Home > Dell > Projector > Dell M210X Projector Users Guide

Dell M210X Projector Users Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Dell M210X Projector Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Specifications51
     NOTE: The lamp life rating for any projector is a measure of brightness 
    degradation only, and is not a specification for the time it takes a lamp to fail 
    and cease light output. Lamp life is defined as the time it takes for more than 50 
    percent of a lamp sample population to have brightness decrease by 
    approximately 50 percent of the rated lumens for the specified lamp. The lamp 
    life rating is not guaranteed in any way. The actual operating life span of a 
    projector lamp will vary according to operating conditions and usage patterns. 
    Usage of a projector in stressful conditions which may include dusty 
    environments, under high temperatures, many hours per day and abrupt 
    powering-off will most likely result in a lamp’s shortened operating life span or 
    possible lamp failure. 
    						
    							52Specifications
    Compatibility Modes (Analog/Digital) 
    ResolutionRefresh Rate (Hz)Hsync Frequency 
    (KHz)Pixel Clock (MHz)
     640 x 350  70.08731.46925.175
     640 x 480  59.94031.46925.175
     640 x 480 p60 59.940 31.469 25.175
     720 x 480 p60 59.940 31.469 27.000
     720 x 576 p50 50.000 31.250 27.000
     720 x 400  70.08731.46928.322
     640 x 480  75.00037.50031.500
     848 x 48060.00031.02033.750
     640 x 480  85.00843.26936.000
     800 x 600  60.31737.87940.000
     800 x 600  75.00046.87549.500
     800 x 600  85.06153.67456.250
     1024 x 768  60.00448.36365.000
     1280 x 720 p50 50.000 37.500 74.250
     1280 x 720 p60 60.000 45.000 74.250
     1920 x 1080 i50 50.000 28.125 74.250
     1920 x 1080 i60 60.000 33.750 74.250
     1280 x 720  59.85544.77274.500
     1024 x 768  75.02960.02378.750
     1280 x 800  59.81049.70283.500
     1366 x 76859.79047.71285.500
     1360 x 768  60.01547.71285.500
     1024 x 768  84.99768.67794.500
     1440 x 900  59.88755.935106.500
     1152 x 864  75.00067.500108.000
    1280 x 96060.00060.000108.000
     1280 x 1024  60.02063.981108.000
     1152 x 864  85.00077.095119.651
     1400 x 1050  59.97865.317121.750
    1280 x 80084.88071.554122.500
     1280 x 1024  75.02579.976135.000
    1440 x 90074.98470.635136.750
     1680 x 1050  59.95465.290146.250
    1280 x 96085.00285.938148.500
     1920 x 108060.00067.500148.500
    1400 x 105074.86782.278156.000
     1280 x 1024  85.02491.146157.000
    1440 x 90084.84280.430157.000
     1600 x 1200  60.00075.000162.000 
    						
    							Contacting Dell53
    Contacting Dell
    For customers in the United States, call 800-WWW-DELL (800-999-
    3355). 
     NOTE: If you do not have an active Internet connection, you can find contact 
    information on your purchase invoice, packing slip, bill, or Dell product catalog. 
    Dell™ provides several online and telephone-based support and service 
    options. Availability varies by country and product, and some services may 
    not be available in your area. To contact Dell for sales, technical support, 
    or customer service issues:
    1Visit support.dell.com.
    2Verify your country or region in the Choose A Country/Region drop-
    down menu at the bottom of the page. 
    3Click Contact Us on the left side of the page.
    4Select the appropriate service or support link based on your need.
    5Choose the method of contacting Dell that is convenient for you. 
    						
