dell latitude v700 User Manual

							Microprocessor Module : Dell Latitude V700 Service Manual 
bend the pins. 
Replacing the Microprocessor Module 
NOTICE: After replacing the microprocessor module, update the BIOS using a 
flash BIOS update program floppy disk or CD that came with the replaceme\
nt 
microprocessor. 
NOTICE: Proper seating of the microprocessor module does not require force. 
NOTICE: A microprocessor module that is not properly seated can result in an 
intermittent connection and subsequent failures. 
1.  Align the pin-1 triangle on the microprocessor toward the pin-1 triangle\
 in the  socket, insert the microprocessor into the socket, and move it around sl\
ightly 
until you feel it settle into the socket. 
When the microprocessor module is correctly seated, all four corners are\
 aligned 
to the same height. If one or more corners of the module are higher than\
 the 
others, the module is not seated correctly.
2.  Tighten the cam lock screw. 
NOTICE: Do not over or under tighten the screw. Tighten it until the screw 
indicator points to the closed or locked indicator on the socket. 
3.  Replace the microprocessor thermal cooling assembly. 
4.  While pressing lightly down on the center of the retaining clip, insert \
a pry stick  into the latch mechanism and pivot the top of the pry stick away from th\
e clip to 
close the latch. 
file:///F|/Service%20Manuals/Dell/Latitude/v700/cpu.htm (3 of 4) [2/28\
/2004 8:20:10 AM] 
						

							Microprocessor Module : Dell Latitude V700 Service Manual 
 
Back to Contents Page
 
 
 
file:///F|/Service%20Manuals/Dell/Latitude/v700/cpu.htm (4 of 4) [2/28\
/2004 8:20:10 AM] 
						

							Video Memory Cache Card (Optional) : Dell Latitude V700 Service Manual\
 
Back to Contents Page 
Video Memory Cache Card (Optional) 
Dell™ Latitude™ V700 Service Manual 
NOTICE: Disconnect the computer and attached devices from electrical outlets 
and remove any installed battery. 
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by 
periodically touching an unpainted metal surface on the computer. 
Removing the Video Memory Cache Card 
1.  Follow the instructions in Preparing to Work Inside the Computer. 
2.  Remove the 
keyboard. 
3.  Remove the 
hinge cover. 
4.  Remove the two M2.5 x 4-mm screws that secure the video memory cache car\
d. 
5.  Lift the video memory cache card out of the system board connector. 
Replacing the Video Memory Cache Card 
1.  Align the two screw holes and press down firmly to seat the card in its \
 connector. 
2.  Replace the two screws. 
file:///F|/Service%20Manuals/Dell/Latitude/v700/vidmem.htm (1 of 2) [2\
/28/2004 8:20:10 AM] 
						

							Video Memory Cache Card (Optional) : Dell Latitude V700 Service Manual\
 
 
Back to Contents Page
 
 
 
file:///F|/Service%20Manuals/Dell/Latitude/v700/vidmem.htm (2 of 2) [2\
/28/2004 8:20:10 AM] 
						

							Palm Rest : Dell Latitude V700 Service Manual 
Back to Contents Page 
Palm Rest 
Dell™ Latitude™ V700 Service Manual 
Removing the Palm Rest 
 
NOTICE: Disconnect the computer and attached devices from electrical outlets 
and remove any installed battery. 
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by 
periodically touching an unpainted metal surface on the computer. 
1.  Follow the instructions in 
Preparing to Work Inside the Computer. 
2.  Remove the 
hard drive and the fixed optical drive. 
file:///F|/Service%20Manuals/Dell/Latitude/v700/palmrest.htm (1 of 3) \
[2/28/2004 8:20:11 AM] 
						

							Palm Rest : Dell Latitude V700 Service Manual 
3.  Remove the keyboard. 
4.  Remove the 
hinge cover. 
5.  Remove the 
display. 
NOTICE: To avoid damaging the palm rest, you must first remove the display 
assembly. 
6.  Turn the computer over. 
7.  Remove the nine M2.5 x 20-mm screws (labeled with a circle P) that s\
ecure  the palm rest to the computer. 
 
file:///F|/Service%20Manuals/Dell/Latitude/v700/palmrest.htm (2 of 3) \
[2/28/2004 8:20:11 AM] 
						

							Palm Rest : Dell Latitude V700 Service Manual 
8.  Turn the computer over. 
9.  Use the pull loop to disconnect the palm rest flex cable from the touch-\
pad connector on the system board. 
10.  Carefully lift out the palm rest. 
Back to Contents Page
 
 
 
file:///F|/Service%20Manuals/Dell/Latitude/v700/palmrest.htm (3 of 3) \
[2/28/2004 8:20:11 AM] 
						

							LED Board : Dell Latitude V700 Service Manual 
Back to Contents Page 
LED Board 
Dell™ Latitude™ V700 Service Manual 
 
NOTICE: Disconnect the computer and attached devices from electrical outlets 
and remove any installed battery. 
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by 
periodically touching an unpainted metal surface on the computer. 
file:///F|/Service%20Manuals/Dell/Latitude/v700/led.htm (1 of 2) [2/28\
/2004 8:20:11 AM] 
						

							LED Board : Dell Latitude V700 Service Manual 
Removing the LED Board 
1.  Follow the instructions in Preparing to Work Inside the Computer. 
2.  Remove the 
hinge cover. 
3.  Remove the two M2 x 4-mm screws. 
4.  Lift the LED board out of connector. 
Replacing the LED Board 
1.  Align the two screw holes with the two mounting holes on the bottom case\
  assembly, and press the board into its connector. 
2.  Replace the two M2 x 4-mm screws. 
Back to Contents Page
 
 
 
file:///F|/Service%20Manuals/Dell/Latitude/v700/led.htm (2 of 2) [2/28\
/2004 8:20:11 AM] 
						

							System Board : Dell Latitude V700 Service Manual 
Back to Contents Page 
System Board 
Dell™ Latitude™ V700 Service Manual 
 
NOTICE: Disconnect the computer and attached devices from electrical outlets 
and remove any installed battery. 
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by 
periodically touching an unpainted metal surface on the computer. 
The system boards BIOS contains the system service tag number, which is\
 also 
visible on a bar-code label on the bottom of the computer. The replaceme\
nt kit for the 
file:///F|/Service%20Manuals/Dell/Latitude/v700/sysboard.htm (1 of 3) \
[2/28/2004 8:20:12 AM]