Denon D M51dvs Operating Instructions

							61
ENGLISH
(3) Auto tuner presets
Use this to automatically search for FM broadcasts and store up to 40 st\
ations at preset channels 1 to 40.
NOTE:
• If an FM station cannot be preset automatically due to poor reception, u\
se the “Manual tuning” operation to tune in the station, then preset it
using the manual “Preset memory” operation.
BAND
PHONES
VOLUME
ON / STANDBY
DVD SURROUND RECEIVER   ADV-M51
TONE / SDB
FUNCTION MENU/SET+-
SURROUND / SELECTPUSH - PA R A M .
12
1Using the TUNER function, press and
hold the MENU/SET button of the main
unit for 2 seconds or longer.
• “AUTO PRESET?” and “–: NO/+:
START” will alternately appear on the
display of the main unit.
2Use the TUNING + button to select
“START”.
“SEARCH” flashes on the display and
searching begins.
“COMPLETED” appears once searching is
completed.
• Press the TUNING – button to cancel.
MENU / SET
Main unit
+
Main unit
(4) Listening to preset stations
Example:  Listening to the station preset at number P03 (This operation\
 is only possible from the remote control unit.)
1Use the “+” and “–” preset buttons to select preset numbe\
r
“3” or press the “3” button on the numeric keypad to display\
preset number “P03”. The “+” and “–” buttons on the main unit can be selectedwhen the preset mode has been set.
BAND
PHONES
VOLUME
ON / STANDBY
DVD SURROUND RECEIVER  ADV-M51
TONE / SDB
FUNCTION MENU / SET+-
SURROUND / SELECTPUSH - PA R A M .
1
+
-
TUNER
CH
Remote control unit
3D.AUX+-
Main unit
The functions of the “+” and “–” buttons on the main unit\
 changeaccording to whether the tuning or preset mode is set. When the
tuning mode is set, you can switch to the preset mode by pressing
the “+” button while pressing the BAND button.
BAND+
Main unit Main unit
+
-
+
-
A / V
A-B REPEAT
SEARCH MODE
ON
OFF
REPEAT RANDOM
CLEAR ZOOM
SLIDE MODE
PROG/ DIRECT MEMO BAND
MODE
FUNCTION
SURROUND
INPUT MODE
TEST TONE TUNER
CH
3
-+
21654
987
0
/ 10CALL+
10
SYSTEM MD
CDR TAPE
TUNER TV / VCR
VCR
NTSC/PAL
SLEEP
ENTER
CD SRS
EDIT
/
MENU
CHARAC.
REC
TIME
TITLE
TUNING /T V VOL
TV CH TV CH
TUNER
DVD
MD / LINE-1 TAPE / LINE-2
AUTO DECODE
VIRTUAL
DIRECT 5CH STEREO
STEREO D.AUXIN
/
SURR.
IN /
SURR.DVD
T     V
T V  IN
SOURCE
1
1
The preset buttons on the remote control unit (TUNER CH “+” and
“–”) can be used at any time.
A / V
SYSTEM MD CDR TAPE
TUNER
TV / VCR
IN/
SURR.
IN /
SURR.DVD
Set the remote
control selector
switches to A/V
and TUNER.

Denon  D-M51DVS  User Guide  Manual  
						

							62
ENGLISH
• The ADV-M51 is equipped with an on-screen display (“OSD”) function that\
 displays various types of information on the surround functions andthe disc on the screen when the function is set to DVD.
q Setup screen
• This is used to select the speaker system being used (quick system sett\
ing) and to change the function of the ADV-M51 and various settings
when playing discs (system setting change and DVD setting change).
• The setup screen can be used regardless of the currently set function.
w Display of disc information
• When the function is set to DVD, the OSD displays information on the dis\
c and appears when various playback functions are oper ated.
e Display of surround function
• When the function is set to DVD, information on the surround amplifier i\
s also displayed and can be operated.
• The OSD for the surround function (AV OSD) can be turned on and off. (The OSD for the setup screen and DVD disc information cannot be set to\
 
