Denon D M51dvs Operating Instructions

							ENGLISH
51
Surround parameters (1)
DOLBY VS (Dolby Virtual Speaker mode)•REF (Reference mode)
This is the standard mode.
• WIDE (Wide mode)
This mode expands the front channel sound field.
D.COMP. (Dynamic range compression) •This parameter adjusts the dynamic range of the Dolby
Digital or DTS sound. When listening with the volume
turned relatively low, at night for example, set this to the
“HI” side to lower the peak of the sound and amplify the
quieter sounds, narrowing the dynamic range and making
the sound easier to listen to. Set to  “OFF” to turn this
function off.
• With DTS sources, only displayed for sources compatible
with dynamic range compression.
LFE (Low Frequency Effect): •Program source and adjustment range
1. Dolby Digital : –10 dB to 0 dB
2. DTS Surround : –10 dB to 0 dB
• When Dolby Digital encoded software is played, it is
recommended that the LFE LEVEL be set to 0 dB for correct
Dolby Digital playback.
• When DTS encoded movie software is played, it is
recommended that the LFE LEVEL be set to 0 dB for correct
DTS playback.
• When DTS encoded music software is played, it is
recommended that the LFE LEVEL be set to –10 dB for
correct DTS playback.
WideNarrow
OFF LOW MID
HI
Dynamic range
6
Select and set the surround
parameters.
(On the remote control unit, use the
0, 1cursor buttons to set the
parameters.)
If nothing is done for 6 secondsfrom when the parameter is
displayed, the normal display
reappears.
SURROUND / SELECTPUSH - PARAM.
Main unit
BSetting the DOLBY VS mode
\fS REF WIDE
The selected mode flashes.
The mode is not displayed if it cannot be selected.
BD.COMP. setting
BSetting the LFE level
The LFE level can be adjusted in steps of 1 dB between–10 dB and 0 dB.
BDEFAULT setting
When  “YES” is selected, the settings are restored to the
factory defaults.
When the surround parameters are displayed, use the  •and 
\f
cursor buttons on the remote control unit to switch to previous or
following items.
Once the surround parameters have been set, stop operating the buttons. After several seconds, the normal display reappears and
the settings are automatically entered.
OFFLOWMIDHI
,/
,/
-10-50... ...
YESNO
,/
D.COMP. OFF
LFE 0dB
DEFAULTY/N
DownloadedTFromTTheatreSystem-Manual.comTManuals
Denon  D-M51DVS  User Guide  Manual  
						

							ENGLISH
52
[2] 2-channel mode settings
•When 2-channel signals are input, one of two playback modes can be selec\
ted and set according to the 2-channel mode setting, Virtual 1 or
Virtual 2. (The Virtual 1 mode is set by factory default.)
Virtual 1 : 2-channel sources are played in virtual surround using Dolby \
Pro Logic  IICinema processing.
Virtual 1 : 2-channel sources are played in virtual surround using Dolby \
Pro Logic processing.
BAND
PHONES
VOLUME
ON / STANDBY
DVD SURROUND RECEIVER  ADV-M51
TONE / SDB
FUNCTION MENU / SET+-
SURROUND / SELECTPUSH - PARAM.
1,2,3
RC-936
A / V
3S TAT U S
RETURN ANGLE AUDIO
SUB TITLE
SETUP TONE / SDBFUNCTION
SURROUND
INPUT MODE
TEST TONE
DVD
ENTER
MUTING
0
DISPLAY MENUTOP MENU
SYSTEM MD CDR TAPE
TUNER TV / VCR
SURROUND
PARAMETERCH SELECT
-+VCR CH
IN /
SURR.
IN /
SURR.DVD
9
8 2
1
\b
6+
-
1
3
2
NOTES:
•The 2-channel mode cannot be set when Dolby Digital or DTS
5.1-channel signals.
• The 2-channel mode is set and stored in the memory individually
for the different functions.
1
Set the surround mode to “DOLBY VIRTUAL SPEAKER”
(“DOLBY VS”).
•The normal display reappears after the surround mode is
displayed.
SURROUND / SELECTPUSH - PARAM.SURROUND
Main unit Remote control unit
2Press the SURROUND PARAMETER
button and select the 2-channel
mode.SURROUND / SELECTPUSH - PARAM.
Main unit
2 \fIRTUAL1
This can be selected if there is no
digital input signal, if the digital
input is a PCM or Dolby Digital 2-
channel signal and if the input is
analog.SURROUND
PARAMETER
Remote control unit
3
Turn the SURROUND/SELECT control on the main unit or use
the 
0and 1cursor buttons on the remote control unit to
select the desired 2-channel mode.
SURROUND / SELECTPUSH - PARAM.
Main unit Remote control unit
VIRTUAL 1 VIRTUAL 2
Once the surround parameters have been set, stop operating the
buttons. After several seconds, the normal display reappears and
the settings are automatically entered

