Dell St2010 Users Guide

Tilt  
With the built - in pedestal, you can tilt the monitor for the most comfortable viewing angle.  
      
   
Back to Contents Page    NOTE:  The stand is detached and extended when the monitor is shipped from the factory.  

Back to Contents Page   
Setting Up Your Monitor   
 
- BLK Flat Panel Monitor   
Setting the display resolution to 1600x900 (maximum )  
For optimal display performance while using the Microsoft Windows operating systems, set the display resolution to 1600x 9000 pixels by performing the 
following steps:  
1. Right - click on the desktop and click  Properties .  
2. Select the  Settings  tab.  
3. Move the slider - bar to the right by pressing and holding left - mouse button and adjust the screen...

ST2010 - BLK  
Information in this document is subject to change without notice.  
2009  
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.  
Trademarks used in this text:  Dell  and the  DELL  logo are trademarks of Dell Inc;   Microsoft and Windows  are either trademarks or registered trademarks of 
Microsoft Corporation in the United States and/or other countries.  ENERGY STAR  is a registered trademark of the U.S. Environmental...

Back to Contents Page    
 
Setting Up the Monitor   
- BLK Flat Panel Monitor Users Guide  
   Attaching the Base  
   Connecting the Monitor  
   Attaching the Soundbar (optional)  
   Removing the Stand    
Attaching the Base  
 
   
Connecting Your Monitor  
   
Connecting the blue VGA cable  
 NOTE:  The base is detached when the monitor is shipped from the factory.
After placing the monitor panel on soft cloth or cushion, complete the following steps to attach the base.
1. Place the monitor on a...

To connect your monitor to the computer:  
1. Turn off your computer and disconnect the power cable.   
2. Connect the blue (analog VGAyfGLVSOD\FRQQHFWRUFDEOHWRWKHFRUUHVSRQGLQJYLGHRSRUWRQWKHEDFNRI\RXUFRPSXWHU   
3. Turn on your monitor and computer.  If your monitor displays an image, installation is complete. If it does not display an image, see  Troubleshooting your 
monitor .    
Attaching the Soundbar    
 
   
Removing the Base   
 
   
   
Back to Contents Page  
    NOTICE:  Do not...

Back to Contents Page    
 
Troubleshooting  
 
- BLK Flat Panel Monitor   
   Self - Test  
   Built - in Diagnostics  
   Common Problems  
   Product Specific Problems  
   Dell Soundbar Problems  
Self - Test  
Your monitor provides a self - test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly 
connected but the monitor screen remains dark, run the monitor self - test by performing the following steps:   
1. Turn off both your...

7. Repeat steps 5 and 6 to inspect the display in green, blue, and white colored screens.   
The test is complete when the white screen appears. To exit, press the  fourth  button again.    
If you do not detect any screen abnormalities upon using the built - in diagnostic tool, the monitor is functioning properly. Check the video card and computer.  
Common Problems  
The following table contains general information about common monitor problems you might encounter and the possible solutions.   
Common...

   
Product Specific Problems  
   
   
 Problems  
Back to Contents Page  Image retention from a static 
image left on the monitor for a 
long period of time Faint shadow from the static 
image displayed appears on 
the screen l Use the Power Management feature to turn off the monitor at all times when not in use  
(for more information, see  Power Management Modes ).  
l Alternatively, use a dynamically changing screensaver.    
Specific Symptoms What You Experience Possible Solutions
Screen image is...