dell latitude x200 User Manual
Have a look at the manual dell latitude x200 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 26
Keyboard: Dell Latitude X200 Service Manual
Replacing the Keyboard
1. Place the keyboard face-down on the palm rest, with the keyboard flex ca\
ble pointing toward the back of the computer.
NOTICE: To avoid damage to the connector pins, insert the keyboard flex cable
evenly into the ZIF connector on the system board, and do not reverse th\
e
keyboard flex cable.
2. Ensure that the ZIF connector is open by pulling the ZIF connector tabs \
toward the back of the computer.
3. Press the keyboard...](http://img.usermanuals.tech/thumb/19/48104/w64_dell-latitude-x200-service-manual-25.png "Page 26
Keyboard: Dell Latitude X200 Service Manual
Replacing the Keyboard
1. Place the keyboard face-down on the palm rest, with the keyboard flex ca\
ble pointing toward the back of the computer.
NOTICE: To avoid damage to the connector pins, insert the keyboard flex cable
evenly into the ZIF connector on the system board, and do not reverse th\
e
keyboard flex cable.
2. Ensure that the ZIF connector is open by pulling the ZIF connector tabs \
toward the back of the computer.
3. Press the keyboard...")
![Page 27
Keyboard: Dell Latitude X200 Service Manual
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Latitude/x200/keyboard.htm (6 of 6) \
[2/28/2004 8:23:58 AM]](http://img.usermanuals.tech/thumb/19/48104/w64_dell-latitude-x200-service-manual-26.png "Page 27
Keyboard: Dell Latitude X200 Service Manual
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Latitude/x200/keyboard.htm (6 of 6) \
[2/28/2004 8:23:58 AM]")
![Page 29
Palm Rest: Dell Latitude X200 Service Manual
1 M2 x 4-mm screws (4)
4. Turn the computer over, and open the display (if you have not already r\
emoved the display).
5. Lift the back edge of the palm rest, and rotate the palm rest forward.
6. Lift the ZIF connector, and disconnect the palm-rest flex cable from its\
ZIF connector on the system board.
file:///F|/Service%20Manuals/Dell/Latitude/x200/palmrest.htm (2 of 4) \
[2/28/2004 8:23:59 AM]](http://img.usermanuals.tech/thumb/19/48104/w64_dell-latitude-x200-service-manual-28.png "Page 29
Palm Rest: Dell Latitude X200 Service Manual
1 M2 x 4-mm screws (4)
4. Turn the computer over, and open the display (if you have not already r\
emoved the display).
5. Lift the back edge of the palm rest, and rotate the palm rest forward.
6. Lift the ZIF connector, and disconnect the palm-rest flex cable from its\
ZIF connector on the system board.
file:///F|/Service%20Manuals/Dell/Latitude/x200/palmrest.htm (2 of 4) \
[2/28/2004 8:23:59 AM]")
![Page 30
Palm Rest: Dell Latitude X200 Service Manual
1 palm-rest flex cable
2 ZIF connector
7. Lift the palm rest up and out of the computer.
Replacing the Palm Rest
To aid with proper flex cable connection, a blue locator line has been a\
dded near the
end of the palm-rest flex cable. When replacing the palm-rest flex cable\
, press the
cable into the connector until the blue line aligns with the system boar\
d and hold it
steady while you snap the ZIF connector down. (The blue line may reappe\
ar after...](http://img.usermanuals.tech/thumb/19/48104/w64_dell-latitude-x200-service-manual-29.png "Page 30
Palm Rest: Dell Latitude X200 Service Manual
1 palm-rest flex cable
2 ZIF connector
7. Lift the palm rest up and out of the computer.
Replacing the Palm Rest
To aid with proper flex cable connection, a blue locator line has been a\
dded near the
end of the palm-rest flex cable. When replacing the palm-rest flex cable\
, press the
cable into the connector until the blue line aligns with the system boar\
d and hold it
steady while you snap the ZIF connector down. (The blue line may reappe\
ar after...")