Denon  D-M51DVS  User Guide  Manual  
						

							ENGLISH
53
Surround parameters (2)
1. VIRTUAL1 (Virtual 1 mode)In this mode, 2-channel sources are played with Dolby Pro Logic
II Cinema processing. This mode is suited for playing movie
sources recorded in Dolby Surround and regular stereo sources.
2. VIRTUAL2 (Virtual 2 mode) In this mode, 2-channel sources are played with Dolby Pro Logic
processing. This mode is compatible with regular Dolby Pro
Logic playback. With it, the recorded playback image of sources
recorded in Dolby Surround is recreated faithfully.
NOTE:
•If noise is generated for interactive and other high bit rate
sources when playing DVDs or D.AUX digital input signals in the
Dolby Virtual Speaker mode, set “LINE-1/LINE-2 REC OUT”
under  “[5] Function settings” at “SYSTEM SETUP” on pages 38
and 39 to “Off”.
(When this is done, analog recording in the Dolby Virtual Speaker
mode is not possible.)
(2) Playing in the DENON original surround modes
• This unit is equipped with a high performance DSP (Digital Signal Proce\
ssor) which uses digital signal processing to synthetica lly recreate the
sound field. One of 3 preset surround modes can be selected according to\
 the program source and the parameters can be adjusted  according
to the conditions in the listening room to achieve a more realistic, pow\
erful sound. These surround modes can also be used for program sources
not recorded in Dolby Surround Pro Logic or Dolby Digital.
* 1
* 2
* 3 ROCK ARENA
JAZZ CLUBVIDEO GAME
Use this mode to achieve the feeling of a live concert in an arena with \
reflected sounds coming from all directions.
This mode creates the sound field of a live house with a low ceiling and\
 hard walls. This mode gives jazz a very
vivid realism.
Use this to enjoy video game sources.
Depending on the source being played, the effect may not be very strong.\
In such cases, try other surround modes without paying too much attentio\
n to their names and choose the one you feel is best.
NOTE 1:  When playing sources recorded in monaural, the sound is one-sided if onl\
y one channel (left or right) is input, so input signals to both channels.
Personal Memory Plus
This set is equipped with a personal memorize function that automaticall\
y memorizes the surround modes and input modes selected for the
input different sources. When the input source is switched, the modes se\
t for that source last time it was used are automatical ly recalled.
• Settings automatically stored in the memory for the individual input fun\
ctions using the Personal Memory Plus function:
q Surround mode (including 2-channel decode mode and Dolby Pro Logic  IImode settings)
w Input mode selection function
The surround parameters, TONE/SDB control settings and playback level ba\
lance for the different output channels are memorized for each
surround mode.
“Dolby”,  “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. 
“DTS” and “DTS Virtual” are trademarks of Digital Theater Systems, Inc. 

