Dell U2711 Users Guide

							   
Universal Serial Bus (USB) Interface  Width   646.71 mm (25.46 inches)
Depth   199.95 mm (7.87 inches)
Dimensions (without stand)  
Height  
385.67 mm (15.18 inches) 
Width   646.71 mm (25.46 inches)
Depth   93 mm (3.66 inches)
Stand Dimensions     
Height (Compressed)   354.5 mm (13.96 inches)
Height (Extended)   394 mm (15.51 inches)
Width   320 mm (12.60 inches)
Depth   199.95 mm (7.87 inches)
   
Weight with packaging   14.46 kg (31.88 lb)
Weight with stand assembly and 
cables   10.46 kg (23.06 lb)
Weight without stand assembly  
 (For wall mount or VESA mount 
considerations  -  no cables)   7.72 kg (17.02 lb)
Weight of stand assembly     2.63 kg (5.80 lb) 
Environmental  
The following table lists the environmental limitation:   
Temperature      
Operating   0° to 40°C (32° to 104°Fyf  
Nonoperating   Storage:  - 20° to 60°C ( - 4° to 140°Fyf  
Shipping:  - 20° to 60°C( - 4° to 140°Fyf  
Humidity      
Operating   10% to 80% (noncondensing)  
Nonoperating   Storage: 5% to 90% (noncondensing)  
Shipping: 5% to 90%(noncondensing)  
Altitude      
Operating   4,485 m max
Nonoperating   12,191.41 m max
Thermal dissipation   471 BTU/hour (maximum)  
385 BTU/hour (typical) 
This monitor supports High - Speed Certified USB 2.0 interface.  
						

							USB Upstream Connector  
   
  
USB Downstream Connector  
   
  
USB Ports  
l 1 upstream  -  rear   
l 4 downstream  -  2 on rear; 2 on left  side  
Card Reader Specifications  
Overview  
l The Flash Memory Card Reader is a USB storage device that allows users to read and write information from and into the memory card.   
    
l The Flash Memory Card Reader is automatically recognized by Microsoft ®  Windows ®  2000, Windows ®  XP, Windows Vista ®  and Widows ®  7.   
    
l Once installed and recognized, each separate memory card (slot) appears as a separate drive/drive letter.   
    
l All standard file operations (copy, delete, drag - and - drop, etc.) can be performed with this drive.   
Features  
The Flash Memory Card Reader has the following features:  
l Supports Microsoft ®  Windows ®  2000, Windows ®  XP, Windows Vista ®  and Widows ®  7  operating systems  
    
l Mass Storage Class device (No drivers are required under Microsoft ®  Windows ®  2000, Windows ®  XP, Windows Vista ®  and Widows ®  7 ).   
    Transfer speed   Data Rate   Power 
Consumption
High speed  480 Mbps  2.5W (Max., each portyf
Full speed  12 Mbps  2.5W (Max., each portyf
Low speed  1.5 Mbps  2.5W (Max., each portyf
Pin Number 4 - pin Side of the connector
1 DMU
2 VCC
3 DPU
4 GND
Pin Number 4 - Pin Side of the Signal Cable
1 VCC
2 DMD
3 DPD
4 GND
NOTE:  The monitors 2.0 USB interface functions only if the computer is USB 2.0 compatible.   
NOTE:  The monitors USB interface works only when the monitor is on or in power save mode. If you switch 
the monitor off and then switch it on, the attached peripherals may take a few seconds to resume normal 
functionality.     
						

							    
l USB - IF certification   
    
l Supports various memory card media   
 
 
   
The following table lists the memory cards supported:  
Maximum Card Capacity Supported by the U2711 card reader  
   
