DiBoss Lt 40t5lph Instruction Manual

							ENGLISH
11
Turning the TV On and OffStandby Setup: The AC power cord must be set up and
connected to have the TV in standby mode ready to be turned
on. Press the ON/OFF button on the side or front panel of the
TV to go into standby mode.
1. If the TV is in standby mode, press the POWER button
on the remote controller or the TV itself to turn the TV on.2. Press the POWER button again on the remote
controller or the TV itself to turn the TV off.
Note: If the TV is on and the POWER button is pressed 
to turn the TV off, the TV goes into standby mode.
Programme selectionYou can select a Programme number with the PRx x
/PRy y
button or NUMBER buttons.
Volume adjustmentPress the VOLÏ Ï
/VOLq q
button to adjust the sound level.
PÏ ÏPPress thePÏ Ï
Pbutton to view the last channel you were
watching.
Sound mute functionPress the  MUTEbutton. The sound is switched off and the
mute display  appears.
To cancel mute mode, press the MUTE button again,
VOLÏ Ï
/VOLq q
orSOUND(     )button.
On screen menu language selectionThe menu can be displayed on the screen in desired
language.
First select your language.
1. Press the  MENUbutton.
2. Select the Setupmenu.
3. Press the Ï Ïq
q
button to select Select the Setupmenu.    
4. Select the Language.
5. Press the Ï Ïq
q
button to select the Language.
6. Press the PRx x
/PRy y
button to select your desired
language. 
7. Press the TV/AVbutton.
All the on screen menu will appear in the selected language.
Basic Operation
 
						

							12
On Screen Menus and Display
1. Press the MENUbutton to display main menu. 
2. Press the PRx x
/PRy y
button to select menus-Picture, Sound, Special, Setup.
3. Adjust each menu with the Ï Ïq
q
button.
4. Press the MENUbutton to return to preceding menu.
5. Press the TV/AVbutton to finish adjusting menu.  
▲▼ ◀▶ MENUTV/AV
Main MenuPictureq
Soundq
Specialq
Setupq
▲▼ ◀▶ MENUTV/AV
PictureContrast               90
Brightness            75
Colour                  75
Sharpness            50
▲▼ MENUTV/AV
EqualizerFlat
Music
Movie
Speech
User
▲▼ ◀▶ MENUTV/AV
Auto ProgrammeSystem BG
Storage from 1
Start
▲▼ ◀▶ OKMENUTV/AV
Manual ProgrammeSystem                           BG
Channel          V/UHF        5
Fine                            ▶▶▶
Search                       ▶▶▶
Name                          
Storage                          1
▲▼ ◀▶ MENUTV/AV
SoundEqualizer                         ▶
Balance                           0
AVL                               Off
Surround Off
nVolume                     30
Sub Woofer                    0
▲▼ ◀▶ MENUTV/AV
SpecialInput TV
Auto Sleep                      Off
Blue Back On
Auto Wide                     Off
▲▼ ◀▶ MENUTV/AV
SetupAuto Programme           ▶
Manual Programme      ▶
Programme Edit           ▶
Language▶
0.1 0.5 1.5 5.010KHz
▲▼ ◀▶ MENUTV/AV
Programme Edit0  -----                     5  
1     6  
2                              7 
3                              8  -----
4                              9  -----
●
Delete ●
Copy
●
Move                ●
Skip
 
						

							ENGLISH
13
Setting up TV Programme
Once you have preset the programme, you will be able to
use the PRx x
/PRy y
or NUMBERbuttons to scan the
programme you programmed.
Programme can be tuned using Auto or Manual
programme menu.
Auto Programme  All programme that can be received are stored by this
method. It is recommended that you use Auto programme
during installation of this set.
1. Press the MENU button.
2. Select the Setupmenu.
3. Press the Ï Ïq
q
button to select the Setup menu.
4. Select the Auto Programme menu.
5. Press the Ï Ïq
q
button to select the Auto 
Programme menu.
6. Select a TV system with the Ï Ïq
q
button;
BG: (West Europe/Asia/M.East/Africa/Australia)
I    : (UK/Hong Kong/South Africa)
DK: (Russia/China/East Europe)
L: (France) 
7. 
Press the PRx x
/PRy y
button to select Storage from.8. Select the beginning programme number with thePRx x
/PRy ybutton or NUMBERbuttons.
9. Start Auto programme, press the  MENUbutton to
finish auto programme.
10. 
Press the  TV/AV button to finish Auto programme.11. Press the TV/AVbutton to return to normal TV
viewing.
▲▼ ◀▶ MENUTV/AV
Auto ProgrammeSystem BG
Storage from 1
Start
 