Denon  D-M51DVS  User Guide  Manual  
						

							ENGLISH
54
[1] DSP Surround simulation
BAND
PHONES
VOLUME
ON / STANDBY
DVD SURROUND RECEIVER  ADV-M51
TONE / SDB
FUNCTION MENU / SET+-
SURROUND / SELECTPUSH - PARAM.
2,4,5
1
-
RC-936
A / V
3S TAT U S
RETURN ANGLE AUDIO
SUB TITLE
SETUP TONE / SDBFUNCTION
SURROUND
INPUT MODE
TEST TONE
DVD CH
0/
10CALL
ENTER
MUTING
+
10
DISPLAY MENUTOP MENU
SYSTEM MD
CDR TAPE
TUNER TV / VCR
SURROUND
PARAMETERCH SELECT VIRTUAL
DIRECT STEREO
-+VCR CH
IN /
SURR.
IN /
SURR.DVD
9
8 2
1
\b
6+
-
1
2
5
4
1Select the input source.
FUNCTION
Main unit
FUNCTION
Remote control unit
2Select the surround mode for the input channel.
SURROUND / SELECTPUSH - PARAM.
Main unit
SURROUND
Remote control unit
•The surround mode switches in the following order each
time the SURROUND MODE button is pressed:
DOLBY VS STEREO ROCK ARENADIRECTJAZZ CLUBDOLBY VSVIDEO GAME
3Play a program source.
•Refer to instruction manual for handling.
5Display the parameter you want to adjust.
•Use the cursor buttons (
•, 
\f) to select the surround
parameter.
Remote control unit
• ROOM SIZE setting
MED-SMEDMED-LLARGE
,/
SMALL
•EFFECT LEVEL setting
11015
,/
R.SIZE MED
EFECT10
SURROUND / SELECTPUSH - PARAM.
Main unit
•DEFAULT setting
YESNO
,/
When  “YES” is selected, the settings are reset to their
factory default values.
Stop operating buttons once the surround parameter settings have been completed. After several seconds the normal display
reappears and the settings are automatically set.
Y/N
DEFAULTY/N
Surround parameters (3)
ROOM SIZE: •This sets the size of the sound field.
There are five settings:  “SMALL”, “MED-S” (medium-
small),  “MED”,  “MED-L” (medium-large) and  “LARGE”.
“SMALL” recreates a small sound field, “LARGE” a large
sound field.
EFFECT LEVEL: •This sets the strength of the surround effect.
The level can be set in 15 steps from 1 to 15. Lower the
level if the sound seems distorted.
4To enter the surround parameter
setting mode, press the SURROUND
mode.
• The surround parameter switches
in the following order each time the
SURROUND button is pressed for
the different surround modes.SURROUND
PARAMETER
Remote control unit
ROOM SIZE
EFFECT
DEFAULT
ROCK ARENA
JAZZ CLUB
VIDEO GAME




 





Denon  D-M51DVS  User Guide  Manual  
						

							ENGLISH
55
2Table of Surround Mode Parameters (1)
Presence/absence of signals and controllability in the various modesChannel output
FRONT L/R SUB-WOOFER
Surround Mode
DVS: Dolby Virtual Speaker
DHP: Dolby Headphone
REFERENCE
WIDE
DH1
DH2
DH3
BYPASS
STEREO
DIRECT
ROCK ARENA
JAZZ CLUB
VIDEO GAME C
C
C (H/P ONLY)
C (H/P ONLY)
C (H/P ONLY)
C (H/P ONLY)
C
C
C
C
C B
B
E
E
E
E
B
B
B
B
B
DVS
DHP
2Table of Surround Mode Parameters (2)
Presence/absence of signals and controllability in the various modes
Playback signals and surround modes for the various input functions
(D.AUX / L2)MD/LINE1 TAPE1 / LINE2 /
TUNER
DVD / D.AUX /MD/LINE1
When playing Dolby Digital signals When playing DTS signals
When playing
PCM signals When playing
analog signals When playing
analog signals
2-channel Multi-
channel Multi-channel 2-channel 2-channel 2-channel
Surround Mode
DVS: Dolby Virtual Speaker
DHP: Dolby Headphone
REFERENCE
WIDE
DH1
DH2
DH3
BYPASS
STEREO
DIRECT
ROCK ARENA
JAZZ CLUB
VIDEO GAME 4
PL 
II
4PL II
4PL II
4PL II
4PL II
C
C
C
C
C
C C
C
C
C
C
C D.MIX
C D.MIX
C D.MIX
C
C
C C
4PL 
II4PL II4PL II
C4PL II4PL II4PL II
C4PL II4PL II4PL II
C4PL II4PL II4PL II
C4PL II4PL II4PL II
CD.MIX CCC
C D.MIX CCC
C D.MIX CCC
CCCC
CCCC
CCCC
DVS
DHP
B : Can be either present or absent, depending on speaker configuration sett\
ing.
C : Signal present or controllable. D.MIX : Compatible with down-mixing.
4 : Can be selected with 2-channel decode mode. PL 
II : Compatible with PL IIprocessing.
E : No signal or not controllable.

