Dell Sp2309w Users Guide

							 
Notes, Notices, and Cautions  
Information in this document is subject to change without notice.  
2008 -  
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.   is strictly forbidden.  
Trademarks used in this text:  DELL and  the  DELL  logo are trademarks of Dell Inc;   Microsoft, Windows,   and  Windows Vista  are either registered trademarks or trademarks of 
Microsoft Corporation in the United States and/or other countries.  
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any 
proprietary interest in trademarks and trade names other than its own.  
Model SP2309Wc   
 
   
   About Your Monitor  
Setting Up the Monitor  
Operating the Monitor  
Troubleshooting   
Appendix  
 
NOTE:  A NOTE indicates important information that helps you make better use of your computer.
NOTICE:  A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
  CAUTION:  A CAUTION indicates a potential for property damage, personal injury, or death.  
						

							   
Back to Contents Page    
About Your Monitor   
SP2309W  Flat Panel Monitor Users Guide  
Package Contents  
Your monitor comes with all the items shown below. Ensure that you have all the items. If something is missing,  contact Dell .   
    Package Contents
Product Features
Identifying Parts and Controls
Monitor Specifications
Universal Serial Bus (USB) Interface
Plug and Play Capability
Camera  -  MIC Specifications
Maintenance Guidelines
NOTE:  Some items may be optional and may not ship with your monitor. Some features or media may not be available in 
certain countries.
 
    l Monitor with stand  
  l Power cable   
  l VGA cable   
  l DVI cable     
						

							   
Product Features  
   
The  flat panel display has an active matrix, thin - film transistor (TFT), liquid crystal display (LCD). The monitor features include:  
■  23 inches(585mm) diagonal.   
■  2048x1152 resolution, plus full - screen support for lower resolutions.   
■  Wide viewing angle to allow viewing from a sitting or standing position, or while moving from side - to - side.   
■  Tilt adjustment capabilities.   
■  Removable pedestal and Video Electronics Standards Association (VESA) 100 mm mounting holes for flexible mounting solutions.   
■  Plug and play capability if supported by your system.   
■  On - Screen Display (OSD) adjustments for ease of set - up and screen optimization.   
■  Software and documentation media which includes an information file (INF), Image Color Matching File (ICM), and product documentation.   
■  Security lock slot.   
■  2.0 Mega pixel internal webcam with integrated microphone.   
Identifying Parts and Controls  
Front View     l USB up stream cable (enables the USB ports on the 
monitor)   
l USB down stream cable (optional)  
l Documentation (Safety Information, Quick Start Guide 
and CD)   
 
Front View  
Label Description
1 Power Control (Touch Sensor)
2  Capacitive touch keys (For more information, see  Operating the Monitor )
3 Webcam
4 Microphone  
						

							Back View  
   
Side View  
                                           
Bottom View    
Back view   Back View with monitor stand  
Label Description Use
1 VESA mounting holes (100mm)  
(Behind attached VESA plate)   T o mount the monitor.  
2 Barcode serial number label T o contact Dell for technical support.
3 Security lock slot T o help secure your monitor.
4 Dell soundbar mounting brackets To attach the optional Dell Soundbar.
5 Regulatory rating label Lists the regulatory approvals.
6 Cable management slot T o organize cables by placing them through the slot.
   
    Right view  
Label Description
1 USB downstream port  
						

							 
Bottom view  
Label Description
1 AC power cord connector
2 HDMI connector
3 DVI connector
4 VGA connector
5 Audio Line - in
6 Audio Line - out
7 USB upstream port
8 USB downstream ports(2)
Monitor Specifications  
The following sections give you information about the various power management modes and pin assignments for various connectors of your monitor.   
Power Management Modes  
If you have VESAs compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to as 
If the computer detects input from keyboard, mouse, or other input devices, the monitor automatically resumes functioning. The following table shows the power consumption and signaling of this 
automatic power saving feature:   
Activate the computer and wake up the monitor to gain access to the  OSD .  
  Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.  VESA Modes Horizontal Sync Vertical Sync  Video Power Indicator Power Consumption
Normal operation and USB active Active Active Active  White 75 W (maximum)
Normal operation Active Active Active  White 65 W (typical)
Active - off mode Inactive Inactive Blanked Amber Less than 2 W
Switch off -   -   -   Off Less than 1 W
  NOTE: The OSD functions in the Normal operation mode. One of the following messages appears when the menu key is touched in Active - off mode.
  or   
						

							Pin Assignments  
VGA Connector  
 
Pin 
Number 15 - pin Side of the Co nnected Signal Cable
1 Video - Red  
2 Video - Green
3 Video - Blue  
						

							 
 
 
 4 GND
5 Self - test
6 GND - R
7 GND - G
8 GND - B
9 Computer 5V
10 GND - sync
11 GND
12 DDC data
13 H - sync
14 V - sync
15 DDC clock
Pin 
Number 24 - pin Side of th e C o nnected  Signal 
Cable
1 TMDS RX2 -
2 TMDS RX2+
3 TMDS Ground
4 Floating
5 Floating
6 DDC Clock
7 DDC Data
8 Floating
9 TMDS RX1 -
10 TMDS RX1+
11 TMDS Ground
12 Floating
13 Floating
14 +5V power
15 Self test 
16 Hot Plug Detect
17 TMDS RX0 -
18 TMDS RX0+
19 TMDS Ground
20 Floating
21 Floating
22 TMDS Ground
23 TMDS Clock+
24 TMDS Clock -  
						

							Pin 
Number 19 - pin Side of th e C o nnected  Signal 
Cable
1 T.M.D.S. Data 2 -
2 T.M.D.S. Data 2 Shield
3 T.M.D.S. Data 2+ 
4 T.M.D.S. Data 1+
5 T.M.D.S. Data 1 Shield 
6 T.M.D.S. Data 1 -
7 T.M.D.S. Data 0+
8 T.M.D.S. Data 0 Shield 
9 T.M.D.S. Data 0 -
10 T.M.D.S. Clock +
11 T.M.D.S. Clock Shield 
12 T.M.D.S. Clock  -  
13 CEC
14 Reserved(N.C. on device) 
15 SCL
16 SDA
17 DDC/CEC Ground 
18 +5V Power 
19 Hot Plug Detect