Digital Projection LIGHTNING 10sx And LIGHTNING 15sx User Manual

							Copying a Channel
DÑ6
Advanced User Information
ADVANCED
LBV00056; Revision A - 23/08/99
Message Box -
No Copy To channel
number has been entered
Locates cursor over
Copy To Field
Enter SelectedOK Selected
Place cursor over Copy To
and press Enter
Flyout Channel List -
Channel names & numbers
Select Destination Channel
using Cursor Keys, then
press Enter
Cancel SelectedCopy Channel
Dialogue Box
Copy Channel Selected
Channel Set-Up Menu 
						

							DÑ7
Advanced User Information
ADVANCED
LBV00056; Revision A - 23/08/99
Enters selected channel
into Copy To field
Place cursor over Copy To
field and Press Enter to
name destination channel
Select OKCopy Parameters - All
(Copies All  Parameters)Copy Parameters - Selected
(Copies Parameters with
checked boxes)
Confirmation Box
Destination Channel
already in use, press OK
to overwrite or Cancel to
return to Copy dialogue
Cancel
(Exit on remote)
Confirmation Box
Changes will be lost
Select OK
Coping cancelled,
user returned to higher
level menuChannel copied,
user returned to higher
level menu
Select OK
Select Destination Channel
using Cursor Keys, then
press Enter 
						

							Modifying a Channel
DÑ8
Advanced User Information
ADVANCED
LBV00056; Revision A - 23/08/99
Flyout list of
computer cards
Select type
If insufficient memory a
message box will appear:
Cannot select computer
card due to insufficient
memory. Need to delete a
COMPUTER entry from
the library of computer
cards or delete unwanted
channels. Check video box
Check video type
e.g. PAL, NTSC
Enter new name of channel
(if desired)
Cancel selected
Select Modify command
Channel Set-Up Menu
Modify Channel
dialogue boxCheck the computer
check box 
						

							DÑ9
Advanced User Information
ADVANCED
LBV00056; Revision A - 23/08/99
Change switcher address
and input (if required)
Select INFO, SIZE
POS or COMP mode
Return to MODIFY
channel dialogue box
CANCEL to return
to dialogue box
(EXIT on remote control)
Confirmation box: 
Changes will be lost.
Press OK to continue
or CANCEL to return
to dialogue box.
OK
returns to higher menu If channels 1,2,3 are being
overwritten and the input
number is not 1,2,3 a
message box will appear:
Input number for this
channel cannot be changedSelect OK
Confirmation box will
appear: Channel XX will
be updated. Press OK to
accept changes or CANCELto return to dialogue box
OK (to accept
and return to higher menu)
CANCEL
returns to dialogue box OK
returns to higher menu
CANCEL or
EXIT on remote
Enter new name of channel
(if desired) 
						

							Adding a Computer
DÑ10
Advanced User Information
ADVANCED
LBV00056; Revision A - 23/08/99
Press ENTER for
flyout list
Press Create/Modify
Computer name dialogue
appears. Key in user name,
Press OK
Add Computer dialogue
box. Computer name held
states NEW
Add Computer Selected
Main menu
Choose computer card
to modify, Press ENTER
Resolution mode field
flyout list appears
CANCEL selected
Insufficient memory to
create card (or new mode)
message box: 
Cannot create computer
card (/mode) due to
insufficient memory.
Need to delete an
unwanted COMPUTER
entry from the library of
computer cards.
Go to ADD COMPUTER
dialogue in menu or
delete unwanted channel
configurations.
OK selected
Returned to 
Add Computer
dialogue box. 
						

