Digital Projection Lightning 35hd-T, 40hd-t User Manual
Have a look at the manual Digital Projection Lightning 35hd-T, 40hd-t User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 577 Digital Projection manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
105-453B January 2007 Page 3.5 Digital Projection LIGHTNING 35HD-T, 40HD-T User Manual 3. Getting Started Notes For more detailed information about all the touch screen menus, see the next section: Using the menus. Press the IMAGE button on the Main menu. Press the CONTRAST, BRIGHTNESS or GAMMA buttons. Touch and drag the red sliders up and down, or for fi ne adjustment, press the arrow heads. • • •
Page 3.6 105-453B January 2007 3. Getting Started Digital Projection LIGHTNING 35HD-T, 40HD-T User Manual Switching the power off Press the LAMP button on the Main menu. Press LAMP OFF. Hold the button pressed until the button turns to yellow, then release. The lamp power will ramp down to minimum then go off after a further 3 seconds. Allow the lamp to cool for 5 minutes. Push the main power switch downwards to switch off the power. When the power is switched off, all current settings are retained, and will be restored next time the power is switched back on again. • • • • • Notes Always allow the lamp to cool for 5 minutes before: Switching off the power Moving the projector
105-453B January 2007 Page 4.1 4. Using the Menus Contents Introduction .......................................................................................................................................... 4.3 Menu structure ................................................................................................................................. 4.4 Show mode .......................................................................................................................................... 4.5 Lamp status ..................................................................................................................................... 4.5 Input source ..................................................................................................................................... 4.5 Warnings .......................................................................................................................................... 4.6 LCD screen blank ............................................................................................................................. 4.6 IP addresses .................................................................................................................................... 4.6 Lamp menu .......................................................................................................................................... 4.7 Lamp power ..................................................................................................................................... 4.7 Lamp on........................................................................................................................................... 4.7 Lamp off ........................................................................................................................................... 4.7 Shutter open/closed .......................................................................................................................... 4.7 Lamp/Lens memories ........................................................................................................................ 4.8 Store ............................................................................................................................................ 4.8 Recall .......................................................................................................................................... 4.8 Lens menu ............................................................................................................................................ 4.9 Move, zoom and focus ...................................................................................................................... 4.9 Shutter open/closed .......................................................................................................................... 4.9 Centre ............................................................................................................................................. 4.9 Calibration ........................................................................................................................................ 4.9 Stop all movement ............................................................................................................................ 4.9 Image menu ........................................................................................................................................ 4.10 Test Patterns .................................................................................................................................. 4.10 Shutter open/closed ......................................................................................................................... 4.11 Contrast ......................................................................................................................................... 4.12 Brightness ...................................................................................................................................... 4.13 Gamma .......................................................................................................................................... 4.14 Advanced image setup .................................................................................................................... 4.15 Input preset ................................................................................................................................. 4.15 Input window ............................................................................................................................... 4.16 Input pan .................................................................................................................................... 4.17 Image position ............................................................................................................................. 4.18 Image orientation .......................................................................................................................... 4.19 continued
Page 4.2 105-453B January 2007 4. Using the Menus Digital Projection LIGHTNING 35HD-T, 40HD-T User Manual Confi guration menu ......................................................................................................................... 4.20 Networking confi guration ................................................................................................................. 4.20 Ethernet confi guration choices ......................................................................................................... 4.20 Making the IP address and Netmask settings ...................................................................................... 4.21 Example ..................................................................................................................................... 4.21 Wireless LAN ............................................................................................................................... 4.22 Detailed status ................................................................................................................................ 4.24 Touchscreen calibration ................................................................................................................... 4.24 Reset IP addresses ......................................................................................................................... 4.24 Engineering & Maintenance menu ............................................................................................... 4.25 Log fi les ......................................................................................................................................... 4.25 Software update ............................................................................................................................. 4.25
105-453B January 2007 Page 4.3 Digital Projection LIGHTNING 35HD-T, 40HD-T User Manual 4. Using the Menus Introduction All of the projector’s features can be controlled using: the menus on the touch screen or the same menus on a remote computer using a web browser (with the IP address of the projector typed into the browser address fi eld) None of the menus are ever displayed on the projection screen. In these instructions, it is assumed that the touch screen is being used, so the expressions ‘press the button’, or ‘touch and drag the slider control’ will be used, rather than the familiar ‘click’ or ‘click and drag’ used on a web browser. The buttons and controls react in the following way when operated: A button or control will be coloured white if its function is available. It will be coloured grey if not (some functions are not yet available). Buttons and single-headed arrow controls will change to yellow when pressed. Slider controls can be adjusted by touching and dragging the slider, or for fi ne adjustment, by pressing either arrow head. The numerical value will change to grey until the projector hardware has responded, when the value will change to white. Some sliders and arrow controls can be centred, or reset to default values, by pressing on the number next to the slider or in the middle of the arrows. These operations are described in more detail later in this section. Some functions require the button to be pressed and held for a short period, to avoid accidental operation. In these cases, the button will turn grey when pressed, turning yellow only when the function has been activated. When the projector is fi rst switched on, the control panel will be in Show mode, as described on the page 4. The buttons of the Main menu are always visible at the bottom of the display. Buttons and controls relating to the Sub Menus will appear in the top part of the display. • • • • • • • Notes Do not try to operate the touch screen using anything harder than your fi nger. This could damage the LCD. If you have diffi culty getting the touch screen to respond correctly, then try varying the length and pressure of your fi nger movements until you have more success. For more information about using a web browser to control the projector, see Confi g menu... Networking confi guration, later in this section. For information about how to connect the projector, see Connecting the projector in section 2. Installation, and Connections in section 6. Appendix.