![Page 31
Palm Rest: Dell Latitude X200 Service Manual
file:///F|/Service%20Manuals/Dell/Latitude/x200/palmrest.htm (4 of 4) \
[2/28/2004 8:23:59 AM]](http://img.usermanuals.tech/thumb/19/48104/w64_dell-latitude-x200-service-manual-30.png "Page 31
Palm Rest: Dell Latitude X200 Service Manual
file:///F|/Service%20Manuals/Dell/Latitude/x200/palmrest.htm (4 of 4) \
[2/28/2004 8:23:59 AM]")
![Page 33
Hard Drive: Dell Latitude X200 Service Manual
1 hard drive
2 M2 x 5.5-mm screws (3)
3 hard drive connector
5. Disconnect the hard drive connector from the system board.
6. Lift the hard drive up and out of the bottom case.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Latitude/x200/hdd.htm (2 of 2) [2/28\
/2004 8:24:00 AM]](http://img.usermanuals.tech/thumb/19/48104/w64_dell-latitude-x200-service-manual-32.png "Page 33
Hard Drive: Dell Latitude X200 Service Manual
1 hard drive
2 M2 x 5.5-mm screws (3)
3 hard drive connector
5. Disconnect the hard drive connector from the system board.
6. Lift the hard drive up and out of the bottom case.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Latitude/x200/hdd.htm (2 of 2) [2/28\
/2004 8:24:00 AM]")
![Page 34
Hinge Covers and Display Assembly: Dell Latitude X200 Service Manual
Back to Contents Page
Hinge Covers and Display Assembly
Dell™ Latitude™ X200 Service Manual
Hinge Covers
Display Assembly
Hinge Covers
Removing the Hinge Covers
1. Remove the battery.
2. On the inside of the battery bay, use your fingers to unhook the hinge c\
overs from the back of the computer.
file:///F|/Service%20Manuals/Dell/Latitude/x200/display.htm (1 of 7) [\
2/28/2004 8:24:01 AM]](http://img.usermanuals.tech/thumb/19/48104/w64_dell-latitude-x200-service-manual-33.png "Page 34
Hinge Covers and Display Assembly: Dell Latitude X200 Service Manual
Back to Contents Page
Hinge Covers and Display Assembly
Dell™ Latitude™ X200 Service Manual
Hinge Covers
Display Assembly
Hinge Covers
Removing the Hinge Covers
1. Remove the battery.
2. On the inside of the battery bay, use your fingers to unhook the hinge c\
overs from the back of the computer.
file:///F|/Service%20Manuals/Dell/Latitude/x200/display.htm (1 of 7) [\
2/28/2004 8:24:01 AM]")
![Page 35
Hinge Covers and Display Assembly: Dell Latitude X200 Service Manual
1hinge covers (2)
3. Open the display 180 degrees.
4. Push up on the hinge covers to remove them from the computer.
Replacing the Hinge Covers
1. Open the computer all the way (180 degrees) so that it lies flat again\
st your work surface.
2. Place the hinge covers over the display hinges: a. The left hinge cover fits over the power button and the right hinge cove\
r fits over the Dell™ AccessDirect™ button. Both hinge covers...](http://img.usermanuals.tech/thumb/19/48104/w64_dell-latitude-x200-service-manual-34.png "Page 35
Hinge Covers and Display Assembly: Dell Latitude X200 Service Manual
1hinge covers (2)
3. Open the display 180 degrees.
4. Push up on the hinge covers to remove them from the computer.
Replacing the Hinge Covers
1. Open the computer all the way (180 degrees) so that it lies flat again\
st your work surface.
2. Place the hinge covers over the display hinges: a. The left hinge cover fits over the power button and the right hinge cove\
r fits over the Dell™ AccessDirect™ button. Both hinge covers...")
![Page 36
Hinge Covers and Display Assembly: Dell Latitude X200 Service Manual
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
touching an unpainted metal surface on the computer.
NOTICE: Read Preparing to Work Inside the Computer before performing the
following procedure.
1. Remove the
battery.
2. Remove the
keyboard.
3. Remove the two M2 x 6-mm screws by the display hinges on the top of the \
computer.
1 M2 x 6-mm screws (2)
4. Turn the computer over, and remove the...](http://img.usermanuals.tech/thumb/19/48104/w64_dell-latitude-x200-service-manual-35.png "Page 36
Hinge Covers and Display Assembly: Dell Latitude X200 Service Manual
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
touching an unpainted metal surface on the computer.
NOTICE: Read Preparing to Work Inside the Computer before performing the
following procedure.
1. Remove the
battery.
2. Remove the
keyboard.
3. Remove the two M2 x 6-mm screws by the display hinges on the top of the \
computer.