“OFF”.)
Set to “ON” upon shipment from the factory.
16ON-SCREEN DISPLAY
B
BAND
PHONES
VOLUME
ON / STANDBY DVD SURROUND RECEIVER   ADV-M51TONE / SDB
FUNCTION MENU / SET+-
SURROUND / SELECTPUSH - PARAM.
12
+
-
+
-
RC-936
A / V
3
A-B REPEAT
SEARCH MODE
ON
OFF
REPEAT RANDOM
CLEAR ZOOM
SLIDE MODE
PROG/ DIRECT MEMO BAND
MODE
S TAT U S
RETURN ANGLE AUDIO
SUB TITLE
SETUP TONE / SDBFUNCTION
SURROUND
INPUT MODE
TEST TONE
DVD TUNER
CH
3
-+
21654
987
0
/ 10CALL
ENTER
MUTING
+
10
DISPLAY MENUTOP MENU
SYSTEM MD
CDR TAPE
TUNER TV / VCR
SURROUND
PARAMETERCH SELECT VCR
NTSC/PAL
SLEEP
ENTER
CD SRS
EDIT
/
MENU
CHARAC.
REC
TIME
TITLE
TUNING /T V VOL
TV CH TV CH
TUNER
DVD
MD / LINE-1 TAPE / LINE-2
AUTO DECODE
VIRTUAL
DIRECT 5CH STEREO
STEREO D.AUX
-+VCR CH
IN
/
SURR.
IN /
SURR.DVD
T     V
T V  IN
SOURCE
9
8 2
1
7
\b+
-
1
2
1
With the function set to DVD, press the STATUS button of the
remote control for at least 2 seconds.
Press in the MENU/SET button on the main unit, then press
the MENU/SET button again for at least 2 seconds while
“STATUS” is displayed.
• “AV OSD ON 
0:1OFF” is displayed.
MENU / SETS TAT U S
Main unit Remote control unit
2
Turn the AV OSD on or off.
SURROUND / SELECTPUSH - PARAM.
Main unitRemote control unit
or 0:ON
or 
1:OFF
After several seconds, the display turns off and the setting is
made.
NOTES:
• Depending on the disc being played, the picture may be
disturbed when the OSD turns on. This is not a malfunction.
If this should happen, set the AV OSD to “OFF”.
• The OSD is also output to the VCR video output terminals. Do not perform setup or OSD operations while recording with a
video deck.