						

							14
Setting up TV Programme
Manual ProgrammeManual Programme lets you manually tune and arrange
the programme in whatever order you desire. Also you can
assign a programme name with 5 characters to each
programme number.
1. Press theMENUbutton.
2. Select the Setupmenu.
3. Select Manual Programmemenu.
4. Press the PRx x
/PRy y
button to select  System.
5. Select a TV system with the Ï Ïq
q
button.
BG: (West Europe/Asia/M.East/Africa/Australia)
I    :  (UK/Hong Kong/South Africa)
DK: (Russia/China/East Europe)
L: (France)
6. Press the PRx x
/PRy y
button to select Channel.  
7. Press the Ï Ïq
q
button to select V/UHF or Cableas
required. If possible, select the programme number
directly with the number buttons.  
8. Press the  PRx x
/PRy y
button to select Search.
Press the Ï Ïq
q
button to commence searching. If a
channel is found the search will stop.  
9. If this programme is the one required, press the
PRx x
/PRy y
button to select Storage.Select the
desired programme number with the Ï Ïq
q
button or
NUMBERbuttons.
10. Press the OK button to store it. The display Stored
will appear.
To store another programme, repeat steps 5 to 10.
▲▼ ◀▶ OKMENUTV/AV
Manual programmeSystem                           BG
Channel          V/UHF        5
Fine                            ▶▶▶
Search                       ▶▶▶
Name                          
Storage                          1
 
						

							ENGLISH
15
Setting up TV Programme
Programme  EditThis function enables you to delete, copy, move or skip
the stored programme.
Also you can move some programme to other
programme numbers or insert a blank programme data
into the selected programme number.
1. Press the MENUbutton.
2. Select the Setupmenu.
3. Press the Ï Ïq
q
button to select the Setup menu.
4. 
Press the PRx x
/PRy y
button select Programme  Edit.Select the programme name to edit with the PRx x
/PRy y
and Ï Ïq
q
.
Deleting a programme
1. Select a programme to be deleted with the
PRx x
/PRy y
or Ï Ïq
q
button.
2. Press the REDbutton twice. 
The selected programme is deleted, all the
following programme is shifted up one position.
Copying a programme
1. Select a programme to be copied with the
PRx x
/PRy y
or Ï Ïq
q
button.
2. Press the GREENbutton. 
All the following programmes are shifted down one
position.
Moving a programme
1. Select a programme to be moved with the
PRx x
/PRy y
or Ï Ïq
q
button.
2. Press the YELLOWbutton.
3. Move the programme to desired programme     
number with the  PRx x
/PRy y
or Ï Ïq
q
button.
4. Press the YELLOWbutton again to release this
function.
Skipping a programme number
1. Select a programme number to be skipped with the
PRx x
/PRy y
or Ï Ïq
q
button.
2. Press the CYANbutton. The skipped programme
turns to blue.
3. Press the CYANbutton again to release the
skipped programme.
Note: When a programme number is skipped it
means that you will be unable to select it using the
PRx x
/PRy y
button during normal TV viewing. If you
want to select the skipped programme, directly enter
the programme number with the NUMBERbuttons or
select it in the programme edit or table menu.
▲▼ ◀▶ MENUTV/AV
Programme  Edit0  -----                     5  
1     6  
2                              7 
3                              8  -----
4                              9  -----
●
Delete ●
Copy
●
Move                ●
Skip
 
						

