dell latitude x300 User Manual

Dell Diagnostics: Dell Latitude X300 Service Manual 
test, press ; to retest the component that failed, press . 
l     If failures are detected during the Pre-boot System Assessment, write 
down the error code(s) and contact Dell before continuing on to the De\
ll 
Diagnostics.
If the Pre-boot System Assessment completes successfully, you receive th\
e 
message Booting Dell Diagnostic Utility Partition. Press any key to 
continue.
6.  Press any key to start the Dell Diagnostics from the diagnostics...

Dell Diagnostics: Dell Latitude X300 Service Manual 
Owners Manual for contact information.
NOTE: The Service Tag for your computer is located at the top of each test 
screen. If you contact Dell, technical support will ask for your Service\
 Tag. 
3.  If you run a test from the Custom Test or Symptom Tree option, click the  applicable tab described in the following table for more information. 
Tab Function 
Results Displays the results of the test and any error conditions encountered.
Errors Displays...

System Components: Dell Latitude X300 Service Manual 
Back to Contents Page 
System Components 
Dell™ Latitude™ X300 Service Manual 
NOTICE: Only a certified service technician should perform repairs on your 
computer. Damage due to servicing that is not authorized by Dell is not \
covered 
by your warranty. 
NOTICE: Unless otherwise noted, each procedure in this manual assumes that a 
part can be replaced by performing the removal procedure in reverse orde\
r....

System Components: Dell Latitude X300 Service Manual 
 
1 display  8speakers (2) 7C552
2 hinge covers (2)
see Mini RSL 9reserve battery W2662
3 keyboard tray  10Bluetooth™ module 2U381
4 battery M027011system board
see Mini RSL
5 cooling fan D258912palm rest G0808
6 hard drive
see Mini RSL 13keyboard 5Y730
7 bottom case
see Mini RSL     
Back to Contents Page
 
file:///F|/Service%20Manuals/Dell/Latitude/x300/system.htm (2 of 2) [2\
/28/2004 8:26:26 AM] 

Battery: Dell Latitude X300 Service Manual 
Back to Contents Page 
Battery 
Dell™ Latitude™ X300 Service Manual 
  Removing a Battery
  Installing the Battery
Removing a Battery
 CAUTION: Before performing these procedures, disconnect the modem 
from the telephone wall jack.
 CAUTION: Before you begin any of the procedures in this section, follow 
the safety instructions in the System Information Guide.
NOTICE: If you choose to replace the battery with the computer in standby 
mode, you have up to 1...

Battery: Dell Latitude X300 Service Manual 
 
1 battery latch release (2) G0767
Installing the Battery
To install the battery, slide the battery or the optional extended batte\
ry into the bay 
until the latch release clicks.
file:///F|/Service%20Manuals/Dell/Latitude/x300/battery.htm (2 of 3) [\
2/28/2004 8:26:26 AM] 

Battery: Dell Latitude X300 Service Manual 
 
1 optional extended battery Y0037
Back to Contents Page
 
file:///F|/Service%20Manuals/Dell/Latitude/x300/battery.htm (3 of 3) [\
2/28/2004 8:26:26 AM] 

Memory, Modem, and Mini PCI Card Modules: Dell Latitude X300 Service Man\
ual 
-cBack to Contents Page 
Memory, Modem, and Mini PCI Card 
Modules 
Dell™ Latitude™ X300 Service Manual 
  Adding Memory
  Replacing a Modem
  Adding a Mini PCI Card
Adding Memory
You can increase your computer memory by installing a memory module on t\
he 
system board. See the Specifications section in your System Information Guide for 
information on the memory supported by your computer. Be sure to add onl\
y a 
memory...

Memory, Modem, and Mini PCI Card Modules: Dell Latitude X300 Service Man\
ual 
NOTICE: Handle components and cards by their edges, and avoid touching pins 
and contacts. Ground yourself by touching a metal connector on the back \
of the 
computer. Continue to ground yourself periodically during this procedure\
. 
7.  Turn the computer over, unscrew both captive screw(s) from the mem\
ory  module/Mini PCI/modem cover, and remove the cover. 
 
1 captive screw (2)  
2 memory module cover H0164
NOTICE: To...

Memory, Modem, and Mini PCI Card Modules: Dell Latitude X300 Service Man\
ual 
8.  If you are replacing a memory module, remove the existing module. 
NOTICE: Handle components and cards by their edges, and avoid touching pins 
and contacts. Ground yourself by touching a metal connector on the back \
of the 
computer. Continue to ground yourself periodically during this procedure\
. a.  Use your fingertips to carefully spread apart the securing clips on \
each end  of the memory module connector until the...