Denon  D-M51DVS  User Guide  Manual  
						

							63
ENGLISH
17USING THE ON-SCREEN DISPLAY
(1) Operating using the disc information OSD
1
2
3
In the play mode, press the DISPLAY button.
• The On-Screen Display appears.
• The picture on the TV screen switches each time the button ispressed.
• The items displayed differ from disc to disc.
Example: For DVDs
Use the and •,  \fcursor buttons to select the item you wish to change.
• The selected item is displayed with a yellow frame.
q For DVDs
“TITLE”, “CHAPTER”, “TITLE ELAPSED” can be selected.
w For video and music CDs
“TRACK” can be selected.
q Changing the elapsed time
Input using the number buttons, then press the ENTER button.
Example:  For 1 minute 26 seconds  /“00126”
w Changing the title, track or chapter
• For DVDs
Input using the number buttons, then press the ENTER button.
(For some discs it is not possible to change the title or chapter.)
• For video and music CDs Input using the number buttons. Playback starts from that track.
DISPLAY
Remote control unit
Remote control unit
Remote control unit
321
654
987
0
/ 10+
10
TUNER
DVD
MD / LINE-1 TAPE / LINE-2
AUTO DECODE
VIRTUAL
5CH STEREO
STEREO D.AUX
Example: For video and music CDs
• For the on-screen display for video CDs and music
CDs, only the disc time changes.
+
-
+
-
A / V
A-B REPEAT
SEARCH MODE
REPEAT RANDOM
CLEAR ZOOM
SLIDE MODE
PROG/ DIRECT MEMO BAND
MODE
FUNCTION
SURROUND
INPUT MODE
TEST TONE TUNER
CH
3
-+
21654
987
0
/ 10CALL+
10
TUNER TV / VCR
NTSC/PAL
SLEEP
ENTER
CD SRS
EDIT
/
MENU
CHARAC. TIME
TITLE
TUNING /T V VOL
TV CH TV CH
TUNER
DVD
MD / LINE-1 TAPE / LINE-2
AUTO DECODE
VIRTUAL
DIRECT 5CH STEREO
STEREO D.AUXIN
/
SURR.DVD
T     V
T V  IN
SOURCE
3
RC-936
3S TAT U S
RETURN ANGLE AUDIO
SUB TITLE
SETUP TONE / SDB
ENTER
MUTING
DISPLAY MENU
TOP MENU
SURROUND
PARAMETERCH SELECT
-+VCR CH
1
2
3
2
Use this function to display and
change information on the disc
(titles, chapters, time, etc.) 
A / V
SYSTEM MD
CDR TAPE
TUNER
TV / VCR
IN/
SURR.
IN /
SURR.DVD
Set the remote
control selector
switches to A/V
and DVD.
TRACK 01 / 10
26 : 11
S I NGL E   T IME TOTAL TIME
P I C T URE   MODE STANDARD S I NGL E  REMAIN 03 : 17
TOTAL TIME 06 : 15
TOTAL REMAIN 32 : 05
CHAPT ER 01/10
00 : 00 : 01
STANDARD
AUDI O                 :  OFF
SUBT ITLE   1/2  :  DOLBY  D  3/2/1 ENGLISH
01 : 10 : 59
00 : 00 : 01
00 : 40 : 59
TITLE   01/10
TITLE   TIME
CHAPT ER   T IME CHAPT ER  REMAI N T I TLE   REMAIN
PICTURE   MODE

Denon  D-M51DVS  User Guide  Manual  
						

							64
ENGLISH
(2) Adjusting the picture quality
• The quality of the picture when playing discs can be adjusted.
3S TAT U S
RETURN ANGLE AUDIO
SUB TITLE
SETUP TONE / SDB
ENTER
MUTING
DISPLAY MENU
TOP MENU
SURROUND
PARAMETERCH SELECT
-+VCR CH
1
1,2,3
1,2
M1
PICTURE  MODE
STD ANIME CINEMA M2 M3
ENTER1When playing a disc with the function set to DVD, press the
DISPLAY button to turn on the on-screen display, use the  •and  \f
cursor buttons to select “PICTURE MODE”, then press the
ENTER button.
• The picture quality adjustment screen appears.
• The on-screen display also turns on when the DISPLAY button is pressed in the stop mode.
Remote control unit Remote control unit
\
DISPLAY
Remote control unit
\
2
Use the 0and 1cursor buttons to select the item, then press the ENTER button.
Standard:
Both the picture quality and functions are set back to the standard sett\
ings set
upon shipment from the factory.
Anime:
This sets a brighter more vivid picture quality.
Cinema:
This sets a mellower picture quality.
Memory 1 to 3:
Picture quality settings you have adjusted can be stored at three memory\
positions. (Set at step 3)
0000
MEMORY1
CONTRAST
3
Selecting and adjusting the picture quality
Use the 
0and 1cursor buttons to select the picture quality item, then use the  •
and  \fcursor buttons to adjust the value.
• All the adjustments are stored in the memory. Contrast (–6 to +6) (factory default: 0):
This adjusts the contrast between light and dark portions of the picture\
.
Brightness (0 to +12) (factory default: 0):
This adjust the brightness (vividness) of the picture.
Color density (–6 to +6) (factory default: 0):
This adjusts the color density.
Hue (–6 to +6) (factory default: 0):
This adjusts the balance between green and red. (This setting does not \
affect
progressive scan outputs.)ENTER
Remote control unit Remote control unit
\
A / V
SYSTEM MD
CDR TAPE
TUNER
TV / VCR
IN/
SURR.
IN /
SURR.DVD
Set the remote
control selector
switches to A/V
and DVD.
NOTE:
• Depending on the disc being played, the picture or sound may be disturbe\
d when the on-screen display is displayed. This is not  a
malfunction. To complete the picture quality adjustment:
Press the DISPLAY button again.