General   
Performance    
Plug and Play Capability  
You can install the monitor in any Plug and Play - compatible system. The monitor automatically provides the computer system with its Extended Display 
Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. If required, the 
user can select different settings, but in most cases monitor installation is automatic.  
Maintenance Guidelines  
Caring for Your Monitor  NOTE:  No Microsoft ®  Windows ®  9X support from Dell.   
Slot Number   Flash memory cards type  
1  
xD - Picture Card  
Memory Stick Card (MS )/ High Speed Memory Stick (HSMS)/Memory Stick Pro Card (MS 
PRO)/ Memory Stick Duo (with Adapter)  
Secure Digital Card (SD)/ Mini Secure Digital (with Adapter)/TransFlash Card  (with 
Adapter)  
MultiMedia Card (MMC)/Reduced Size MultiMedia  Card  ( with Adapter)  
Card type  Support Specification  Memory Card 
Spec Version  Support Maximum 
Capacity by Spec  USB2602 - NU - 05  
 
U2711) 
MS   Memory Stick Standard Format Specification 1.43 128MB Supported
MSPRO Memory Stick Pro Standard Format Specifications 1.02 32GB Supported
MSDuo Memory Stick Duo Standard Format Specifications 1.10 128MB/32GB Supported
MSDuo - HG Memory Stick Duo Standard Format Specifications 1.01 32GB Supported
xD   xD Picture Card Specification  1.2  2GB  Supported
SD SD Memory Card Specifications  2.0  32GB  Supported
MMC MultiMedia Card System Specification  4.2  32GB  Supported
NOTE:  MSPRO includes MSPRO Duo and MS Micro.   
NOTE:  xD includes TypeM and TypeH.  
NOTE:  SD includes HS - SD, MiniSD and SD Micro. SD v2.0 spec includes SDHC.  
NOTE:  MMC includes MMCPlus, RS - MMC, MMC Mobile and MMC micro.   
Connection type USB 2.0 High Speed Device (USB Full Speed Device compatible)
Supported OS Microsoft ®  Windows ®  2000, Windows ®  XP, Windows Vista ®   and Windows ®  7
Transfer Speed
Read: 480 Mb/s (max.)
  Write: 480 Mb/s (max.)  
						

							Fo r best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor:  
l To clean your antistatic screen, lightly dampen a soft, clean cloth with water. If possible, use a special screen - cleaning tissue or solution suitable for the 
antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.   
l Use a lightly - dampened, warm cloth to clean the plastics. Avoid using detergent of any kind as some detergents leave a milky film on the plastics.    
l Handle your  monitor with care as dark - colored monitors may scratch and show white scuff marks more than lighter - colored monitors.    
Back to Contents Page  
      CAUTION:  Read and follow the  Safety Instructions  before cleaning the monitor.   
  CAUTION:  Before cleaning the monitor, unplug the monitor from the electrical 
outlet.    
						

							Back to Contents Page    
 
Appendix  
 
   Safety Instructions  
   FCC Notice (U.S. Only) and Other Regulatory Information  
   Contacting Dell  
   
CAUTION: Safety Instructions  
For information on safety instructions, see the  Safety Information .  
FCC Notice (U.S. Only) and Other Regulatory Information  
For FCC notices and other regulatory information, see the regulatory compliance website located at  www.dell.com
egulatory_compliance .  
Contacting Dell  
      To contact Dell electronically, you can access the following websites and by phone: 
l For support through the web, go to  support.dell.com .   
l For customers in the United States, call 800 - WWW - DELL (800 - 999 - 3355).   
Dell provides several online and telephone - based support and service options. Availability varies by country and product, and some services may not be 
available in your area. To contact Dell for sales, technical support, or customer service issues:  
1. Visit  support.dell.com .   
2. Verify your country or region in the  Choose A Country/Region  drop - down menu at the bottom of the page.   
3. Click  Contact Us  on the left side of the page.   
4. Select the appropriate service or support link based on your need.   
5. Choose the method of contacting Dell that is convenient for you.   
Back to Contents Page  
     CAUTION:  Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, 
electrical hazards, and/or mechanical hazards. 
  NOTE:  If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product 
catalog.    
						