    							54Glossary
    Appendix: Glossary
    ANSI LUMENS — A standard for measuring the brightness. It is calculated by 
    dividing a square meter image into nine equal rectangles, measuring the lux (or 
    brightness) reading at the center of each rectangle, and averaging these nine 
    points.
    A
    SPECT RATIO — The most popular aspect ratio is 4:3 (4 by 3). Early television and 
    computer video formats are in a 4:3 aspect ratio, which means that the width of 
    the image is 4/3 times the height.
    Brightness — The amount of light emitting from a display or projection display 
    or projection device. The brightness of projector is measured by ANSI lumens.
    Color Temperature — The color appearance of white light. Low color 
    temperature implies warmer (more yellow/red) light while high color temperature 
    implies a colder (more blue) light. The standard unit for color temperature is 
    Kelvin (K).
    Component Video — A method of delivering quality video in a format that 
    consists of the luminance signal and two separate chrominance signals and are 
    defined as YPbPr for analog component and YCbCr for digital component. 
    Component video is available on DVD players.
    Composite Video — A video signal that combines the luma (brightness), chroma 
    (color), burst (color reference), and sync (horizontal and vertical synchronizing 
    signals) into a signal waveform carried on a single wire pair. There are three kinds 
    of formats, namely, NTSC, PAL, and SECAM.
    Compressed Resolution — If the input images are of higher resolution than the 
    native resolution of the projector, the resulting image will be scaled to fit the 
    native resolution of the projector. The nature of compression in a digital device 
    means that some image content is lost.
    Contrast Ratio — Range of light and dark values in a picture, or the ratio between 
    their maximum and minimum values. There are two methods used by the 
    projection industry to measure the ratio:
    1Fu ll On/ Of f — measures the ratio of the light output of an all white image (full 
    on) and the light output of an all black (full off) image. 
    2ANSI — measures a pattern of 16 alternating black and white rectangles. The 
    average light output from the white rectangles is divided by the average light 
    output of the black rectangles to determine the ANSI contrast ratio. 
    Fu ll On/ Of f contrast is always a larger number than ANSI contrast for the same 
    projector. 
    						
    							Glossary55
    dB — decibel — A unit used to express relative difference in power or intensity, 
    usually between two acoustic or electric signals, equal to ten times the common 
    logarithm of the ratio of the two levels. 
    Diagonal Screen — A method of measuring the size of a screen or a projected 
    image. It measures from one corner to the opposite corner. A 9 ft high, 12 ft wide, 
    screen has a diagonal of 15 ft. This document assumes that the diagonal 
    dimensions are for the traditional 4:3 ratio of a computer image as per the example 
    above. 
    DLP
    ® — Digital Light Processing™ — Reflective display technology developed by 
    Texas Instruments, using small manipulated mirrors. Light passing through a color 
    filter is sent to the DLP mirrors which arrange the RGB colors into a picture 
    projected onto screen, also known as DMD.
    DMD — Digital Micro-Mirror Device — Each DMD consists of thousands of 
    tilting, microscopic aluminum alloy mirrors mounted on a hidden yoke.
    Focal Length — The distance from the surface of a lens to its focal point.
    Frequency — It is the rate of repetition in cycles per seconds of electrical signals. 
    Measured in Hz (Hertz).
    HDCP — High-Bandwidth Digital-Content Protection — A specification 
    developed by Intel™ Corporation to protect digital entertainment across digital 
    interface, such as DVI and HDMI.
    HDMI — High-Definition Multimedia Interface — HDMI carries both 
    uncompressed high definition video along with digital audio and device control 
    data in a single connector.
    Hz (Hertz) — Unit of frequency.
    Keystone Correction — Device that will correct an image of the distortion 
    (usually a wide-top narrow-bottom effect) of a projected image caused by 
    improper projector to screen angle.
    Maximum Distance — The distance from a screen the projector can be to cast an 
    image that is usable (bright enough) in a fully darkened room. 
    Maximum Image Size — The largest image a projector can throw in a darkened 
    room. This is usually limited by focal range of the optics. 
    Minimum Distance — The closest position that a projector can focus an image 
    onto a screen.
    NTSC — National Television Standards Committee. North American standard for 
    video and broadcasting, with a video format of 525 lines at 30 frames per second.
    PA L — Phase Alternating Line. A European broadcast standard for video and 
    broadcasting, with a video format of 625 lines at 25 frames per second. 
    						