Denon  D-M51DVS  User Guide  Manual  
						

							65
ENGLISH
2Use this function to play your favourite audio or video sections repeate\
dly.
(3) Playing Repeatedly
[1] Playing Repeatedly (Repeat Playback)
+
-
+
-
A / V
A-B REPEAT
SEARCH MODE
ON
OFF
REPEAT RANDOM
CLEAR ZOOM
SLIDE MODE
PROG/ DIRECT MEMO BAND
MODE
FUNCTION
SURROUND
INPUT MODE
TEST TONE
DVD TUNER
CH
3
-+
21654
987
0
/ 10CALL+
10
SYSTEM MD
CDR TAPE
TUNER TV / VCR
VCR
NTSC/PAL
SLEEP
ENTER
CD SRS
EDIT
/
MENU
CHARAC.
REC
TIME
TITLE
TUNING /TV VOL
TV CH TV CH
TUNER
DVD
MD / LINE-1 TAPE / LINE-2
AUTO DECODE
VIRTUAL
DIRECT 5CH STEREO
STEREO D.AUXIN
/
SURR.
IN /
SURR.DVD
T     V
T V  INSOURCE
9
8 2
1+
[2]-1,2
[1]-1
1In the play mode, press the REPEAT button.
• The display on the TV screen switches each time the button is
pressed, and the corresponding repeat play or stop mode is set. lights on the display when the repeat play mode is set. “ALL”
lights when the all repeat play mode is set.
• Normal playback
• Title repeated • Chapter repeated
• Repeat playback  cancelled
w For video and music CDs
• Normal playback
• Track repeated
• Entire disc 
repeated
• Repeat playback  cancelled
To return to normal playback:
Return to normal playback by pressing the REPEAT button until “REPEAT OFF” appears on the TV screen.
REPEAT
MEMO
Remote control unit
TRACK REPEAT
DISC REPEAT
REPEAT OFF
CHAPTER REPEAT
TITLE REPEAT
REPEAT OFF
q
For DVDs
A / V
SYSTEM MD
CDR TAPE
TUNER
TV / VCR
IN/
SURR.
IN /
SURR.DVD
Set the remote
control selector
switches to A/V
and DVD.

Denon  D-M51DVS  User Guide  Manual  
						

							66
ENGLISH
[2] Playing a Certain Section Repeatedly (A-B Repeat Playback)
1
2During playback, press the A-B REPEAT button.
• This sets start point A.
Press the A-B REPEAT button again.
• This sets end point B, and repeat playback of the A-B sectionstarts.
To return to normal playback:
Press the A-B REPEAT button until “A TO B CANCELLED” appears on the TV screen.
Remote control unit
A-B REPEAT ENTER
Remote control unit
A-B REPEATENTER
NOTES:
• Repeat playback may not work for some DVDs.
• The repeat playback and A-B repeat playback functions will not work for \
DVDs and video CDs for which the elapsed time is not s
hown
on the display during playback.
• In some cases, subtitles may not be displayed near the A and B points du\
ring A-B repeat playback.
A TO B SET A
A TO B SET B

