DiBoss Lt 40t5lph Instruction Manual

ENGLISH
21
TELETEXT
TEXT On/OffPress the TEXTbutton to switch to TELETEXT. The initial
page or last selected page appears on the screen. The first
page number indicates your selection, while the second
shows the current page displayed.
1. Press TEXTbutton once, displays the TELETEXT
pages.
2. Press MIXbutton once more, displays the TELETEXT
pages superimposed on the TV picture. 
3. Press the TEXTbutton to switch off TELETEXT once
more, Text mode is off, and TV mode appears.
TOP textThe user guide...

22
TELETEXT
Special TELETEXT functions
Changes TELETEXT mode 
Only TELETEXT mode, text mode superimposed on
the TV picture, TV mode. Selects double height text.
Press this button to enlarge the top half of the page.
Press this button again to enlarge the bottom half of
the page.
Press this button again to return to the normal display.
Stops the automatic page change, which will occur if a
TELETEXT page consists of 2 or more sub pages. The
number of sub pages and the sub page displayed is,
usually, shown...

ENGLISH
23
External Equipment Connection
You can connect additional equipment, such as VCRs, camcorders etc. to your set.
Examples are shown below.
Antenna connection1. Connect RF out on the VCR to
the Antenna input on the rear of
the TV.
2. Connect the antenna cable to
the antenna in jack on the VCR.
3. Use the TV/AV button to select
TV mode.
SCART 2(AV 2)1. Connect the AV out jacks on
the AV device to the SCART 2
on the TV.
2. Use the TV/AVbutton to select
SCART2mode.  
3. Press the PLAYbutton on the...

24
External Equipment Connection
Connecting to HDMI (High Definition Multimedia Interface)
1. Connect an HDMI cable between the   
“HDMI IN” jack on the TV and the
HDMI OUT jack on the set-top box.
Please check that the HDMI source is 
powered on.
2. Press the TV/AV or TV/PCbutton to
select HDMImode.
S-VIDEO input  If using an S-VIDEOsource, the picture
quality will be improved over a video
source.
1. Connect the S-VIDEO output of a
VCR to the   S-VIDEOinput on the TV.2. Connect the audio cables from...

ENGLISH
25
Connecting the PC(HDMI, VGA) as a monitor
Picture adjustmentYou can adjust picture Contrast, Brightness,
Horizontal/Vertical position,
Clock, Phase, Auto and Reset as you prefer.
1. Press the TV/AVor TV/PCbutton to select the PC
mode.
2. Press the MENUbutton.
3. Press the PRx x
/PRy y
button to select the desired
picture item.
4. Press the Ï Ïq
q
button to make appropriate
adjustments.
Contrast 
This function is to adjust picture to light/dark.
Brightness 
This function is to adjust brightness...

26
Connecting the PC(HDMI, VGA) as a monitor
PC INPUT1. Connect the PC IN cable (D sub jack) from the monitor output socket of the PC
to the PC/DTV input socket of the set.
2. Connect the PC AUDIO IN cable from the PC to thePC AUDIO IN of the set.
3. Press the TV/AV or TV/PCbutton to select PC ANALOG  mode.
4. Switch on the PC, and the PC screen appears on the set.
The set can be operated 
as the PC monitor.
Resolution
Note:
a. If possible, use the VESA 1024x768@60Hz video mode to obtain the best
image...

Product Specifications
ModelLT-40H5LPH                         LT-40T5LPH
Main bodyHorizontal size 1135.2 mmHorizontal size 1265  mm
(With stand)Thickness       114.5(280) mmThickness 133(263)mm
Height 632.2(704.1)mm    Height      606(663) mm
Weight        28.3 (32.8)  kg     Weight      28.6(33.1) kg
Television systemPAL-BG, I, DK/ SECAM-BG, DK, L
Television programme VHF: 2~13 UHF: 21~69 Cable: S1~S41
LCD Panel 40” wide TFT LCD panel
Power consumption 180W
External antenna impedance 75Ω
Audio output...