							DÑ11
Advanced User Information
ADVANCED
LBV00056; Revision A - 23/08/99
Confirmation Box:
Computer graphics card
will be created/updated.
Press OK  to proceed or
CANCEL to  ignore Cancel to ignore changes
EXIT on remote
Return to higher menuCard created/updated
user returned to higher
level menu
Select OK
Mode parameters
dialogue box appears
ADD COMPUTER
resolution mode field
appears stating NEW
Press Create/Modify
Choose mode to modify
Press ENTERConfirmation dialogue:
Duplicate computer card
name-Press OK to Edit
OK selectedOK selected
Computer name dialogue
appears. Key in user name,
Press OKResolution mode field
flyout list appearsCANCEL selected
Modify parameters
and press OK to
execute changes 
						

							Modifying a Computer Card
DÑ12
Advanced User Information
ADVANCED
LBV00056; Revision A - 23/08/99
EXIT on remote Select mode that is not
being used to display
the image using
ae buttons
and press ENTER
You will enter MODE
PARAMETERS
dialogue box, where a
message box will be
overlaid stating:
CAUTION changes in this
dialogue may prevent the
mode from being selected
by a computer signal.Enter CHANNEL
COMPUTER MODE
dialogue box
Select COMPMODE
Modify menu
If insufficient memory
a message box states:
Cannot create computer
mode due to insufficient
memory. Need to delete a
COMPUTER entry from
the library of computer
cards. Go to ADD
COMPUTER in menuSelect OK
Select OK to clear 
						

							DÑ13
Advanced User Information
ADVANCED
LBV00056; Revision A - 23/08/99
Select OK to clear
Modify parameters
Press SAVE AS button
Enter SAVE AS
dialogue box
If card data set is in ROM
it will be saved with a *
added to the name to
distinguish it from the
factory ROM version
Enter or change
mode name
OK to add new parameters
to computer or graphic card
If scan and sync polarity
are duplicated, confirmation
box will appear:
Duplicate mode -
Press OK to overwrite.
OK to overwrite store
CANCEL
CANCEL to return to
mode parameters dialogueIf insufficient memory
a message box will state:
Cannot create computer
mode due to insufficient
memory. Need to delete
a computer entry from
the library of computer
cards. Go to ADD
COMPUTER dialogue in
menu. (New mode will be
lost if channel is changed).OK
Return to higher level
Returned to Mode
Parameters dialogue box 
						

							SXGA 1.2 Wide Angle Lens
BASIC PARAMETERS
Throw Ratio
11.2 : 1
Minimum Screen Distance
23.6 m (11.80 ft)
Maximum Screen Distance
26.2 m (20.30 ft)
Full Beam Angle 22.60°
Rising/Falling Front
3±512 pixels
Aperture F/3
Effective Focal Length 27.2 mm
Distortion
4< 1.2%
Transmission > 92%
Centre MTF @ 33 lp/mm > 40%
Corner MTF @ 33 lp/mm > 30%
Maximum Object Radius 20.53 mm (0.81”)
MECHANICAL
Lens Extension
5267 mm (10.51”)
Maximum Size N/A
Notes
1Full active area width.
2Limits for specified performance. Does not include lens extension.
3Some limitations may apply depending on projector lens mount.
4Measured at 540mm.
5Distance from projector front panel to front of lens.
DÑ14
Advanced User Information
Lenses
ADVANCED
LBV00056; Revision A - 23/08/99 
						

							SXGA 1.5 - 2.0 Zoom Lens
BASIC PARAMETERS
Throw Ratio
11.5 - 2.0 : 1
Minimum Screen Distance
23 m (9.84 ft)
Maximum Screen Distance
212 m (39.37 ft)
Full Beam Angle 36.90° - 28.07°
Rising/Falling Front
3±512 pixels
Aperture F/3
Effective Focal Length 33.5 - 44.6 mm
Distortion
4< 1.2%
Transmission > 85%
Centre MTF @ 33 lp/mm > 40%
Corner MTF @ 33 lp/mm > 30%
Maximum Object Radius 20.53 mm (0.81”)
MECHANICAL
Lens Extension
5152 mm (5.98”)
Maximum Size 329 x 183 mm dia. (13” x 7.2”)
Notes
1Full active area width.
2Limits for specified performance. Does not include lens extension.
3Some limitations may apply depending on projector lens mount.
4Measured at 540mm.
5Distance from projector front panel to front of lens.
DÑ15
Advanced User Information
ADVANCED
LBV00056; Revision A - 23/08/99