Denon  D-M51DVS  User Guide  Manual  
						

							67
ENGLISH
2Use this function with video and music CDs to play the tracks in the des\
ired order.
2 This function does not affect with DVD.
(4) Playing Tracks in the Desired Order
1
2
3
Press the PROG/DIRECT button once in the stop mode.
• The program selection screen appears.
Use the number buttons to select the number you want to
program.
• Up to 20 tracks can be programmed.
Press the play button.
• The tracks start playing in the programmed order.
To return to normal playback:
Press the stop button to stop programmed playback, then press the PROG/D\
IRECT button.
When the play button is next pressed, normal playback begins from the be\
ginning of the disc.
Clearing individual tracks from the program:
Press the stop button to stop programmed playback.
Now press the CLEAR button to clear the last track programmed.
Clearing the entire program:
The entire program is cleared when the power is turned off or the disc i\
s unloaded.
The entire program can also be cleared by pressing the stop button to st\
op programmed playback then pressing the PROG/DIRECT bu tton.
Checking the programmed tracks:
Press the CALL button to display the programmed tracks in steps.
Press number button “5”.
Remote control unit
321
654
987
0
/ 10+
10
TUNER
DVD
MD / LINE-1 TAPE / LINE-2
AUTO DECODE
VIRTUAL
5CH STEREO
STEREO D.AUX
DVD1
Remote control unit
Press number button “+10”. Press number button “2”.
Remote control unit
PROG/ DIRECT
MODE
+
-
+
-
A / V
A-B REPEAT
SEARCH MODE
REPEAT RANDOM
CLEAR ZOOM
SLIDE MODE
PROG/ DIRECT MEMO BAND
MODE
S TAT U S FUNCTION
SURROUND
INPUT MODE
TEST TONE
DVD TUNER
CH
3
-+
21654
987
0
/ 10CALL+
10
SYSTEM MD
CDR TAPE
TUNER TV / VCR
NTSC/PAL
SLEEP
ENTER
CD SRS
EDIT
/
MENU
CHARAC.
REC
TIME
TITLE
TUNING /T V VOL
TV CH TV CH
TUNER
DVD
MD / LINE-1 TAPE / LINE-2
AUTO DECODE
VIRTUAL
DIRECT 5CH STEREO
STEREO D.AUXIN
/
SURR.
IN /
SURR.DVD
T     V
T V  INSOURCE
9
8 2
1
7
\b
+
-
1
2
3
A / V
SYSTEM MD CDR TAPE
TUNER
TV / VCR
IN/
SURR.
IN /
SURR.DVD
Set the remote
control selector
switches to A/V
and DVD.
1                                    _ _
B
INPUT : 0 - 9 , + 1 0 PROGRAM
MODE    :    NORMAL
NO.                               TRACK     
TOTAL  TIME    :      - - :
 - -
CLEAR : CLEAR  BUTTON
INPUT : 0 - 9 , + 1 0 INPUT : 0 - 9 , + 1 0
INPUT : 0 - 9 , + 1 0
PROGRAM
MODE    :    NORMAL MODE    :    NORMAL MODE    :    NORMALPROGRAM
PROGRAM
NO.                               TRACK      NO.                               TRACK      NO.                               TRACK     
1                                    0 5
TOTAL  TIME    :      0 5 :
 50
CLEAR : CLEAR  BUTTON TOTAL  TIME    :      0 5 
:
 50
CLEAR : CLEAR  BUTTON TOTAL  TIME    :      0 9 
:
 5 5
CLEAR : CLEAR  BUTTON
B
1                                    0 5
2                                    1 _
2                                    
B
1                                    0 5
2                                    1 2
3                                    _ _
B
Example: To program tracks 5 and 12

