Dell U2711 Users Guide

 
2. Touch the   and   buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the table for 
a complete list of all the options available for the monitor.   
3. Touch the   button once to activate the highlighted option.    
4. Touch  and   button to select the desired parameter.   
5.  Touch    to enter the slide bar and then use the    and   buttons, according to the indicators on the menu, to make your changes.   
6.  Touch   return to...

   
   
   
   
   
   
   
    
Brightness  
Contrast  
Back   Brightness adjusts the luminance of the backlight.   
Touch the   button to increase brightness and touch the   button to decrease brightness (min 0 ~ max 100).   
Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary.  
Touch the   button to increase contrast and touch the   button to decrease contrast (min 0 ~ max 100).   
The Contrast function adjusts the degree of difference between the darkest and...

 
 
 
 
 
    
Scan Sources  
VGA  
DVI - D 1 & 2
DisplayPort
HDMI
Component
Composite
Back Scan for Sources.  Touch   to scan for available input signals.
Select VGA input when you are using the analog (VGA) connector. Touch   to select the VGA input source.
Select DVI - D input when you are using the Digital (DVI) connector. Touch   to select the DVI input source.
Select DisplayPort input when you are using DisplayPort connector. Touch   to select the DisplayPort input source. 
Select HDMI input when...

 
  
   
    Input Color Format  
Gamma  
Mode Selection  
Preset modes  
Graphics Format
Standard  
Multimedia 
Game  
Warm  
Cool 
Adobe RGB  
sRGB  NOTE:  Image modes are different between the VGA/DVI - D and Video inputs
Allows you to set the color format to:  
PC RGB - Suitable for normal PC graphics display over DVI  
HD YPbPr - Suitable for HD video playback over DVI.    
Allows you to set the color mode to PC or Mac.
Allows you to set the display mode to Graphics or Video. If your computer is...

    Custom color  
Video Format
Movie
Game
Nature
xv Mode  
Custom color  
Hue  
Saturation  
Reset Color Settings  
Back   Use the  or   button select Gain.  
l Gain: Select it to adjust input RGB signal gain level.   
6 axis adjustment can only be chosen by video mode.  
Mode suitable for movie playback. 
Mode suitable for game applications. 
Mode suitable for nature scenes. 
Suitable for xvYCC compliance source.
Use the  or   button select Gain, Offset, Hue and Saturation. 
l Gain: Select it to adjust...

   
 
      
  
    
   
   Display Settings  
 
Wide Mode 
Horizontal Position  
Vertical Position  
Sharpness  
Noise reduction  
Pixel Clock  
Phase  
Dynamic Contrast  
Display Info 
Reset Display  Setting  
Back  
   Adjusts the image ratio as 4:3 or full screen.  
   
NOTE:  Wide Mode adjustment is not required at maximum preset resolution 2560 x 1440.    
Use  the  and  buttons to adjust image left and right. Minimum is 0 ( - ). Maximum is 100 (+).  
Use  the  and    buttons to adjust image up and...

 
 
      
Line Out Source
Audio Configuration
Reset Audio Setting s
Back Select the source of the audio input. (HDMI/DisplayPort)
Switches between 2.0 and 5.1 audio output.  
NOTE:  5.1 channel Dolby or DTS on the player is not available through DP or HDMI, there will be a warning message;  “ Unsupported 5.1 channel audio format. Please set the audio output on your audio player to Pulse
(PCM) if available. ”    
Resets your monitor audio settings to the factory defaults.
Touch  to go back to the main...

       
      
  
Mode  
When PBP activated
PBP Source     PBP submenu when PBP ON
   
NOTE:  When using DVI source, the contrast adjustment is not available.
Use   and   to browse and   to select  Off  or  On .  
 
Select an input signal for PBP (HDMI/Component/Composite).
Adjust the contrast level of the picture in PBP Mode.    

PBP Contrast  
Back   reduces the contrast  
increases the contrast   
Touch     to go back to the main menu. 
 
  
    
    Other Settings   
 
Language 
Menu Transparency 
Menu Timer 
Menu Lock 
Button Sound  
Power Save Audio
DDC/CI    
Language option to set the OSD display to one of eight  languages (English, Espanol, Francais, Deutsch, Japanese, Simplified Chinese, Russian and Brazil 
Portuguese ).
Allows you to adjust the OSD background from opaque to transparent. 
OSD Hold Time: Sets the length...

   
    LCD Conditioning  
Factory Reset  
Back         
If an image appears to be stuck on the monitor, select  LCD Conditioning  to help eliminate any image retention. Using the LCD Conditioning feature may take 
several hours. Severe cases of image retention are known as burn - in, the LCD Conditioning feature does not remove burn - in. 
 
 
Reset all OSD settings to the factory preset values.
Touch     to go back to the main menu. 
  Personalize   There are three shortcut keys on the front panel....