Digital Projection E-Vision Series User Guides

Rev A     January 2012
USER GUIDES
INSTALLATION AND QUICK-START GUIDE
CONNECTION GUIDE
OPERATING GUIDE
REMOTE COMMUNICATIONS GUIDE
112-457A
E-Vision series
High Brightness Digital Video Projector 

Rev A     January 2012
E-Vision series
High Brightness Digital Video Projector
INSTALLATION AND QUICK-START GUIDE
112-458A
BOOK CONTENTS
INSTALLATION AND QUICK-START GUIDE
About this Guide
Symbols used in this guide
Warnings
Notes 

Digital Projection E-Vision series  CONTENTS  Installation and Quick-Start Guide
Rev A     January 2012
CONTENTS
About this Guide ........................................................................\
...........Inst_1
Symbols used in this guide ..................................................................Inst_1
Warnings.........................................................................\
...............Inst_1
Notes.........................................................................\...

Digital Projection E-Vision series  ABOUT THIS GUIDE  Installation and Quick-Start Guide
Page Inst_1Rev A     January 2012
About this Guide
Please.read.this.guide.carefully.before.using.the.projector,.and.keep.it.handy.for.future.reference.
A.serial.number.is.located.on.the.side.of.the.projector..Record.it.here:.
Symbols used in this guide
Warnings
 ELECTRICAL WARNING: this symbol indicates that there is a danger of electrical shock\
 unless the instructions are closely 
followed.
 WARNING: this symbol...

Digital Projection E-Vision series  WHAT'S IN THE BOX?  Installation and Quick-Start Guide
Page Inst_2Rev A     January 2012
What’s in the Box?Notes
 Make sure your box contains 
everything listed. If any pieces are 
missing, contact your dealer.
 You should save the original box 
and packing materials, in case you 
ever need to ship your Projector.
 Only one power cable - dependent 
on the destination territory - will be 
supplied with the projector.
Remote control 
(112-377)
2x AAA batteries
User...

Digital Projection E-Vision series  GETTING TO KNOW THE PROJECTOR  Installation and Quick-Start Guide
Page Inst_3Rev A     January 2012
Getting to Know the Projector
Front and rear views
Notes
 The projector uses an infra-red 
remote control.
  Some of the controls are duplicated 
on the projector control panel, as 
shown on the next page.
 For full details of how to use the 
controls and the menu system, see 
the Operating Guide.
 The air filters should be cleaned or 
changed regularly, depending on...

Digital Projection E-Vision series  GETTING TO KNOW THE PROJECTOR  Installation and Quick-Start Guide
Page Inst_4Rev A     January 2012
Control panel and indicators
Some.of.the.controls.from.the.remote.control.are.duplicated.on.the.projector.control.panel,.as.
shown.on.the.right.
The CANCEL button has the same function as the RETURN button on the remote control.
The SOURCE and AUTO buttons have the same function as the INPUT and AUTO SYNC 
buttons on the remote control....

Digital Projection E-Vision series  CHANGING THE LENS, LAMPS AND COLOUR WHEEL  Installation and Quick-Start Guide
Page Inst_5Rev A     January 2012
Changing the lens, lamps and colour wheel
Removing the lens
Remove.the.lens.cap.
Push.in.the.lens.release.lever,.and.turn.the.lens.anti-clockwise.
Remove.the.lens.
Fitting the lens
Position.the.lens.so.that.the.label.marked.‘O’ .is.at.the.top,.and.gently.insert.it.all.the.way.
into.the.lens.mount.
Turn.the.lens.clockwise.until.it.clicks.into.place.
•
•
•
•...

Digital Projection E-Vision series  CHANGING THE LENS, LAMPS AND COLOUR WHEEL  Installation and Quick-Start Guide
Page Inst_6Rev A     January 2012
Changing the lamp
Remove.the.four.screws.securing.the.lamp.compartment.cover.
Open.the.lamp.compartment.
Unscrew.the.two.captive.screws.securing.the.lamp.module.
Pull.firmly.upwards.on.the.handle.to.remove.the.lamp.module.
Insert.a.new.lamp.module,.fasten.the.screws,.and.replace.the.lamp.compartment.cover.
Changing the colour wheel...

Digital Projection E-Vision series  POSITIONING THE SCREEN AND PROJECTOR  Installation and Quick-Start Guide
Page Inst_7Rev A     January 2012
Notes
 Always allow the lamp to cool for 
5 minutes before:
  - disconnecting the power 
- moving the projector
 Ensure that there is at least 
50cm (20in) of space between the 
ventilation outlets and any wall, 
and 10cm (4in) on all other sides.
  If ceiling mounting, ensure there 
is 30cm (12in) of space between 
the projector and ceiling.
 Do not stack the...