Home
>
Digital Projection
>
Projector
>
Digital Projection LIGHTNING 10sx And LIGHTNING 15sx User Manual
Digital Projection LIGHTNING 10sx And LIGHTNING 15sx User Manual
Have a look at the manual Digital Projection LIGHTNING 10sx And LIGHTNING 15sx User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 577 Digital Projection manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
The LIGHTNINGdisplay range of SUPER-HIGH-BRIGHTNESS DIGITAL VIDEO PROJECTORS LIGHTNING 10sx and LIGHTNING 15sx USER MANUAL Revision A - 23/08/99
Projector Serial No. ________________ Projector Model ________________ STAMP ANSI Light OutputLumens Uniformity% ANSI Contrast:1 Full Field Contrast:1 Signal ThroughputChecked à RGB Video RGB-S Composite Video YPrPb Computer RGBHV S-Video (Y-C) Lens Mount Operation Convergence Actual Zone Specification Zone A 1/4 A B 1/2 B C 3/4 C Colour Balance@6500k Overall Brightness Contrast Brightness Contrast R G B Approved for shipping __________________________ Date _______________ F00012 IssC Certificate of Conformance
Directives covered by this Declaration 89/336/EEC Electromagnetic Compatibility Directive, amended by 92/31/EEC & 93/68/EEC. 73/23/EEC Low Voltage Equipment Directive, amended by 93/68/EEC. Products covered by this Directive Large Screen Projector types LIGHTNING10sxand LIGHTNING15sx. Basis on which Conformity is being declared The products identified above comply with the protection requirements of the above EU directives, and the manufacturer has applied the following standards:- BS EN 50081-1: 1992 EMC Generic Emission Standard for Residential, Commercial and Light Industrial Equipment. BS EN 50082-1: 1992 EMC Generic Immunity Standard for Residential, Commercial and Light Industrial Equipment. BS EN 55022: 1995 - Limits and Methods of Measurements of Radio Disturbance Characteristics Information Technology Equipment. BS EN 60950: 1992 - Specification for Safety of Information Technology Equipment, including Electrical Business Equipment. The technical documentation required to demonstrate that the products meet the requirements of the Low Voltage Directive has been compiled by the signatory below and is available for inspection by the relevant enforcement authorities. The CE mark was first applied in 1999. Signed: Authority: D.J. Quinn, Product Development Director Date: 15th September 1999 Attention! The attention of the specifier, purchaser, installer, or user is drawn to special measures and limitations to use which must be observed when these products are taken into service to maintain compliance with the above directives. Details of these special measures are available on request, and are also contained in the product manuals. Declaration of Conformity LBV00056; Revision A - 23/08/99
From time to time revisions will be issued to this manual. To maintain a correct and up to date copy of the manual it is important that the instructions given in revision notices are carried out. The person carrying out the revision should complete the table below. Revision No Revision Details Date Revised Revision Record LBV00056; Revision A - 23/08/99
Please read the following before proceeding The Digital Projection LIGHTNINGdisplaysare Super-High-Brightness Video Projectors capable of producing images of superb brightness and clarity with the minimum of set-up time and operating support. The User Interface via the On Screen Display, is designed to allow the novice user rapid access to basic projector operation while providing the expert with the ability to tailor the performance to his exact requirements. An Outline of Contents is given overleaf which provides an overview of the five sections, A to E, in this manual and lists all the major topics covered along with their location. This outline allows the user to direct themselves to the appropriate section of this manual where a detailed contents page will provide the exact location of the topic required. Section identifiers are also provided on the outside edge of the pages to allow the quick location of individual sections. The user is strongly recommended to read Section A: Overview before unpacking or switching on the projector, paying particular attention to the safety warnings on pages A—3 and A—4. DisclaimerDigital Projection makes a sincere effort to ensure accuracy and quality of its published materials; however, no warranty, expressed or implied, is provided. Digital Projection disclaims any direct or indirect damages resulting from the use of any information in this manual. Introduction Introduction INTRODUCTION LBV00056; Revision A - 23/08/99
Digital Projection Limited, Greenside Way, Middleton, Manchester M24 1XX, UK. Registered in England No. 2207264, Registered Office: As Above Tel: +44 (0) 161 947 3300 Fax:+44 (0) 161 684 7674 E-Mail:[email protected], [email protected] Web Site:www.digitalprojection.co.uk Digital Projection Inc. 55 Chastain Road, Suite 115, Kennesaw, GA 30144. USA Tel: (USA) 770 420 1350 Fax: (USA) 770 420 1360 E-Mail: [email protected] Web Site: www.digitalprojection.com DMD and Digital Micromirror Device are trademarks of Texas Instruments Incorporated. IntroductionINTRODUCTIONLBV00056; Revision A - 23/08/99
Section A: Overview Packaging....................................................................AÑ1 Safety Advice...............................................................AÑ2 Initial Preparation........................................................AÑ5 Components.................................................................AÑ9 Section B: System Installation Installation Guidelines..................................................BÑ1 Switching On.................................................................BÑ9 Section C: System Operation Remote Control - Overview ..........................................CÑ1 LED Indicators...............................................................CÑ6 Menu Operation ...........................................................CÑ7 Main Menu - Overview ..............................................CÑ11 Channel Set-up Function ...........................................CÑ13 Image Mode...............................................................CÑ28 User Preferences.........................................................CÑ29 Test Patterns...............................................................CÑ31 Projector Status...........................................................CÑ33 Set Projector Address..................................................CÑ34 Add Computer ...........................................................CÑ35 Applying a New Signal Source ..................................CÑ41 Adjusting the Displayed Image .................................CÑ44 Addressing Multiple Projectors...................................CÑ47 Introduction Outline of Contents INTRODUCTION LBV00056; Revision A - 23/08/99
Section C: System Operation Computer Control .......................................................CÑ48 Switcher Operation.....................................................CÑ53 Palm Pilot Control Utility Operation...........................CÑ55 Section D: Advanced User Information Screen Illuminance......................................................DÑ1 DMDª Operation and Usage ......................................DÑ2 Lenses.........................................................................DÑ14 Cables & Connections ................................................DÑ19 Technical Specification..............................................DÑ22 Section E: Fault Finding & Maintenance Trouble Shooting...........................................................EÑ1 Maintenance ................................................................EÑ4 Appendix Quick Set-up Reference.......................................................i Menu System Review ........................................................iii Glossary.............................................................................vi IntroductionINTRODUCTIONLBV00056; Revision A - 23/08/99
Packaging.........................................................................AÑ1 Projector Packaging.....................................................AÑ1 Lens Packaging...........................................................AÑ1 Safety Advice....................................................................AÑ2 Compliance with Regulatory Bodies ...........................AÑ2 Safety Warnings ...........................................................AÑ3 Initial Preparation.............................................................AÑ5 Pre-Installation Check..................................................AÑ5 Remote Control Unit - Battery Installation ...................AÑ6 Remote Receiver ..........................................................AÑ7 Hard Wired Remote Adapter .......................................AÑ8 Components......................................................................AÑ9 Projector Case..............................................................AÑ9 LED Indicators.............................................................AÑ10 Arc Lamp ...................................................................AÑ10 Lenses.........................................................................AÑ11 Motorised Lens Mount................................................AÑ11 Electronics..................................................................AÑ12 Analogue Input Board ...............................................AÑ12 Digital Micromirror Devicesª....................................AÑ14 Cooling System ..........................................................AÑ14 Power Supplies...........................................................AÑ15 Hard Wired Remote Adapter .....................................AÑ14 Overview Section A: Overview OVERVIEW LBV00056; Revision A - 23/08/99