Digital Projection Highlite 6000dsx User Manual

20 - MUTE PICTURE
Press to turn off the picture for a short period of time. Press again to restore the pic-
ture. Pressing and holding CTL, then pressing this button closes the light shutter
such that no light is emitted through the projection lens.
21 - KEYSTONE (R)
Press to display the Keystone Correction screen.
22 - AMPLITUDE (G)
Service personnel only.
23 - ENTRY LIST (B)
Press to display the Entry List screen.
24 - FOCUS (+/-)
While pressing and holding CTL, pressing this button allows you to...

27 - INFRARED TRANSMITTER
Direct the remote control toward the remote sensor on the projector cabinet.
28 - REMOTE JACK
Connect your remote control cable here for wired operation.
C—6
Overview
OVERVIEW
LBV00072; Revision A - 25/09/2001
OFF
+-
PICTUREADJUSTABC DEFGHI
JKL MNO PQR
STU
,.VWXWHITE BAL.IMAGE
ON POWER
MENU
ENTER
123
456
7
08ADDRESS
PROJECTOR
BS
28
27 

Direct Key Combinations
The CTL button can be used in conjunction with other remote control buttons to
provide alternative functions. A list of these combinations is provided below.
KEY COMBINATION ACTION
CTL + INPUT (1-10) Switches to selected signal found in the Entry List.
To enable this combination, you must first assign 
specific remote keys for direct input selection in 
the Entry Edit window.
CTL + ENTER  Displays the Entry Edit Command Window. Only
available while displaying the Entry List...

The Basic/Custom menu can be customised to meet your requirements.
Select ‘Projector Options’ - ‘Menu’ - ‘Page1’ - ‘Basic/Custom Menu Edit’ to dis-
play the menu editing screen.
Highlight your desired selection and press the ENTER button to place a check mark
next to the option. 
If you select an item with a solid triangle and press the ENTER button all submenu
items will also be selected.
You can press the ENTER button again to clear a check mark.
Up to 12 main items (not including submenu items) can be...

Slide Bar
Menu windows or dialog box typically have the following elements:
Title bar- Indicates the menu title.
Highlight- Indicates the selected menu or item.
Solid triangle- Indicates further choices are available. A highlighted triangle 
indicates the item is active.
C—9
Overview
Menu System Overview
OPERATION
LBV00072; Revision A - 25/09/2001
Radio Button
Title Bar
Tab
Highlight
Check Box
Cancel Button
Solid Triangle
OK Button 

-
Tab- Indicates a group of features in a dialog box. Selecting any tab brings its page
to the front.
Radio button- Use this round button to select an option in a dialog box.
Check box- Place a checkmark in the square box to turn the option On.
Slide bar- Indicates settings or the direction of adjustment.
OK button- Press to confirm your setting. You will return to the previous menu.
Cancel button- Press to cancel your setting. You will return to the previous menu.
Navigating the Menu System
Press the...

Menu Structure
C—11
Overview
OPERATION
LBV00072; Revision A - 25/09/2001
0 – 100
NTSC, Graphics NTSC, PAL/SECAM2.8,
PAL/SECAM, Natural 1/Natural 2 
Advanced Menu
Source Select
Adjust (Source)
Ref Adj
Factory Default
Projector Options
Help
Test Pattern
RGB1
RGB2
RGB3
Component (YCbCr)
Video1
Video2
S-Video1
S-Video2
RGB (DIGITAL)
SDI
Entry List
Switcher
Entry List When Switcher Control is
turned on:
Stand aloneBrightness
Contrast
Saturation
Color
Hue
Sharpness
V-Aperture
Gamma Correction
Color...

C—12
Overview
OPERATION
LBV00072; Revision A - 25/09/2001
SX6000: Auto / High-Bright / Variable   SX4000: Auto / VariableAdvanced Menu
Source Select
Adjust (Source)
Ref Adj
Factory Default
Projector Options
Help
Test Pattern
All Data / Current SignalIncluding Entry List Keystone
Lamp
Ref. White Bal.
Contents
Source Information
Projector Information
Lamp Mode
Lamp Output
Brightness R/G/B, Contrast R/G/B
Standalone / Master / Slave
Standalone / SW 1 Level / SW 2 Level
Contents
Cross Hatch, Gray Bars
Black...

Main Menu
The Main Menu provides access to sub-menus which allow you to control the 
projector and to view any system settings.
Source Select- enables selection of an input source.
Adjust (Source) - provides access to the image controls.
Ref Adj- provides access to Keystone, Lamp and Reference White settings.
Factory Default- takes you to the Factory Default options menu.
Projector Options- enables you to set projector options and other operating
options
PC Card Files- provides access to files stored on...

Source Select enables you to select an input source connected to the projector.
To select an input source use the up/down buttons on your remote control or the
projector cabinet to highlight the desired input type and press Enter. Available
options include: RGB1, RGB2, RGB3, Component (YCbCr), Video1, Video2, 
S-Video1, S-Video2, RGB Digital or SDI.
Alternatively Entry List may be selected which contains a list of the entry signals.
When in the Entry List window, use the up/down buttons on your remote...