Digital Projection E-Vision Series User Guides

Digital Projection E-Vision series  USING THE REMOTE CONTROL  Operating Guide
Page Op_2Rev A     January 2012
Using the Remote ControlNotes
 Some options and controls may not 
be available due to settings in the 
menus.
 For full details of how to use the 
menu system, see later in this guide.
MENU controls
LENS controls
POWER controls
INPUT: select from the available video input signals
PICTURE: opens the Picture menu
AUTO SYNC: Projector will re-synchronise with the current input signal
ASPECT: select...

Digital Projection E-Vision series  USING THE MENUS  Operating Guide
Page Op_3Rev A     January 2012
Using the Menus
Use.the.buttons.on.the.projector.control.
panel.or.on.the.remote.control,.to.access.the.
menu.system.
To.open.or.close.the.on-screen.display.
(OSD),.press.MENU.
•
Notes
 Some menu options and controls 
may not be available due to settings 
in other menus. These will be 
shaded grey on the actual menu.
Remote controlProjector control panel
Navigating the menus
Select.a.menu.using
.and,...

Digital Projection E-Vision series  USING THE MENUS  Operating Guide
Page Op_4Rev A     January 2012
Notes
 Some menu options and controls 
may not be available due to settings 
in other menus. These will be 
shaded grey on the actual menu.
Submenus
Select.a.submenu.using
.and.
then.open.the.submenu.by.pressing.
ENTER.
The.name.of.the.submenu.is.shown.at.
the.top.of.the.menu.
To.close.the.submenu,.press.CANCEL/
RETURN.
•
•
•
Sliders
Use..or.to.adjust.the.value.• 

Digital Projection E-Vision series  USING THE MENUS  Operating Guide
Page Op_5Rev A     January 2012
Selecting parameters
Most.parameters.are.changed.by.selecting.
from.a.list:
Select.from.the.list.using
.and..
The.change.will.be.made.immediately.
•
•
Notes
 Some menu options and controls 
may not be available due to settings 
in other menus. These will be 
shaded grey on the actual menu.
Some.parameters.are.changed.by.selecting.
from.a.pop-up.menu.
Press.ENTER.to.open.the.pop-up.menu....

Digital Projection E-Vision series  USING THE MENUS  Operating Guide
Page Op_6Rev A     January 2012
Commands
To.use.a.command,.press.ENTER.•
Notes
 Some menu options and controls 
may not be available due to settings 
in other menus. These will be 
shaded grey on the actual menu.
In.this.example,
use..or.to.move.the.green.
highlight.to.No.or.Yes,
then.press.ENTER.to.confirm.your.
selection.
•
•
Editing fields
Some.features.require.a.text.or.numeric.field.
to.be.edited....

Digital Projection E-Vision series  A TOUR OF THE MENUS  Operating Guide
Page Op_7Rev A     January 2012
A Tour of  the Menus
Picture Menu
Picture Mode
Select.a.picture.mode.as.required.
Brilliant Colour
Select.0,.1.or.2,.as.required.
Brightness, Contrast, Colour, Tint, Sharpness
Adjust.the.sliders.for.these.settings,.as.required.
Reset
Press.ENTER.to.restore.all.settings.in.the.Picture.Menu.(except.Picture.Mode.and.Signal.
Type).to.their.factory.defaults....

Digital Projection E-Vision series  A TOUR OF THE MENUS  Operating Guide
Page Op_8Rev A     January 2012
Notes
 See also Using the Menus, earlier 
in this guide and Menu Map, later in 
this guide.
Picture MenuAdvance Setting Submenu
 Increasing the Red content will 
make the image feel ‘warmer’, Blue 
will make it feel ‘colder’.
Advance Setting Submenu
Signal Type
Set.this.to.Auto,.except.when.the.projector.has.problems.selecting.between.RGB,.
YCrCb.and.YPrPb.
Colour Temperature...

Digital Projection E-Vision series  A TOUR OF THE MENUS  Operating Guide
Page Op_9Rev A     January 2012
Film Mode
Set.this.to.Auto,.and.the.projector.will.automatically.detect:
3:2.pulldown.for.60Hz.signals.
2:2.pulldown.for.50Hz.signals
Set.this.to.Off,.to.disable.automatic.pulldown.detection.
Noise Reduction
Select.a.Noise Reduction.level.as.required.
Dynamic Black
Set.this.to.On.or.Off.as.required.
•
•
•
•
Notes
 The Film Mode setting is available 
only for interlaced signals on the 
Video or...

Digital Projection E-Vision series  A TOUR OF THE MENUS  Operating Guide
Page Op_10Rev A     January 2012
Signal Menu
Horizontal and Vertical Position, Phase, Clock
Adjust.the.sliders.for.these.settings,.as.required.
Reset
Press.ENTER.to.restore.the.four.settings.above.their.factory.defaults.
When.the.warning.message.appears,.use..or.to.move.the.green.highlight.to.
YES.or.NO,.then.press.ENTER.to.confirm.your.selection.
Resolution...

Digital Projection E-Vision series  A TOUR OF THE MENUS  Operating Guide
Page Op_11Rev A     January 2012
Notes
 See also Using the Menus, earlier 
in this guide and Menu Map, later in 
this guide.
 Overscan is used to compensate for 
noisy or badly defined image edges, 
by increasing the size of the image, 
to force the edges off-screen.
  It is always On for the Video and S-
Video inputs, and for 480i and 576i 
signals.
 The Video System setting is 
available only for signals on the 
Video and S-Video...