Denon  D-M51DVS  User Guide  Manual  
						

							68
ENGLISH
2Use this function with video and music CDs to play the tracks in random \
order.
2 This function does not affect with DVD.
(5) Playing Tracks in the Random Order
1
2In the stop mode, press the RANDOM button.
• The random play screen appears.
Press the PLAY (
1) button.
• The tracks start playing in random order.
• Random playback is not possible for some discs. To return to normal playback:
Press the STOP (
2) button to stop random playback, then press the RANDOM button once.
RANDOM
BAND
Remote control unit
DVD1
Main unit Remote control unit
RANDOM ON
+
-
+
-
A / V
3
A-B REPEAT
SEARCH MODE
REPEAT RANDOM
CLEAR ZOOM
SLIDE MODE
PROG/ DIRECT MEMO BAND
MODE
S TAT U S FUNCTION
SURROUND
INPUT MODE
TEST TONE
DVD TUNER
CH
3
-+
21654
987
0
/ 10CALL
MUTING
+
10
SYSTEM MD
CDR TAPE
TUNER TV / VCR
NTSC/PAL
SLEEP
ENTER
CD SRS
EDIT
/
MENU
CHARAC. TIME
TITLE
TUNING /T V VOL
TV CH TV CH
TUNER
DVD
MD / LINE-1 TAPE / LINE-2
AUTO DECODE
VIRTUAL
DIRECT 5CH STEREO
STEREO D.AUXIN
/
SURR.
IN /
SURR.DVD
T     V
T V  INSOURCE
9
8 2
1
7
\b
+
-
1
2
A / V
SYSTEM MD CDR TAPE
TUNER
TV / VCR
IN/
SURR.
IN /
SURR.DVD
Set the remote
control selector
switches to A/V
and DVD.

Denon  D-M51DVS  User Guide  Manual  
						

							69
ENGLISH
[1] Listening to Recorded MP3 CD/CD-R/CD-RW
2There are many music distribution sites on the internet from which music\
 files in MP3 format can be downloaded. Music downloade d as
instructed on the site and written onto a CD-R/RW disc can be played on \
the ADV-M51.
If music recorded on commercially available music CDs is converted on a \
computer into MP3 files using an MP3 encoder (conversio n software),
the data on a 12 cm CD is reduced into about 1/10 the amount of the orig\
inal data. Thus, when written in MP3 format, the data of about 10
music CDs can fit onto a single CD-R/RW disc. A single CD-R/RW disc can \
contain over 100 tracks. Values when 5-minute tracks are converted with a standard bit rate of 128\
 kbps into MP3 files and using a CD-R/RW disc with a c apacity
of 650 MB.
(6) MP3 WMA Playback
1Load the CD-R/RW disc on which the MP3 format
music files have been written into this unit. (See page
39.)
• When the disc is loaded in the ADV-M51, the disc
information screen appears.
• If there are multiple folders, proceed to step  2.
• If there are no folders on the disc (if the disc only contains MP3 files), proceed to step  3.
All the folders recorded on the disc are displayed.
(The folders are not displayed by layer.)
0
ROO T
1
F OLDER1
2
F OLDER2
3
F OLDER3
4
F OLDER4
5
F OLDER5
ROO T
DISC  INFORMATION
PLAY  MODE
SINGLE  ELAPSED DECISION : ENTER  BUTTON
SELECT : FOLDER
:   --:--
B
F OLDER1
F OLDER 2
F OLDER 3
F OLDER4
F OLDER 5 0
..
1
MP3 _0 1
2MP3 _0 2
3MP3 _0 34MP3 _045MP3 _0 5
ROO T
PLAY  MODE FOLDER
SINGLE  ELAPSED
SELECT : DECISION : ENTER  BUTTON
DISC  INFORMATION
:   --:--
B
ENTER2Use the •and \fcursor buttons to select the folder
containing the file(s) you want to play, then press the
ENTER button.
To change the folder
Use the  •cursor button to select “ROOT” at the
upper right of the screen, then press the ENTER
button. The screen in step  1reappears. Select the
desired folder.
Remote control unit Remote control unit
\
-
A / V
3S TAT U S
RETURN ANGLE AUDIO
SUB TITLE
SETUP TONE / SDBFUNCTION
SURROUND
INPUT MODE
TEST TONE
DVD
0/10CALL
ENTER
MUTING
+
10
DISPLAY MENUTOP MENU
SYSTEM MD
CDR TAPE
TUNER TV / VCR
SURROUND
PARAMETERCH SELECT
-+VCR CH IN
/
SURR.
IN /
SURR.
DVD
9
8 2
1
7
\b+
-
2,3
3BAND
PHONES
VOLUME
ON / STANDBY
DVD SURROUND RECEIVER   ADV-M51
TONE / SDB
FUNCTION MENU / SET+-
SURROUND / SELECTPUSH - PARAM.
11
3

