DiBoss Lt 40t5lph Instruction Manual

							ENGLISH
21
TELETEXT
TEXT On/OffPress the TEXTbutton to switch to TELETEXT. The initial
page or last selected page appears on the screen. The first
page number indicates your selection, while the second
shows the current page displayed.
1. Press TEXTbutton once, displays the TELETEXT
pages.
2. Press MIXbutton once more, displays the TELETEXT
pages superimposed on the TV picture. 
3. Press the TEXTbutton to switch off TELETEXT once
more, Text mode is off, and TV mode appears.
TOP textThe user guide displays four fields-red, green, yellow and
blue at the bottom of the screen. The yellow field denotes
the next group and the blue field indicates the next block.
Group/block/page selection
1. With the BLUEbutton you can progress from block to
block.
2. Use the YELLOWbutton to proceed to the next group
with automatic overflow to the next block.
3. With the GREENbutton you can proceed to the next
existing page with automatic overflow to the next
group. Alternatively the PRx x
button can be used.
4. 
The REDbutton permits to return to previous selection.Alternatively the PRy y
button can be used.  
FLOF textThe Teletext pages are colour coded along the bottom of the
screen and are selected by pressing the corresponding
coloured button.
Page selection
1. Press the INDEXbutton to select the index page.
2. You can select the pages, which are colour coded
along the bottom line with the same coloured buttons.
3. The PRx x
/PRy y
button can be used to select the
preceding or following page.
 
						

							22
TELETEXT
Special TELETEXT functions
Changes TELETEXT mode 
Only TELETEXT mode, text mode superimposed on
the TV picture, TV mode. Selects double height text.
Press this button to enlarge the top half of the page.
Press this button again to enlarge the bottom half of
the page.
Press this button again to return to the normal display.
Stops the automatic page change, which will occur if a
TELETEXT page consists of 2 or more sub pages. The
number of sub pages and the sub page displayed is,
usually, shown on the screen below the time. When
this button is pressed the stop symbol is displayed at
the top left-hand corner of the screen and the
automatic page change is inhibited. To continue press
this button again.
Return to index pageTEXT
MIX
Functions MENU
SIZE
HOLD
INDEX
Displays the TV picture on the screen while waiting for
the new TELETEXT page. The display will appear at the
top left hand corner of the screen. When the updated
page is available then display will change to the page
number.
Press this button to view the updated TELETEXT page.
UPDATE
When viewing a TV programme, press this button to
display the time at the top right hand corner of the
screen. Press this button again to remove the display.
In TELETEXT mode press this button to select and
hold or change a four-digit sub page number. This is
displayed along the bottom of the screen. Press this
button again to exit this function.
TIME
Press this button to display the concealed information,
such as solutions of riddles or puzzles.
Press this button again to remove the information from
the display.
REVEAL
 
						

							ENGLISH
23
External Equipment Connection
You can connect additional equipment, such as VCRs, camcorders etc. to your set.
Examples are shown below.
Antenna connection1. Connect RF out on the VCR to
the Antenna input on the rear of
the TV.
2. Connect the antenna cable to
the antenna in jack on the VCR.
3. Use the TV/AV button to select
TV mode.
SCART 2(AV 2)1. Connect the AV out jacks on
the AV device to the SCART 2
on the TV.
2. Use the TV/AVbutton to select
SCART2mode.  
3. Press the PLAYbutton on the
DVD.
SCART 1(AV 1)1. Connect the A/V out jacks on the 
AV device to SCART jack on the TV.
2. Use the TV/AVbutton to select 
SCART1mode.
3. Press the PLAYbutton on the VCR.
The VCR playback picture appears on 
the TV screen.
COMPONENT IN1. Connect a set of audio cables 
between the COMPONENTAUDIO IN (L, R)
jacks on the TV and the AUDIO OUT 
jacks on the set-top box.
2. Connect a set of video cables between the 
COMPONENT(Y, Pb(Cb), Pr(Cr)) jacks on the TV and the 
VIDEO OUT jacks on the set-top box.
3. Use the TV/AV button to select COMPONENTmode.
 
						

							24
External Equipment Connection
Connecting to HDMI (High Definition Multimedia Interface)
1. Connect an HDMI cable between the   
“HDMI IN” jack on the TV and the
HDMI OUT jack on the set-top box.
Please check that the HDMI source is 
powered on.
2. Press the TV/AV or TV/PCbutton to
select HDMImode.
S-VIDEO input  If using an S-VIDEOsource, the picture
quality will be improved over a video
source.
1. Connect the S-VIDEO output of a
VCR to the   S-VIDEOinput on the TV.2. Connect the audio cables from the
S-VIDEO VCR to the L (MONO) R
inputs on the TV.
3. Select S-VIDEOmode by pressing
the TV/AVbutton repeatedly.
4. Press the PLAYbutton on the VCR.
The VCR playback picture appears on the screen.
Headphone jackInsert the headphone plug to the headphone jack on the TV. You can listen to the
sound through the headphone; no sound from the speaker on the TV.  To adjust the
headphone volume, use the 
nVolume menu in the Sound menu.
Sub woofer outputConnect the cable of the sub woofer to the sub 
woofer output on the TV. 
You can listen to the bass well. To adjust the 
bass volume, use the Sub woofer menu 
in the sound menu.
 