Denon  D-M51DVS  User Guide  Manual  
						

							ENGLISH
56
2Table of Surround Mode Parameters (3)
Presence/absence of signals and controllability in the various modesSurround parameter – default value indicated in (parentheses)
SDB TONE
CONTROL 2ch
DECODE MODE
Surround Mode
DVS: Dolby Virtual Speaker
DHP: Dolby Headphone
REFERENCE
WIDE
DH1
DH2
DH3
BYPASS
STEREO
DIRECT
ROCK ARENA
JAZZ CLUB
VIDEO GAME C 
(OFF)
C  (OFF)
C  (OFF)
C  (OFF)
C  (OFF)
C  (OFF)
C  (OFF)
E
C  (OFF)
C  (OFF)
C  (OFF) C 
(OFF)
C  (OFF)
C  (OFF)
C  (OFF)
C  (OFF)
C  (OFF) E
C  (OFF)
E
C  (OFF)
C  (OFF)
C  (OFF) C*1
(VIRTUAL1)
C*2
(CINEMA)
E
E
E
E
E
DVS
DHP
2Table of Surround Mode Parameters (4)
Presence/absence of signals and controllability in the various modes
Surround parameter  – default value indicated in (parentheses)
Dolby Digital/DTS signal
ROOM
SIZE EFFECT
LEVEL D. COMP. LFE
Surround Mode
DVS: Dolby Virtual Speaker
DHP: Dolby Headphone
REFERENCE
WIDE
DH1
DH2
DH3
BYPASS
STEREO
DIRECT
ROCK ARENA
JAZZ CLUB
VIDEO GAME E
E
E
E
E
E
E
E
C  (MEDIUM)
C  (MEDIUM)
C  (MEDIUM) E
E
E
E
E
E
E
E
C  (10))
C  (10)
C  (10) C 
(OFF) C (0dB)
C  (OFF) C (0dB)
C  (OFF) C (0dB)
C  (OFF) C (0dB)
C  (OFF) C (0dB)
C  (OFF) C (0dB)
C  (OFF) C (0dB)
C  (OFF) C (0dB)
C  (OFF)
C  (OFF) C (0dB)
C  (OFF) C (0dB)
DVS
DHP
C
: Signal present or controllable.
E : No signal or not controllable.
*1 : 2ch DECODE MODE (VIRTUAL1, VIRTUAL2) selectable.
*2 : 2ch DECODE MODE (Cinema, Music 1 or Music 2 mode) selectable.
(    ): Parameter ’s default value C 
(0dB)

Denon  D-M51DVS  User Guide  Manual  
						

							ENGLISH
57
(3) Playback using the Dolby Headphone mode
•The ADV-M51 is equipped with the Dolby Headphone mode, a technology developed j\
ointly by Dolby Laboratories and Lake Technology for
achieving 3D sound over regular headphones.
• The Dolby Headphone mode is set when headphones are connected to the ADV\
-M51 ’s headphones jack.
• There are actually four Dolby Headphone modes creating different sound f\
ield effects: DH1, DH2, DH3 and Bypass (normal stereo p layback).
• The Dolby Headphone mode is compatible with Dolby Digital and DTS multi-\
channel sources. With 2-channel sources, playback in the Cinema,
Music 1 and Music 2 modes can be selected with the 2-channel mode settin\
g.
BAND
PHONES
VOLUME
ON / STANDBY
DVD SURROUND RECEIVER   ADV-M51
TONE / SDB
FUNCTION MENU / SET+-
SURROUND / SELECTPUSH - PARAM.
2,3
1
RC-936
A / V
3S TAT U S
RETURN ANGLE AUDIO
SUB TITLE
SETUP TONE / SDBFUNCTION
SURROUND
INPUT MODE
TEST TONE
DVD
ENTER
MUTING
DISPLAY MENU
TOP MENU
SYSTEM MD CDR TAPE
TUNER TV / VCR
SURROUND
PARAMETERCH SELECT
-+VCR CH
IN /
SURR.
IN /
SURR.DVD
9
8 2
1
\b
6+
-
3
2
1Connect headphones (sold separately) to the headphones
jack.
• When headphones are plugged in, the output to the
speakers is automatically turned off and no sound is
produced from the speakers.
PHONES
2Press the surround parameter button and display the surround
parameters.
When the function is set to DVD, this is also shown on the
display.
SURROUND / SELECTPUSH - PARAM.
Main unit
SURROUND
PARAMETER
Remote control unit
3Set the various surround parameters.
If nothing is done for 6 seconds from when the parameter
is displayed, the normal display reappears.
SURROUND / SELECTPUSH - PARAM.
Main unitRemote control unit
•Dolby H mode setting
DH2DH3BYPASS
,/
DH1
•2-channel mode setting
• The mode switches as shown below each time a button is
operated.
CINEMA
MUSIC2MUSIC1
Can be selected when there is no signal or when playing a
2-channel source.
There are also the same parameters as those described under
“(2) Playing in the Dolby Virtual Speaker mode”, namely:
BD.COMP. settingBLFE level settingBDEFAULT setting
When the surround parameters are displayed, use the • and \f
cursor buttons on the remote control unit to switch to previous or
following items.
HDH1
2 CINEMA
DownloadedTFromTTheatreSystem-Manual.comTManuals
Denon  D-M51DVS  User Guide  Manual  
						