							Back to Contents Page    
 
Setting Up Your Monitor   
 
 
1. Go to  http://support.dell.com ,  enter your service tag, and download the latest driver for your graphics card.  
2. After installing the drivers for your Graphics Adapter, attempt to set the resolution to   2048x1152/2560x1440  again.  
   
Back to Contents Page  NOTE:  If you are unable to set the resolution to 2048x1152/2560x1440 ,  please contact Dell™ to inquire about a Graphics Adapter that supports these 
resolutions.    
						

							Back to Contents Page    
Setting Up Your Monitor   
 
 
In Windows XP:  
1. Right - click on the desktop and click  Properties .  
2. Select the  Settings  tab.  
3. Select  Advanced .  
4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).   
5. Please refer to the graphics card provider website for updated driver (for example,  http://www.ATI.com  OR  http://www.NVIDIA.com  ).  
6. After installing the drivers for your Graphics Adapter, attempt to set the resolution to   2048x1152/2560x1440   again.  
In Windows Vista ®  or Windows 7:  
1. Right - click on the desktop and click  Personalization .  
2. Click  Change Display Settings .  
3. Click  Advanced Settings .  
4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).   
5. Please refer to the graphics card provider website for updated driver (for example,  http://www.ATI.com  OR  http://www.NVIDIA.com  ).  
6. After installing the drivers for your Graphics Adapter, attempt to set the resolution to   2048x1152/2560x1440   again.  
   
Back to Contents Page  NOTE:  If you are unable to set the resolution to 2048x1152/2560x1440 , please contact the manufacturer of your computer or consider purchasing a 
graphics adapter that will support the video resolution of 2048x1152/2560x1440 .     
						

							Back to Contents Page    
Operating the Monitor   
 
   Using the Front Panel Controls  
   Using the On - Scree Display (OSD) Menu  
   Setting the Maximum Resolution  
   Using the Dell Soundbar (Optional)  
   Using the Tilt, Swivel and Vertical Extension  
   
Using the Front Panel  
Use the buttons on the front of the monitor to adjust the image settings.   
NOTE:  1~5 are capacitive touch sensor keys, which are activated by placing your finger on the blue LED.    
      
1 - 3 Shortcut keys   Use this key for direct access to the control menu that you define in the personalize menu. 
*The default settings are Preset Modes Select, Brightness/Contrast Select and Input Source Select.     
1
 
Preset Modes Select   Use this button for different displays modes on your monitor. 
2
 
Brightness/Contrast   Use this button for direct access to the Brightness/Contrast control menu.
3
 
Input Source Select   Use Input Source Select button to select between different video signals that may be connected to your monitor. 
l VGA input   
l DVI - D 1 input   
l DVI - D 2 input   
l DisplayPort input    
l HDMI input    
l Component video input    
l Composite video input   
 
Displays the source selection bar. Touch  and   buttons   to move between the setting options  and touch    to select the input source 
you want.    
						

							     
If either VGA or DVI - D input is selected and both VGA and DVI - D cables are not connected, a floating dialog box as shown below appears. 
    
If either Composite, or Component input is selected and the cables are not connected or the video source is turned off, the screen does 
not have an image. If any button is touched (except power button), the monitor displays the following message:  
     or
or  
4
 
OSD Menu   Use this key to open the on - screen display (OSD). See  Using the OSD Menu .
5
   
Exit   Use this key to exit the OSD menu.
6
 
Power button  
indicator)   Use the power button to turn the monitor on and off. 
The blue light indicates the monitor is on and fully functional. An amber light indicates power save mode.    
						

							   
Using the OSD Menu  
1. Touch   to launch the OSD menu and display the main menu.   
Main Menu for Analog (VGA) Input  
 
Or  
Main Menu for non Analog (non VGA) Input  NOTE:  If you change the settings and then either proceed to another menu, or exit the OSD menu, the monitor 
automatically saves the changes. The changes are also saved if you change the settings and then wait for the 
OSD menu to disappear.