Denon  D-M51DVS  User Guide  Manual  
						

							70
ENGLISH
F OLDER1
F OLDER 2
F OLDER 3
F OLDER4
F OLDER 50
..
1
MP3 _0 1
2MP3 _0 2
3MP3 _0 34MP3 _045MP3 _0 5
ROO T
PLAY  MODE FOLDER
SINGLE  ELAPSED
SELECT : DECISION : ENTER  BUTTON
DISC  INFORMATION
:   --:--
B
DVD13
Use the •and 
\fcursor buttons to select the MP3 file you
want to play, then press the PLAY (
1) button or ENTER
button.
• Playback starts.
The display can be switched between the single elapsed
time and the single remaining time by pressing the
DISPLAY button.
Programmed playback is not possible with MP3 discs.
To change the MP3 file
Press the STOP button, then use the  •and 
\fcursor
buttons to reselect the desired MP3 file.
To set the random play mode
In the stop mode, press the RANDOM button.
Then press the PLAY (
1) button or ENTER button.
To set the repeat mode
The repeat mode changes each time the REPEAT button is
pressed.
NORMAL 
Æ TRACK REPEAT 
ÆFOLDER REPEAT
≠
To return to the initial disc information screen
Press the STOP (
2) button, use the  •cursor button to
select “ROOT” at the upper right of the screen, then press
the ENTER button.
The screen in step  1reappears.
Remote control unit
Remote control unit
Main unit
ENTER
\
\
Remote control unit
NOTES:
• The ADV-M51 is compatible with the “MPEG-1 Audio Layer 3” standards (sam\
pling frequency of 32, 44.1 or 48 kHz). It is not compatiblewith such other standards as “MPEG-2 Audio Layer 3”, “MPEG-2.5 \
Audio Layer 3”, MP1, MP2, etc.
• It may not be possible to play some CD-R/RW discs due to disc properties\
, dirt, warping, etc.
• The digital signals output when playing MP3 files are MP3 signals conver\
ted into PCM, regardless of whether the audio output p resenting
is set to “normal” or “PCM conversion”. The signals are outp\
ut with the same sampling frequency as that of the music source.
• In general, the higher an MP3 file’s bit rate, the better the sound quality. On the ADV-M51, we recommend using MP3 files reco rded with
bit rates of 128 kbps or greater.
• MP3 files may not be played in the expected order, since the writing software may change the position of the folders and \
the order of the files when writing them on the CD-R/RW.
• Manual search and programmed playback are not possible with MP3 discs.
• When writing MP3 files on CD-R/RW discs, select “ISO9660 level 1” \
as the writing software format. This may not be possible with some types of writing software. For details, refer to the writing software’\
s usage instructions.
• With the ADV-M51 it is possible to display folder names and file names on the screen like titles. The ADV-M51 can display up to 11 characters, consisting of numbers, capital letters, and the “_” (\
underscore) mark.
• If recorded in a format other than “ISO9660 level 1”, normal displ\
ay and playback may not be possible. In addition, folder and file names including other symbols will not be displayed properly.
• Be sure to add the extension “.MP3” to MP3 files. Files cannot be \
played if they have any extension other than “.MP3” or if they have no extension. (with Macintosh computers, MP3 files can be played by add\
ing the extension “.MP3” after the file name consisting of up
to 8 capital or numbers and recording the files on the CD-R/RW.)
• Do not apply stickers, tape, etc., to either the label side or the signa\
l side of CD-R/RW discs. If adhesive gets on the surface of a disc, the disc may get stuck inside the ADV-M51 and be impossible to eject.
• The ADV-M51 is not compatible with packet write software.
• The ADV-M51 is not compatible with ID3-Tag.
• The ADV-M51 is not compatible with play lists.

Denon  D-M51DVS  User Guide  Manual