Dell U3011 Users Guide

 
Universal Serial Bus (USB) Interface  
USB Upstream  C onnector  
   
USB Downstream  C onnector  
   
USB  P orts    
l 1 upstream  -  back   
l 4 downstream  -  2 on back; 2 on  left  side   
Plug and Play Capability  
You can install the monitor in any Plug and Play - compatible system. The monitor automatically provides the computer system with its Extended Display Pin Number 3 - pin Side of the C onnected  Signal Cable 
(Cable not included)
1 Y (Luminance signal)
2 Pb (Color differential signal)
3...

Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor 
installations are automatic; you can select different settings if desired. For more information about changing the monitor settings, see  Operating the Monitor .  
Card Reader Specifications  
Overview  
l The Flash Memory Card Reader is a USB storage device that allows users to read and write information from and into the memory card.   
    
l The...

For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor:  
l To clean your antistatic screen, lightly dampen a soft, clean cloth with water. If possible, use a special screen - cleaning tissue or solution suitable for the 
antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.   
l Use a lightly - dampened, warm cloth to clean the monitor. Avoid using detergent of any kind as some detergents leave a milky...

Back to Contents Page    
 
Appendix   
 
   Safety Instructions  
   FCC Notice (U.S. Only) and Other Regulatory Information   
   Contacting Dell  
 
WARNING: Safety Instructions  
For information on safety instructions, see the  Product Information Guide .   
FCC Notices (U.S. Only) and Other Regulatory Information  
For FCC notices and other regulatory information, see the regulatory compliance website located at  www.dell.com
egulatory_compliance .  
Contacting Dell  
For customers in the United...

Back to Contents Page    
Setting Up Your Monitor   
 
 
1. Go to  http://support.dell.com ,  enter your service tag, and download the latest driver for your graphics card.   
2. After installing the drivers for your Graphics Adapter, attempt to set the resolution to 2048 x 1280 (VGA input source) /  2560 x 1600 (DVI/DisplayPort input 
sources) / 1920 x 1200 (HDMI input source)  again .  
Back to Contents Page  NOTE:  If you are unable to set the resolution to 2048 x 1280 (VGA input source) /  2560 x...

Back to Contents Page    
Setting Up Your Monitor   
 
 
In Windows XP:  
1. Right - click on the desktop and click  Properties .  
2. Select the  Settings  tab.  
3. Select  Advanced .  
4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).   
5. Refer to the graphic card provider website for updated driver (for example,  http://www.ATI.com  OR  http://www.NVIDIA.com  ).  
6. After installing the drivers for your Graphics Adapter,...

Back to Contents Page    
 
Operating the Monitor   
   
 
   Using the Front Panel Controls  
   Using the On - Screen Display (OSD) Menu  
   Setting the Maximum Resolution  
   Using the Dell Soundbar (Optional)  
   Using the Tilt, Swivel, and Vertical Extension  
Using the Front Panel  Controls  
Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls, 
an OSD shows the numeric values of the...

Using the On - Screen Display (OSD) Menu  
 
Accessing the Menu System  
1.  Touch  the   button to launch the OSD menu and display the main menu.   
Main Menu for analog (VGA) Input  
 
2.   Touch  the   or   button to move between the setting options. As you move from one icon to another, the option name is highlighted. See the 
following table for a complete list of all the options available for the monitor.    
3.   Touch the   button once to activate the highlighted option.   
4.   Touch the   or...

 
   
    Brightness / Contrast   Use  this  menu to activate Brightness/Contrast adjustment.  
 
 
Brightness   Brightness adjusts the luminance of the backlight.   
Touch the    button to increase brightness and touch the    button to decrease brightness (min 0 ~ max 100).   
Contrast Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary.  
Touch the    button to increase contrast and touch the    button to decrease contrast (min 0 ~ max 100).   
The Contrast...

HDMI
Select  HDMI input  when you are using the HDMI connector. Touch the   button to select the HDMI input source.
Component
Select  Component  input  when you are using the Component connector. Touch the   button to select the Component input 
source.
 
    Color Setting s  
Use the  Color Settings  to adjust the color setting mode and color temperature.  
Color Settings submenu for Standard, Warm, Cool, Adobe RGB, sRGB, xv Mode and Custom Color modes:   
 
Color Settings submenu for Multimedia, Game...