1 M2 x 6-mm screws (2)
4. Turn the computer over, and remove the...")
Palm Rest: Dell Latitude X200 Service Manual file:///F|/Service%20Manuals/Dell/Latitude/x200/palmrest.htm (4 of 4) \ [2/28/2004 8:23:59 AM]
Hard Drive: Dell Latitude X200 Service Manual Back to Contents Page Hard Drive Dell™ Latitude™ X200 Service Manual Removing the Hard Drive NOTICE: Disconnect the computer and any attached devices from electrical outlets. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer. NOTICE: Read Preparing to Work Inside the Computer before performing the following procedure. 1. Remove the battery. 2. Remove the keyboard. 3. Remove the palm rest. 4. Loosen the three M2 x 5.5-mm screws that secure the hard drive to the bo\ ttom case. Rubber grommets secure each screw to the hard drive so that you do not n\ eed to completely remove the screws. NOTE: Each hard drive screw has an arrow beside it. file:///F|/Service%20Manuals/Dell/Latitude/x200/hdd.htm (1 of 2) [2/28\ /2004 8:24:00 AM]
Hard Drive: Dell Latitude X200 Service Manual 1 hard drive 2 M2 x 5.5-mm screws (3) 3 hard drive connector 5. Disconnect the hard drive connector from the system board. 6. Lift the hard drive up and out of the bottom case. Back to Contents Page file:///F|/Service%20Manuals/Dell/Latitude/x200/hdd.htm (2 of 2) [2/28\ /2004 8:24:00 AM]
Hinge Covers and Display Assembly: Dell Latitude X200 Service Manual Back to Contents Page Hinge Covers and Display Assembly Dell™ Latitude™ X200 Service Manual Hinge Covers Display Assembly Hinge Covers Removing the Hinge Covers 1. Remove the battery. 2. On the inside of the battery bay, use your fingers to unhook the hinge c\ overs from the back of the computer. file:///F|/Service%20Manuals/Dell/Latitude/x200/display.htm (1 of 7) [\ 2/28/2004 8:24:01 AM]
Hinge Covers and Display Assembly: Dell Latitude X200 Service Manual 1hinge covers (2) 3. Open the display 180 degrees. 4. Push up on the hinge covers to remove them from the computer. Replacing the Hinge Covers 1. Open the computer all the way (180 degrees) so that it lies flat again\ st your work surface. 2. Place the hinge covers over the display hinges: a. The left hinge cover fits over the power button and the right hinge cove\ r fits over the Dell™ AccessDirect™ button. Both hinge covers pass t\ hrough the display hinges to the back of the computer. b. Ensure that the two securing tabs on the outer edge of each hinge cover \ are engaged in their respective slots. 3. Press down on the top of each hinge cover to snap the hinge covers into \ place. 4. Close the display. 5. Press the back of each hinge cover into the back of the computer. NOTE: The back of each hinge cover has a tab that snaps into a slot on the back of the computer. Display Assembly Removing the Display Assembly NOTICE: Disconnect the computer and any attached devices from electrical outlets. file:///F|/Service%20Manuals/Dell/Latitude/x200/display.htm (2 of 7) [\ 2/28/2004 8:24:01 AM]
Hinge Covers and Display Assembly: Dell Latitude X200 Service Manual NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer. NOTICE: Read Preparing to Work Inside the Computer before performing the following procedure. 1. Remove the battery. 2. Remove the keyboard. 3. Remove the two M2 x 6-mm screws by the display hinges on the top of the \ computer. 1 M2 x 6-mm screws (2) 4. Turn the computer over, and remove the two M3 x 5-mm screws from the bottom of the computer. file:///F|/Service%20Manuals/Dell/Latitude/x200/display.htm (3 of 7) [\ 2/28/2004 8:24:01 AM]
Hinge Covers and Display Assembly: Dell Latitude X200 Service Manual 1 M3 x 5-mm screws (2) 5. Turn the computer over, and open the display 180 degrees. 6. Disconnect the antenna connector. file:///F|/Service%20Manuals/Dell/Latitude/x200/display.htm (4 of 7) [\ 2/28/2004 8:24:01 AM]
Hinge Covers and Display Assembly: Dell Latitude X200 Service Manual NOTICE: Do not pull on the signal cable and inverter cable. Pull from the signal\ connector and inverter connector to disconnect the cables. 7. Disconnect the signal cable from the system board. 8. Remove the tape that secures the inverter connector, and then disconnect\ the inverter cable from the system board. file:///F|/Service%20Manuals/Dell/Latitude/x200/display.htm (5 of 7) [\ 2/28/2004 8:24:01 AM]
Hinge Covers and Display Assembly: Dell Latitude X200 Service Manual 1 signal cable 2 inverter cable 3 inverter connector 4 signal connector 9. Move the display assembly to an upright position and pull it up out of t\ he bottom case. Back to Contents Page file:///F|/Service%20Manuals/Dell/Latitude/x200/display.htm (6 of 7) [\ 2/28/2004 8:24:01 AM]
Hinge Covers and Display Assembly: Dell Latitude X200 Service Manual file:///F|/Service%20Manuals/Dell/Latitude/x200/display.htm (7 of 7) [\ 2/28/2004 8:24:01 AM]