and adjust...

– 29 – 
Advanced Feature 
Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press 
▼▲ to move to the Advanced menu and then press Enter or ►. Press ▼▲ to move up and 
down in the Advanced menu. 
 
ITEM DESCRIPTION 
Brilliant Color Press the cursor ◄► button to enter and adjust the Brilliant Color valueK 
Sharpness Press the cursor ◄► button to enter and adjust the display sharpnessK 
Gamm~ Press the cursor ◄► button to enter and adjust the gamma correction of the displayK...

— 30 — 
Color Manager 
Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press 
▼▲ to move to the Color Manager menu and then press Enter or ►. Press ▼▲ to move up and 
down in the Color Manager menu.  
 
ITEM DESCRIPTION 
Red Select to enter the Red Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain. 
Green Select to enter the Green Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain. 
Blue Select to enter the Blue Color...

– 31 – 
Settings 1 Menu  
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the 
Settings 1 menu. Press the cursor ▲▼ button to move up and down in the Settings 1 menu. 
Press ◄► to enter and change values for settings. 
 
ITEM DESCRIPTION 
Source Press  (Enter) / ► to enter the Source menuK oeference input Source select 
(Io L Keypad). 
Projection Press the cursor ◄► button to enter and choose from four projection methods: 
Aspect Ratio Press the cursor ◄► button to enter...