						

							ENGLISH
25
Connecting the PC(HDMI, VGA) as a monitor
Picture adjustmentYou can adjust picture Contrast, Brightness,
Horizontal/Vertical position,
Clock, Phase, Auto and Reset as you prefer.
1. Press the TV/AVor TV/PCbutton to select the PC
mode.
2. Press the MENUbutton.
3. Press the PRx x
/PRy y
button to select the desired
picture item.
4. Press the Ï Ïq
q
button to make appropriate
adjustments.
Contrast 
This function is to adjust picture to light/dark.
Brightness 
This function is to adjust brightness of picture.
Temperature 
Temperature is a measure of the warmth of the image color.
Horizontal Position/Vertical Position
This function is to adjust picture to left/right and up/down 
as you prefer.
Clock
This function is to minimize any vertical bars or stripes visible 
on the screen background. And the horizontal screen size will 
also change.
Phase
This function allows you to remove any horizontal noise and 
clear or sharpen the image of characters.
Auto
This function is for the automatic adjustment of the screen 
position, clock and clock phase. The displayed image will 
disappear for a few seconds while the Auto-configuration is in process.
Note: Some signal from some graphics boards may not function properly. 
If the results are unsatisfactory, adjust your monitor’s position, clock 
and clock phase manually.
Reset
This function allows you to return to the good picture reproduction programmed 
at the factory and cannot be changed.
5. Press the TV/AVbutton to exit menu.
▲▼ ◀▶ MENUTV/AV
Contrastx x
0    Ï
Ï100      q
q100
y
y1024 X 768
48.4KHz   60.0HzAUTO
Contrast
Brightness
Temperature
H-position
V-position
Clock
Phase
AutoAUTO
Reset
 
						

							26
Connecting the PC(HDMI, VGA) as a monitor
PC INPUT1. Connect the PC IN cable (D sub jack) from the monitor output socket of the PC
to the PC/DTV input socket of the set.
2. Connect the PC AUDIO IN cable from the PC to thePC AUDIO IN of the set.
3. Press the TV/AV or TV/PCbutton to select PC ANALOG  mode.
4. Switch on the PC, and the PC screen appears on the set.
The set can be operated 
as the PC monitor.
Resolution
Note:
a. If possible, use the VESA 1024x768@60Hz video mode to obtain the best
image quality for your LCD monitor. If used under the other resolutions, some
scaled or processed pictures may appear on the screen. 
b. Some dot defects may appear on the screen, like Red, Green or Blue spots.
However, this will have no impact or effect on the monitor performance.
1024X768
1024X768
1024X768 XGA48.4KHz
56.5 KHz
60.2 KHz60Hz
70 Hz
75 Hz
ModeBest
ResolutionHorizontal
frequency (KHz)Vertical
frequency (Hz)
 
						

							Product Specifications
ModelLT-40H5LPH                         LT-40T5LPH
Main bodyHorizontal size 1135.2 mmHorizontal size 1265  mm
(With stand)Thickness       114.5(280) mmThickness 133(263)mm
Height 632.2(704.1)mm    Height      606(663) mm
Weight        28.3 (32.8)  kg     Weight      28.6(33.1) kg
Television systemPAL-BG, I, DK/ SECAM-BG, DK, L
Television programme VHF: 2~13 UHF: 21~69 Cable: S1~S41
LCD Panel 40” wide TFT LCD panel
Power consumption 180W
External antenna impedance 75Ω
Audio output 12W+12W
• HDMI IN   • S-VIDEO IN 
External IN/OUT ports• HEADPHONE JACK          • PC IN 
• PC AUDIO IN                      • SCART 1 IN
• SCART 2 IN                     
• SUB WOOFER OUT  
• ANTENNA IN                       • COMPONENT IN
AC Input
100-240V AC, 2.5A~1.5A, 50/60Hz
Note:
This product is designed and manufactured with high quality materials and
components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of-
life, should be disposed of separately from your household waste.
Please, dispose of this equipment at your local community waste
collection/recycling centre.
In the European Union there are separate collection systems for
used electrical and electronic product.
Please, help us to conserve the environment we live in!
27
ENGLISH
★All rights reserved for technical modifications.