    							56Glossary
    Reverse Image — Feature that allows you to flip the image horizontally. When 
    used in a normal forward projection environment text, graphics, etc. are 
    backwards. Reverse image is used for rear projection.
    RGB — Red, Green, Blue — typically used to describe a monitor that requires 
    separate signals for each of the three colors.
    S-Video — A video transmission standard that uses a 4-pin mini-DIN connector 
    to send video information on two signal wires called luminance (brightness, Y) and 
    chrominance (color, C). S-Video is also referred to as Y/C.
    SECAM — A French and international broadcast standard for video and 
    broadcasting, closely related to PAL but with a different method of sending color 
    information.
    SVGA — Super Video Graphics Array — 800 x 600 pixels count.
    SXGA — Super Extended Graphics Array, — 1280 x 1024 pixels count.
    UXGA — Ultra Extended Graphics Array — 1600 x 1200 pixels count.
    VGA — Video Graphics Array — 640 x 480 pixels count.
     XGA — Extended Video Graphics Array — 1024 x 768 pixels count.
    Zoom Lens — Lens with a variable focal length that allows operator to move the 
    view in or out making the image smaller or larger. 
    Zoom Lens Ratio — Is the ratio between the smallest and largest image a lens can 
    project from a fixed distance. For example, a 1.4:1 zoom lens ratio means that a 10 
    foot image without zoom would be a 14 foot image with full zoom.  
    						
    							Index57
    Index
    A
    Adjusting the Projected Image 15
    Adjusting the Projector Height
     
    15
    lower the projector
    Elevator button
     15
    Elevator foot
     15
    Tilt adjustment wheel
     15
    Adjusting the Projector Zoom and 
    Fo c u s
     16
    Fo c u s  r i n g
     16
    Zoom tab
     16
    Audio
     8
    Audio Input
     36
    Audio Settings
     35
    C
    Capture Screen 35
    Changing the Lamp
     47
    Closed Caption
     39
    Connecting the Projector
    Composite video cable
     11
    Connecting with a Component 
    Cable
     12
    Connecting with a Composite 
    Cable
     11
    Connecting with an HDMI 
    Cable
     13
    Connecting with an S-video Cable
     10
    HDMI cable
     13
    Power cord
     9, 10, 11, 12, 13
    S-video cable
     10
    To  C o m p u t e r
     9
    USB to USB cable
     9
    VGA to VGA cable
     9
    VGA to YPbPr cable
     12
    Connection Ports
    Composite video connector
     8
    S-video connector
     8
    USB remote connector
     8
    VGA input (D-sub) connector
     8
    Contact Dell
     5, 43, 47
    Control Panel
     18
    D
    Dell
    contacting
     53
    M
    Main Unit 6
    Control panel
     6
    Elevator button
     6
    Fo c u s  r i n g
     6
    IR receiver
     6
    Lens
     6
    Zoom tab
     6
    Menu Position
     34 
    						
    							58Index
    Menu Settings 34
    Menu Timeout
     35
    Menu Transparency
     35
    Mute
     36
    O
    On-Screen Display 26
    Auto-Adjust
     28
    Display (in PC Mode)
     30
    Display (in Video Mode)
     31
    Input Select
     27
    Lamp
     32
    Main Menu
     26
    Others
     34
    Picture (in PC Mode)
     28
    Picture (in Video Mode)
     28
    Set Up
     32
    P
    Password 37
    phone numbers
     53
    Po we r S a vi n g
     36
    Po we r S e t ti n g s
     36
    Powering On/Off the Projector
    Powering Off the Projector
     14
    Powering On the Projector
     14
    Q
    Quick Shutdown 36
    R
    Remote Control 21
    IR receiver
     19
    Reset
     35
    Reset, Factory
     40
    S
    Screen 35
    Screen Settings
     35
    Security Settings
     37
    Specifications
    Audio
     49
    Brightness
     49
    Color Wheel Speed
     49
    Contrast Ratio
     49
    Dimensions
     50
    Displayable Color
     49
    Environmental
     50
    I/O Connectors
     50
    Lamp
     50
    Light Valve
     49
    Noise Level
     49
    Number of Pixels
     49
    Po we r C o n su m pt io n
     49
    Po we r S u p pl y
     49
    Projection Distance
     49
    Projection Lens
     49
    Projection Screen Size
     49
    Uniformity
     49
    Video Compatibility
     49
    We i g h t
     49
    support
    contacting Dell
     53 
    						
    							Index59
    T
    telephone numbers 53
    Te s t  Pa t t e r n
     40
    Troubleshooting
     41
    Contact Dell
     41
    V
    Vo l u m e 36 
    						
    All Dell manuals Comments (0)

    Related Manuals for Dell M210X Projector Users Guide