dell latitude x200 User Manual

							Keyboard Tray: Dell Latitude X200 Service Manual
Back to Contents Page 
Keyboard Tray 
Dell™ Latitude™ X200 Service Manual
Removing the Keyboard Tray 
NOTICE: Disconnect the computer and any attached devices from electrical 
outlets. 
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by 
touching an unpainted metal surface on the computer. 
NOTICE: Read Preparing to Work Inside the Computer before performing the 
following procedure. 
1.  Remove the 
battery. 
2.  Remove the 
keyboard. 
3.  Remove the 
palm rest. 
4.  Remove the 
hinge covers. 
5.  Remove the 
display assembly. 
6.  Remove the seven M2 x 4-mm screws that secure the keyboard tray to the  system board. 
NOTE: Each keyboard tray screw has an arrow beside it. 
file:///F|/Service%20Manuals/Dell/Latitude/x200/keytray.htm (1 of 3) [\
2/28/2004 8:24:02 AM] 
						

							Keyboard Tray: Dell Latitude X200 Service Manual
 
1 keyboard tray
2 M2 x 4-mm screws (7)
7.  Lift the keyboard tray up and out of the bottom case. 
NOTE: The air vent on the right side of the computer comes loose when the 
keyboard tray is removed. 
Replacing the Keyboard Tray 
1.  Replace the air vent:  a.  Align the two pin holes on the bottom of the air vent with the pins on t\
he bottom case by the cooling fan. 
b.  Slide the air vent into the bottom case. 
file:///F|/Service%20Manuals/Dell/Latitude/x200/keytray.htm (2 of 3) [\
2/28/2004 8:24:02 AM] 
						

							Keyboard Tray: Dell Latitude X200 Service Manual
 
1 air vent
2 pin holes (2)
2.  Replace the keyboard tray. 
3.  Reinstall the seven M2 x 4-mm screws that secure the keyboard tray to th\
e  system board. 
Back to Contents Page
 
 
 
file:///F|/Service%20Manuals/Dell/Latitude/x200/keytray.htm (3 of 3) [\
2/28/2004 8:24:02 AM] 
						

							Reserve Battery: Dell Latitude X200 Service Manual
Back to Contents Page 
Reserve Battery 
Dell™ Latitude™ X200 Service Manual
Removing the Reserve Battery 
NOTICE: Disconnect the computer and any attached devices from electrical 
outlets. 
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by 
touching an unpainted metal surface on the computer. 
NOTICE: Read Preparing to Work Inside the Computer before performing the 
following procedure. 
1.  Remove the 
battery. 
2.  Remove the 
keyboard. 
3.  Remove the 
palm rest. 
NOTICE: Do not pull on the reserve battery cable. Pull from the reserve battery \
connector to disconnect the cable. 
4.  Disconnect the reserve battery cable from the system board connector. 
file:///F|/Service%20Manuals/Dell/Latitude/x200/rsrvbatt.htm (1 of 3) \
[2/28/2004 8:24:02 AM] 
						

							Reserve Battery: Dell Latitude X200 Service Manual
 
1 reserve battery cable
2 system board connector
3 reserve battery 
connector
4 reserve battery
5.  Pry the reserve battery free from the bottom case. The reserve battery i\
s  attached to the bottom case with a piece of adhesive tape. 
6.  Remove any remnants of the adhesive tape from the bottom case. 
Replacing the Reserve Battery 
1.  Connect the reserve battery connector to the system board connector. 
2.  Press the reserve battery into place on the bottom case. 
3.  Update the BIOS using a flash BIOS update program. For instructions on h\
ow to  flash the BIOS, see 
Flashing the BIOS. 
file:///F|/Service%20Manuals/Dell/Latitude/x200/rsrvbatt.htm (2 of 3) \
[2/28/2004 8:24:02 AM] 
						

							Reserve Battery: Dell Latitude X200 Service Manual
Back to Contents Page
 
 
 
file:///F|/Service%20Manuals/Dell/Latitude/x200/rsrvbatt.htm (3 of 3) \
[2/28/2004 8:24:02 AM] 
						

							Speakers: Dell Latitude X200 Service Manual
Back to Contents Page 
Speakers 
Dell™ Latitude™ X200 Service Manual
Removing the Speakers 
NOTICE: Disconnect the computer and any attached devices from electrical 
outlets. 
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by 
touching an unpainted metal surface on the computer. 
NOTICE: Read Preparing to Work Inside the Computer before performing the 
following procedure. 
1.  Remove the 
battery. 
2.  Remove the 
keyboard. 
3.  Remove the 
palm rest. 
4.  Remove the M2 x 4-mm screw that secures the speaker to the bottom case. \
NOTE: The left and right speakers are interchangeable. 
file:///F|/Service%20Manuals/Dell/Latitude/x200/speakers.htm (1 of 3) \
[2/28/2004 8:24:03 AM] 
						

							Speakers: Dell Latitude X200 Service Manual
 
1 system board connector
(1 per speaker)
2 speaker connector
(1 per speaker)
3 M2 x 4-mm screw
(1 per speaker)
4 speaker cable
(1 per speaker)
5 speakers (2)
NOTICE: Do not pull on the speaker cable. Pull from the speaker connector to 
disconnect the cable. 
5.  Disconnect the speaker cable from the system board connector. 
NOTICE: Handle the speakers with care to avoid damaging them. 
6.  Remove the speaker by pulling it straight up and out of the bottom case.\
 
file:///F|/Service%20Manuals/Dell/Latitude/x200/speakers.htm (2 of 3) \
[2/28/2004 8:24:03 AM] 
						

							Speakers: Dell Latitude X200 Service Manual
Back to Contents Page
 
 
 
file:///F|/Service%20Manuals/Dell/Latitude/x200/speakers.htm (3 of 3) \
[2/28/2004 8:24:03 AM] 
						

							Cooling Fan: Dell Latitude X200 Service Manual
Back to Contents Page 
Cooling Fan 
Dell™ Latitude™ X200 Service Manual
Removing the Cooling Fan 
NOTICE: Disconnect the computer and any attached devices from electrical 
outlets. 
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by 
touching an unpainted metal surface on the computer. 
NOTICE: Read Preparing to Work Inside the Computer before performing the 
following procedure. 
1.  Remove the 
battery. 
2.  Remove the 
keyboard. 
3.  Remove the 
palm rest. 
4.  Remove the 
hinge covers. 
5.  Remove the 
display assembly. 
6.  Remove the 
keyboard tray. 
7.  Remove the four M2 x 3-mm screws that secure the cooling fan to the syst\
em  board. 
file:///F|/Service%20Manuals/Dell/Latitude/x200/fan.htm (1 of 3) [2/28\
/2004 8:24:04 AM]