							16
Picture Control
You can adjust picture Contrast, Brightness, Colour, Sharpness to the levels you
prefer.
Manual Picture Control1. Press the MENUbutton.
2. Select the Picture.
3. 
Press the PRx x
/PRy y
buttons to select a picture item.4. Press the Ï Ïq
q
buttons to adjust the picture condition
as you want.
5. Press the TV/AVbutton to store for the picture User.
PICTURE Effect1. Press the PICTURE(     )button. 
2. Press the PICTURE(     )button repeatedly to      
select Picture effect.
Each press of the button changes the screen display as
below.
Dynamic →Standard →Mild →Game →User
• Dynamic: Vivid Picture Appearance
• Standard: Standard Picture Appearance
• Mild: Softer Picture Appearance
• Game: External Video Game Picture Setup
• User: Manual Picture Setup
Auto Picture Control *The Picture options - Dynamic, Standard, Mild and
Game are programmed for good picture reproduction
at the factory and cannot be changed.
Selected Item
Contrast
Brightness
Color
SharpnessSetting Change
More darkness Ï0~100 qMore light
Less bright Ï0~100 qMore bright
Lower color intensity Ï0~100 qHigher color intensity
Soft picture Ï0~100 qHard picture
▲▼ ◀▶ MENUTV/AV
PictureContrast               90
Brightness            75
Colour                  75
Sharpness            50
 
						

							ENGLISH
17
Sound Control
You can select your preferred sound setting; Flat, Music,
Movie or Speech and you can also adjust the sound
frequency of equalizer, balance. If you switch AVL to on,
the set automatically keeps on an equal volume level even
if you change programme.
1. Press the MENU button.
2. Select the Soundmenu. 
3. Press the PRx x
/PRy y
button to select the desired
sound item; Equalizer, Balance, AVL Surround or
headphone Volume.
4. Press the Ï Ïq
q
button to make desired adjustment. 
5. Press the Ï Ïq
q
button in Equalizerto set the
Equalizer. 
6. Press the PRx x
/PRy y
button to select your
preferred setting ; Flat,Music,Movie,Speech orUser.To set the Equalizer User.
a. Select Userby pressing the PRx x
/PRy y
button.
b. Select a sound band by pressing the Ï Ïq
q
button.
c. Make appropriate sound level with the
PRx x
/PRy y
button.
d. Press the MENUbutton to return to preceding
MENU and the TV/AVbutton to return to normal
TV viewing.
7. Select the Balancemenu and adjust the balance of
speakers.
8. 
Select the AVL(Automatic Volume Leveler) menu On
or Off.
9. Select the Surroundmenu On or Off.
10. Select the n n
Volumemenu and adjust the volume
from headphone.
11. Select the Sub woofermenu to adjust the bass 
volume.(It is possible when the Sub woofer is 
connected to the set.)
SOUND Effect1. Press the SOUND(     )button. 
2. Press the SOUND(     )button repeatedly to select.
Each press of the button changes the screen display as below.
Flat →Music →Movie →Speech →User
Auto Sound Control* The sound Flat, Music, Movie and Speech are
programmed for good sound reproduction at the factory
and cannot be changed.
▲▼ ◀▶ MENUTV/AV
SoundEqualizer                         ▶
Balance                           0
AVL                               Off
Surround Off
nVolume                     30
Sub Woofer                     0
▲▼ MENUTV/AV
EqualizerFlat
Music
Movie
Speech
User
0.1 0.5 1.5 5.010KHz
 
						