							ENGLISH
58
Surround parameters (4)
DOLBY H (Dolby Headphone modes)
DH1 ..............Reference room (small room with little reverberation)
DH2 ..............Live room  (room with more reverberation than DH1)
DH3 ..............Large room (Larger room than DH1. Use this mode to achieve a
sense of distance and diffusion of the sound.)
BYPASS ........Stereo playback.
2-channel modes
These can be selected when playing 2-channel sources (analog,
PCM, etc.). The signals are processed by one of the following
decoders to achieve multiple channels then played in the Dolby
Headphone mode.
In the Bypass mode, these are not displayed.
CINEMA  .......Dolby Pro Logic  IICinema mode
MUSIC1  ........Dolby Pro Logic  IIMusic mode
MUSIC2  ........Signals played in the Dolby Headphone mode with 2 channels.
2Recording
When playing digital input sources, including function DVDs, signals
encoded in the Dolby Headphone mode are output from the recording
output terminals and can be recorded on other recording devices.
q Connect headphones to the headphones jack.
w Signals encoded in the Dolby Headphone mode are output from
the recording output terminals (in analog).
e Select the parameters, set the desired mode and start recording.
NOTES:
• Dolby Headphone processing makes the analog recording output
level lower than the normal stereo recording output level.
• Do not change the parameters or unplug the headphones during
recording. Doing so will cause interruptions in the recorded sound.
• Dolby Headphone signals cannot be recorded during playback of
analog sources. The analog input signals are output as such from
the recording output terminals.

Denon  D-M51DVS  User Guide  Manual  
						

							59
ENGLISH
15LISTENING TO THE RADIO
1Press the FUNCTION button and select “TUNER”.
2
Select “FM” or “AM”.
• The selected “FM AUTO”, “FM MONO” or “AM” isdisplayed. 
• When using the remote control, the mode button is used to select FM AUTO and MONO. 
3Adjust the receiving frequency. 
• When a station is received, the “TUNED” indication willlight. 
NOTE:
A humming sound may be heard when using a TV nearby while
receiving AM programs. If this happens, move the system as far
from the TV as possible.
Auto tuning
• When one of the Tuning +/– button is pressed, the frequencychanges in steps of 0.2 MHz in the FM band, 10 kHz in the AM
band.
• If one of the Tuning +/– button is held for over 1 second, the frequency continues to change when the button is released
(auto tuning) and stops when a station is tuned in.Tuning will not
stop at stations whose reception is poor.
• To stop the auto tuning function, press the Tuning +/– button once.
FM Stereo Reception
• When a program being broadcast in “FM AUTO” is received,the “ST” indicator lights and the program is received in stereo.
• If reception is poor and there is much noise in the stereo signals, press the BAND or MODE button to set the FM MONO mode.
(1) Tuning
Example:  Tuning in FM/AM stations
BAND
PHONES
VOLUME
ON / STANDBY
DVD SURROUND RECEIVER   ADV-M51
TONE / SDB
FUNCTION MENU / SET+-
SURROUND / SELECTPUSH - PA R A M .
123
FUNCTIONFUNCTION
Main unit Remote control unit
BANDRANDOM
BAND
Main unit Remote control unit
+
-
+
-
A / V
3
A-B REPEAT
SEARCH MODE
ON
OFF
REPEAT RANDOM
CLEAR ZOOM
SLIDE MODE
PROG/ DIRECT MEMO BAND
MODE
S TAT U S FUNCTION
SURROUND
INPUT MODE
TEST TONE
DVD TUNER
CH
3
-+
21654
987
0
/ 10CALL
MUTING
+
10
SYSTEM MD
CDR TAPE
TUNER TV / VCR
VCR
NTSC/PAL
SLEEP
ENTER
CD SRS
EDIT
/
MENU
CHARAC.
REC
TIME
TITLE
TUNING /TV VOL
TV CH TV CH
TUNER
DVD
MD / LINE-1 TAPE / LINE-2
AUTO DECODE
VIRTUAL
DIRECT 5CH STEREO
STEREO D.AUXIN
/
SURR.
IN /
SURR.DVD
T     V
T V  INSOURCE
9
8 2
1
7
\b
+
-
2 
3 
12 
+-+
-
TUNING /
Main unit
Remote control unit
A / V
SYSTEM MD
CDR TAPE
TUNER
TV / VCR
IN/
SURR.
IN /
SURR.DVD
Set the remote
control selector
switches to A/V
and TUNER.
PROG/ DIRECT
MODE
About the tuning mode and the preset mode
• The function of the “–” and “+” buttonson the main unit can be switched so that
they can be used for either tuning
(selecting the reception frequency) or for
selecting preset stations.
• The buttons are set to the tuning mode upon shipment. The mode can be switched
to the preset mode by pressing the “+”
button while pressing in the BAND button.
(When this is done, “PRESET” is flashes for
approximately 5 seconds.)
• Press the “–” button while pressing in the BAND button to switch to the tuning mode. (When this is done, “TUNING” is
flashes for approximately 5 seconds.)
+-
Main unit
BAND
Main unit