Page 4.4 105-453B January 2007 4. Using the Menus Digital Projection LIGHTNING 35HD-T, 40HD-T User Manual Menu structure Show mode (p4) Show mode indicators Lamp status Warnings Input source LCD screen blank IP addresses Menu buttons.... Main menu Lamp menu (p6) Controls Lamp power slider Menu buttons... Shutter open Shutter close Lamp on Lamp off Maximum power Minimum power Lamp/lens memories Lens menu (p8) Controls Move Zoom Focus Menu buttons... Shutter open Shutter close Centre Calibration Stop all movement Lamp/Lens memories (lamp menu) Test patterns (image menu) Image menu (p9) Controls Test patterns Menu buttons... Shutter open Shutter close Contrast Brightness Gamma Test patterns Advanced image setup Advanced image setup (p14).... Controls Input window Input pan Menu buttons... Shutter open Shutter close Image orientation Image position Gamma Input preset Test Patterns Input Adjust Confi g menu (p18) Menu buttons... Networking confi g Detailed status Touchscreen calibration Reset IP addresses Engineering & Maintenance menu (p23) Controls Log fi les Menu buttons... Software update Software update should NOT be carried out except by, or with the supervision of, Digital Projection Service personnel. Main menu: (p4)
105-453B January 2007 Page 4.5 Digital Projection LIGHTNING 35HD-T, 40HD-T User Manual 4. Using the Menus Show mode When the projector is fi rst switched on, the control panel will be in Show mode, as shown below: In Show mode, these icons are displayed: Lamp status Lamp off Lamp off Lamp on Lamp on Shutter closed Shutter open Shutter closed Shutter open Input source Single/Dual/Twin mode Notes The buttons of the Main menu are always visible at the bottom of the display, as shown here. To go back to a previous menu option that is no longer visible, call up the menu again using the appropriate Main menu button. Main menu Show mode indicators Lamp status Warnings Input source LCD screen blank IP addresses Menu buttons.... Lamp menu Lens menu Image menu Confi g menu Engineering & Maintenance menu Show mode
Page 4.6 105-453B January 2007 4. Using the Menus Digital Projection LIGHTNING 35HD-T, 40HD-T User Manual Warnings If a projector fault is detected, the warning symbol will be displayed, with an explanatory message. LCD screen blank To blank the LCD screen, press and hold the Digital projection logo at the top of the screen for about two seconds. On release, the screen will blank. To restore the display, press anywhere on the screen. IP addresses The IP addresses of the two ethernet ports are shown. Notes
105-453B January 2007 Page 4.7 Digital Projection LIGHTNING 35HD-T, 40HD-T User Manual 4. Using the Menus Notes The buttons of the Main menu are always visible at the bottom of the display. To go back to a previous menu option that is no longer visible, call up the menu again using the appropriate Main menu button. Lamp menu Press the LAMP button on the Main menu: Lamp power To adjust the lamp power, touch and drag the red slider up and down, or for fi ne adjustment, press the arrow heads. The numerical value will change to grey until the projector hardware has responded, when the value will change to white. The minimum setting is 60%. To set maximum or minimum power, press the MAXIMUM or MINIMUM button. Lamp on Press the LAMP ON button. When you switch the lamp ON, the projector will reset, whilst the lamp strikes. This is to protect the control circuitry from the effects of the lamp strike pulse. Any settings made before the lamp was switched on will be retained. Lamp off Press the LAMP OFF button. Hold the button pressed until the button turns to yellow, then release. The lamp power will ramp down to minimum then go off after a further 3 seconds. Shutter open/closed Press the SHUTTER OPEN or SHUTTER CLOSE button. Lamp menu Controls Lamp power slider Menu buttons... Shutter open Shutter close Lamp on Lamp off Maximum power Minimum power Lamp/lens memories
Page 4.8 105-453B January 2007 4. Using the Menus Digital Projection LIGHTNING 35HD-T, 40HD-T User Manual Notes The Lamp/Lens memories are useful if you need to swap repeatedly and easily between the settings for a number of different lenses, or venues. Stored zoom settings will be accurate only if the lens is calibrated. (see next page) Lamp/Lens memories Press the LAMP/LENS MEMORIES button. Store To store the current Lamp power, Shutter status, Lens shift, zoom and focus settings for future recall, press and hold one of the fi ve numbered STORE buttons. The button will turn grey - hold it until it turns yellow. If you release the button before it turns yellow, the new settings will not be stored, and any previous settings will not be lost. Recall To recall a previously stored set of Lamp power, Shutter status, Lens shift, zoom and focus settings press one of the fi ve numbered RECALL buttons.