							18
Other functions
TV, SCART1, SCART2 and S-VIDEO modes(You can’t set PC mode in this menu. Use the TV/AVbutton) External equipment inputs:S-VIDEO mode are used for
video devices like VCRs, DVDs, etc.), SCART mode is used
for SCART type devices.  
Note: If a VCR is connected to the antenna jack, use TV
mode. See External Equipment Connection section.
1. Press the MENUbutton.
2. Select the Specialmenu.
3. Press the PRx x
/PRy y
button to select Input.
4. Press the Ï Ïq
q
button to select TV, SCART1, SCART2
and S-VIDEO.
SCART1: AV device connected to the SCART1 jack.
SCART2: AV device connected to the TVs SCART2 jack.
S-VIDEO: S-VIDEO device connected to the TVs 
S-VIDEO Input.
To return to TV mode, press the TV/AVbutton.
Alternatively you can select the TV, SCART1, SCART2, 
S-VIDEO, COMPONENT, PC ANALOG, HDMI mode by
pressing the TV/AVbutton.
Auto sleepIf you select Auto sleep onthe set will automatically
switch itself to standby mode approximately ten minutes
after a TV Channel stops broadcasting.
1. Press the MENUbutton, select the Special menu.
2. Press the PRx x
/PRy y
button to select Auto sleep.
3. Press the Ï Ïq
q
button to select On.
4. Press the TV/AVbutton to return to normal TV
viewing.
Blue backProgramme without a programme signal appear in blue.
Auto wide (Aspect Ratio Control)Press the ARC(     )button to select a desired picture format.
Each press of the ARC(     )button, selects Auto Wide,
16:9, 14:9, ZOOM, 1:1 and Auto wide mode.
▲▼ ◀▶ MENUTV/AV
SpecialInput TV
Auto sleep                      Off
Blue back On
Auto wide                      Off
 
						

							ENGLISH
19
Other functions
Sleep timerYou don’t have to remember to switch the set off before you
go to sleep. The sleep timer automatically switches the set
to standby after the preset time elapses.
Press the SLEEPbutton to select the number of minutes.
The display will appear on the screen, followed by 0, 10, 20,
30, 60, 90, 120, 180 and 240. The timer begins to count
down from the number of minutes selected.
Note:
a. To view the remaining sleep time, press the SLEEPbutton
once.
b. To cancel the sleep time, Select 0 with the SLEEPbutton.
Sound output selectionIn VIDEO mode, you can select output sound for the left and
right loudspeakers. Repeatedly press the I/II button to select
the sound output.
L+R: Audio signal from audio L input is sent to left
loudspeaker and audio signal from audio R input is sent
to right loudspeaker.
L+L: Audio signal from audio L input is sent to left and right
loudspeakers.
R+R: Audio signal from audio R input is sent to left and right
loudspeakers.
PIP functionPIP will let you view two separate source inputs on your TV
screen at the same time.
Viewing the PIP picturePress the PIP(     )button. (Press the PIP(     )button again,
to turn PIP off.)
Selecting the PIP picture modePress the MODE(     )button to adjust the PIP/* picture mode.Each press the MODE(     )button, selects the 16:1, 9:1,
double window and multi picture mode.( Multi picture
mode is just available when the main picture is in AV mode.)
Moving the PIP picturePress the POSITION(     )button to adjust the position of sub picture in PIP mode.
Switching the main and PIP picturePress the SWAP(     )button to switch the main and sub picture in PIP mode.
Viewing the external source inputPress the INPUT(     )button to select the input source of sub picture in PIP mode.Press the PIP PRx/PIP PRybutton to select the programme desired in TV
mode of sub picture.
0B
 
						

							20
Other functions
Calling the programme listYou can check the programmes stored in the memory 
by displaying the programme LIST.
Displaying programme list
1. Press the LISTbutton to display the Programme list  
menu. The programme list appears on the screen. 
One programme list contains ten programmes as right.
Note :
a. You may find some blue programmes. 
They have been set up to be skipped by auto 
programming or in the programme edit mode.
b. Some programmes with the channel number 
shown in the programme list indicate there is no 
station name assigned.
Selecting a programme in the programme list
Select a progranne with the PRx x
/PRy y
or Ï Ïq
q
button.
Then press the OKbutton.
The set switches to the chosen programme number.
Paging through a programme list
There are 10 programme table pages in which contain 
100 programmes.
Pressing the PRx x
/PRy y
or Ï Ïq
q
button 
repeatedly turns the pages.
▲▼ ◀▶ OKMENUTV/AV
Programme list
0  -----                   5   
16   
2                            7   
3                            8  -----
4                            9  -----