Denon  D-M51DVS  User Guide  Manual  
						

							60
ENGLISH
(2) Presetting stations that have been tuned in and giving names to stations\
 (remote control unitonly)
2A total of 40 stations (including both FM and AM stations) can be pres\
et.
2 Preset stations can be given names with up to 8 characters (letters, nu\
mbers and symbols).
2 Preset stations using the including remote control unit.
1
Tune in the station you want to preset.
P0- FM 9\b.50M
+
-
+
-
A/V
A-B REPEAT
SEARCH MODE
REPEAT RANDOM
CLEAR ZOOM
SLIDE MODE
PROG/ DIRECT MEMO BAND
MODE
FUNCTION
SURROUND
INPUT MODE
TEST TONE TUNER
CH
3
-+
21654
987
0
/ 10CALL+
10
TUNER TV / VCR
NTSC/PAL
SLEEP
ENTER
CD SRS
EDIT
/
MENU
CHARAC.
REC
TIME
TITLE
TUNING /T V VOL
TV CH TV CH
TUNER
DVD
MD / LINE-1 TAPE / LINE-2
AUTO DECODE
VIRTUAL
DIRECT 5CH STEREO
STEREO D.AUXIN
/
SURRDVD
T     V
T V  IN
SOURCE
2,3,
4,6
3,5
2Press the MEMO button twice in a row.
• The name input mode is set.
REPEAT
MEMO
Remote control unit
P0-_
3Use the “+” and “–” preset buttons to select the characte\
r,
then press the MEMO button to input that character.
+
-
TUNER
CH
Remote control unit
• When the “+” TUNING button or the MEMO button ispressed, the selected character is entered, the cursor
moves to the next position and the next character can be
input.
• Use the “–” TUNING button to move back to the previous position. Use this to correct characters that have already
been input.
P0-F
\
P0- F_
REPEAT
MEMO
Remote control unit
4Press the MEMO button twice in a row to enter the station
name you have input.
• The preset number indicator, “P”, flashes.
REPEAT
MEMO
Remote control unit
P0- FM-\fENON
5Use the “+” and “–” preset buttons to
select the preset number.
6Press the MEMO button to enter the preset number.
• The preset number, band and reception frequency are displayed, then the station name appears.
+
-
TUNER
CH
Remote control unit
P03 FM-\fENON
The preset number can also be input directly using the +10and 1 to 10 buttons on the numeric keypad.
P03 FM 9\b.50M
\
P03 FM-\fENON
REPEAT
MEMO
Remote control unit
To stop in the middle of the procedure,press the MODE button before pressing
the MEMO button at step  4. Everything
you have input is cleared.
To clear a station name that has been set in
the memory, call out that station, set the
name input mode in step  2, then press the
MODE button. The station name is cleared
and the preset channel frequency is
displayed.
If you only want to preset a station, press the MEMO button once
while the station is tuned in. The preset number indicator, “P”,
flashes, and the preset number input mode is set. Use the “+” and
“–” preset buttons to select the preset number then press the
MEMO button again to store that station at the selected number.
(The number can also be specified directly using the +10 and 1 to
10 buttons on the numeric keypad.)
+
-
TUNER
CHREPEATMEMO
Remote control unit Remote control unit
PROG/ DIRECT
MODE
Remote control unit
A / V
SYSTEM MD CDR TAPE
TUNER
TV / VCR
IN/
SURR.
IN /
SURR.DVD
Set the remote
control selector
switches to A/V
and TUNER.

Denon  D-M51DVS  User Guide  Manual