Digital Projection Highlite 14000hd Users Manual
Here you can view all the pages of manual Digital Projection Highlite 14000hd Users Manual. The Digital Projection manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 81
E-81 8. Appendix 2 Specifications Model Number HIGHlite 14000HD Panel *1DMD® 1.25”3 Output Resolution 20481080 native resolution Lamp 2.0kW Bulb Type Short Arc Xenon Built in: Overheat Protection Lamp Over-Usage Protection Light Output 13,400 Lumens Full Light Output at 200 - 240V Brightness Uniformity >80% corner to center Contrast Ratio 1600 : 1 Full On / Off Lens Movement Motorized Horizontal and Vertical Lens Shift Motorized Zoom and Focus Built in Lens Shutter Lens Options *2L2K-12ZHB 104-700 1.25...
Page 82
E-82 8. Appendix 2 slots are for expansion.) MM-VIDEOVideo Input BNC1 (Composite Video) (Built in)Input BNC2 (S-Video) Input BNC3 (DVD Component) MM-RGBAnalog RGB Input BNC5 (shared with the component input connectors) (Built in)Audio Input RCA (L/MONO,R)1 (No Function) MM-DVIDigital RGB Input DVI-D1 (Optional Board)Audio Input Stereo Mini Jack1 (No Function) MM-SDISDI Input BNC2 (Optional Board)SDI Output BNC1 USB Port A Type1 LAN Port RJ-451 Remote Control In Stereo...
Page 83
E-83 Technische Daten Modellnummern Bedienfeld* 1 Ausgangsauflösung Lampe Lichtausgang Helligkeitsgleichmäßigkeit Kontrastverhältnis Linsenverschiebung Linsen-Optionen* 2 Bildformat Installation Abtastrate Eingangssignal MM-VIDEO (integriert) MM-RGB (integriert) MM-DVI (Zusatzplatine)HIGHlite 14000HD DMD ® 1,25” x 3 2048 x 1080 natürliche Auflösung 2,0 kW Blasen-Kurzbogen-Xenon Integriert: Überhitzungsschutz Lampenverwendungsschutz bei überschrittenen Betriebsstunden 13.400 ANSI Lumen Voller Lichtausgang...
Page 84
E-84 SDHV SMPTE 259M Pegel C HDTV SMPTE 292M (einschließlich 24sF, 24p) 4 Schlitze (eine Platine für die VIDEO-Platine und die analoge RGB-Eingangsplatine gehören zur Grundausstattung; 2 Schlitze sind für eine Erweiterung vorgesehen) Video Eingang BNC x 1 (Composite-Video) Eingang BNC x 2 (S-Video) Eingang BNC x 3 (DVD-Komponente) Analog RGB Eingang BNC x 5 (mit den Komponenten-Eingangsanschlüssen geteilt) Audio Eingang RCA (L / MONO, R) x 1 (ohne Funktion) Digital RGB Eingang DVI-D x 1 Audio Eingang...
Page 85
E-85 *1:Die zulässige Abweichung für RGB-Konvergenz (Bildpunkt-Abweichung) beträgt in der Mitte 1/2 Pixel; 3/4 Pixel oder weniger im Umfang (wenn sich der Projektions-Aufwärtswinkel auf 0˚ beläuft). *2:Bei Benutzung des Zoom-Objektives ist es empfehlenswert, den Projektor in einem Winkel von -15 bis +15 Grad von der Horizontale ausaufzustellen. *3:Diese Anschlüsse sind für eine künftige Erweiterung vorgesehen. Technische Daten können ohne vorherige Benachrichtigung geändert werden. Digital Light...
Page 88
E-88 Signal Resolution Frequency H. Refresh Rate MM- MM-RGB MM- MM- ( Dots ) ( kHz ) ( Hz ) VIDEO RGsB RGBS RGBHV YCrCb SDI DVI 8. Appendix 4 Compatible Input Signal List VIDEO NTSC – 15.7 60.0 A (Composite PAL/SECAM – 15.6 50.0 A S-Video) PAL60 – 15.7 60.0 A SDTV 480i 720 483 15.7 60.0 A (Colour2) 575i 720 575 15.6 50.0 A 480p 720 483 31.5 60.0FUUAU1 575p – 31.3 50.0FUUAU1 HDTV 1080i60 19201080 33.8 60.0FAA Analogue1080i50 19201080 28.1 50.0FAA...
Page 89
E-89 2Colour space for SDTV and HDTV via DVI will be RGB colour space - can be changed using Colour Matrix function. * SD-SDI and HD-SDI signals can be input when the optional MM-SDI has been installed. • At the time of shipping, adjustment is made to the standard signal of the display resolution/frequency; however, adjust- ment may be required depending on the type of personal computer. • SDTV and HDTV signals also support a vertical frequency of fV/1.001. • RGB signals support analog and DVI. • Please...
Page 90
E-90 8. Appendix Pin # Signal Name Function I/O1 NC Not used –2 RxD Reception data Input3 TxD Transmission data Output4 NC Not used –5 GND Ground potential GND6 NC Not used –7 RTS Transmission request Output8 CTS Transmission permission Input 9 NC Not used – Pin # Signal Name Function I/O1 NC Not used –2 RxD- Reception data - Input3 TxD+ Transmission data + Output4 NC Not used –5 GND Ground potential GND6 NC Not used –7 RxD+ Reception data + Input8 TxD- Transmission data - Output 9 NC Not used – 5Pin...