Dell U3011 Users Guide

3011  Flat Panel Monitor Users Guide  
Notes,  Caution s, and  Warning s  
 
Information in this document is subject to change without notice.  
   
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.  
Trademarks used in this text:  Dell  and the  DELL  logo are trademarks of Dell Inc;   Microsoft  and  Windows  are either trademarks or registered trademarks of Microsoft Corporation in 
the United States and/or other countries ,...

Back to Contents Page    
   
About Your Monitor   
 
Package Contents    
Your monitor ships with the components shown below. Ensure that you have received all the components and  contact Dell  if something is missing.  
    Package Contents
Product Features
Identifying Parts and Controls
Monitor Specifications
Universal Serial Bus (USB) Interface
Plug and Play Capability
Card Reader Specifications
LCD Monitor Quality and Pixel Policy
Maintenance Guidelines
  NOTE:  Some items may be optional and may...

 
Product Features  
The  U3011  flat panel display has an active matrix, thin - film transistor (TFT), liquid crystal display (LCD). The monitor features include:   
■  756.23 mm (30 inches) viewable area display (measured diagonally).   
■   2560 x 1600 resolution, plus full - screen support for lower resolutions.  
■  Wide viewing angle (178°/178°yfDQGVXSHUEJUD\VFDOHWUDFNLQJPLQLPL]HVFRORUGHYLDWLRQVDWELDVHGDQJOHVRIYLHZLQJVLWWLQJVWDQGLQJRUPRYLQJVLGe -   to -
side) which ensures ultra...

Back View  
Side View  3   Shortcut Key 3  -  Input Source (Default)
4   Menu
5   Exit
6   Power (with power light indicator)
NOTE:  1~5 are capacitive touch sensor keys, which are activated by placing your finger on the blue LED.
 
Back view Back view with monitor stand
Label Description Use
1 VESA mounting holes   (100 mm x 100 
mm  -  behind attached  VESA Plate ) Wall mount monitor using VESA - compatible wall mount 
kit (100 mm x 100 mm).
2  Security lock slot To help secure your monitor.
3 Barcode...

Bottom View    
   
Monitor Specifications  
Flat Panel Specifications  
    
Bottom view Bottom view with monitor stand
Label Description   Use  
1 AC power cord connector Connect the power cable .
2 DC power  connector  for Dell Soundbar Connect the power cord for the soundbar (optional) .
3 Audio connectors Connect the HDMI 2.0 channel or DisplayPort 2.0 channel or 5.1 channel 
audio output devices.   
Connect the front left/right channel output to the green connector.  Use this 
connector for 2.0/2.1...

*U3011 color gamut (typical) is based on CIE1976 ( 117% ) and CIE1931 (102%) test standards.   
Resolution  Specifications  
 
Analog signal input  
Digital signal Input (DVI dual link and DisplayPort and HDMI)  
Supported Video Modes  
Preset Display Modes  
Electrical  Specifications  Color depth 1.07 billion colors
Color Gamut 117%*  NTSC typical  / 100% sRGB, 99% Adobe RGB
Horizontal scan range 30 kHz to 99 kHz 
Vertical scan range 56 Hz to 86 Hz
Optimal preset resolution 2048 x 1280 at 60 Hz
Highest...

Physical  Characteristics  
Environmental  Characteristics  sync(H+V) 0.3 volt, 75 ohm input impedance  
Synchronization input signals Separate horizontal and vertical synchronizations, 
polarity - free TTL level, SOG (Composite SYNC on 
green)
AC input voltage/frequency/current 100 to 240 VAC / 50 Hz/60 Hz +/ -  3 Hz / 2.5 A 
(Max.)
Inrush current 120 V: 42 A (Max.) at 0  o
C  
220 V: 80 A (Max.) at 0  o
C
Connector type 15 - pin D - subminiature, blue connector; DVI - D, 
white connector;...

Power Management Modes  
If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in 
use. This is referred to as  Power Save Mode *. If the computer detects input from keyboard, mouse, or other input devices, the monitor automatically resumes 
functioning. The following table shows the power consumption and signaling of this automatic power saving feature:   
The OSD will only function in the normal...

 
 
20 -  
 
  12 DDC - SDA
13 H - sync
14 V - sync
15 DDC - SCL
NOTE:  Pin 1 is at the top left.
Pin Number 24 - pin Side of the Connected Signal Cable
1 T.M.D.S. Data 2 -
2 T.M.D.S. Data 2+
3 T.M.D.S. Data 2/4 Shield
4 T.M.D.S. Data 4 -
5 NT.M.D.S. Data 4+
6 DDC Clock
7 DDC Data
8 No Connect
9 T.M.D.S. Data 1 -
10 T.M.D.S. Data 1+
11 T.M.D.S. Data 1/3 Shield
12 T.M.D.S. Data 3 -
13 T.M.D.S. Data 3+
14 +5V Power
15 Self Test
16 Hot Plug Detect
17 T.M.D.S. Data 0 -
18 T.M.D.S. Data 0+
19 T.M.D.S. Data...

19 -  
 
 
Component Video Connector  5   GND
6   ML1(n)
7   ML2(p)
8   GND
9   ML2(n)
10   ML3(p)
11   GND
12   ML3(n)
13   GND
14   GND 
15   AUX(p)
16   GND
17   AUX(n)
18   HPD
19  
DP_PWR Return
20  
+3.3V DP_PWR
Pin Number 19 - pin Side of the Connected Signal Cable  
(Cable not included)
1 TMDS DATA 2+
2 TMDS DATA 2 SHIELD
3 TMDS DATA 2 -
4 TMDS DATA 1+  
5 TMDS DATA 1 SHIELD
6 TMDS DATA 1 -
7 TMDS DATA 0+
8 TMDS DATA 0 SHIELD
9 TMDS DATA 0 -
10 TMDS CLOCK
11 TMDS CLOCK SHIELD
12 TMDS CLOCK -  
13...