dell latitude v700 User Manual

							Display : Dell Latitude V700 Service Manual 
 
NOTICE: When reconnecting the display flex cable, press down on both ends of 
the connector, not in the middle. Pressing the middle of the connector c\
an 
damage fragile components. 
3.  Remove the 
display bezel. 
4.  Remove the M2.5 x 6-mm screw securing the display flex-cable mounting  bracket to the top cover assembly. 
5.  Remove the four M2 x 3-mm screws (two on each side) from the right and\
 left  sides of the panel. 
6.  Lift the display panel and flex cable out of the top cover assembly. 
7.  Disconnect the display flex cable from the two connectors (a ZIF and a \
standard  connector) on the display panel. 
NOTE: If you find a kaption tape on the standard connector, remove it. 
file:///F|/Service%20Manuals/Dell/Latitude/v700/display.htm (8 of 12) \
[2/28/2004 8:20:09 AM] 
						

							Display : Dell Latitude V700 Service Manual 
 
Replacing the Display Panel 
NOTE: Use a magnetic screwdriver to reassemble the display panel in the 
display. 
1.  Connect the display flex cable to the two connectors (ensure that the Z\
IF  connector is locked into place) on the back of the display panel. 
2.  Place the display panel in the top cover, taking care that the display f\
lex cable is  in place and is not crushed or crimped. 
file:///F|/Service%20Manuals/Dell/Latitude/v700/display.htm (9 of 12) \
[2/28/2004 8:20:09 AM] 
						

							Display : Dell Latitude V700 Service Manual 
3.  Reinstall the M2.5 x 4-mm screw that secures the flex-cable mounting bra\
cket to the top cover. 
4.  Starting on the left side, use a magnetic screwdriver to reinstall the f\
our M2 x 3- mm screws that secure the display panel in the top cover. 
5.  Reinstall the display bezel. 
Display Latch
 
1.  Remove the 
hinge cover. 
2.  Remove the screw securing the display flex cable to its strain relief, a\
nd then  use the pull loop to remove the flex cable from the system board memory \
cache 
card. 
file:///F|/Service%20Manuals/Dell/Latitude/v700/display.htm (10 of 12)\
 [2/28/2004 8:20:09 AM] 
						

							Display : Dell Latitude V700 Service Manual 
NOTICE: When reconnecting the display flex cable, press down on both ends of 
the connector, not in the middle. Pressing the middle of the connector c\
an 
damage fragile components. 
 
3.  Remove the 
display bezel. 
4.  Remove the display panel from the top cover. 
5.  Remove the display latch by unsnapping the latch and captive spring. 
NOTICE: When replacing the display latch, it may help to flex the cover slightly\
 
to allow more space while seating the latch. 
Back to Contents Page
 
 
file:///F|/Service%20Manuals/Dell/Latitude/v700/display.htm (11 of 12)\
 [2/28/2004 8:20:09 AM] 
						

							Display : Dell Latitude V700 Service Manual 
 
file:///F|/Service%20Manuals/Dell/Latitude/v700/display.htm (12 of 12)\
 [2/28/2004 8:20:09 AM] 
						

							Microprocessor Thermal Cooling Assembly : Dell Latitude V700 Service Man\
ual 
Back to Contents Page 
Microprocessor Thermal Cooling 
Assembly 
Dell™ Latitude™ V700 Service Manual 
 
NOTICE: Disconnect the computer and attached devices from electrical outlets 
and remove any installed battery. 
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by 
periodically touching an unpainted metal surface on the computer. 
file:///F|/Service%20Manuals/Dell/Latitude/v700/thermal.htm (1 of 3) [\
2/28/2004 8:20:09 AM] 
						

							Microprocessor Thermal Cooling Assembly : Dell Latitude V700 Service Man\
ual 
Removing the Microprocessor Thermal Cooling 
Assembly 
 
1.  Follow the instructions in 
Preparing to Work Inside the Computer. 
2.  Remove the 
keyboard. 
3.  Remove the 
hinge cover. 
NOTICE: To ensure maximum cooling for the microprocessor, do not touch the 
heat transfer areas on the thermal cooling assembly. The oils in your sk\
in 
reduce the heat transfer capability of the thermal pads. 
4.  Insert a pry stick into the latch mechanism at the left side of the micr\
oprocessor  retaining clip, and pry open the clip. 
5.  Lift out the thermal cooling assembly. 
file:///F|/Service%20Manuals/Dell/Latitude/v700/thermal.htm (2 of 3) [\
2/28/2004 8:20:09 AM] 
						

							Microprocessor Thermal Cooling Assembly : Dell Latitude V700 Service Man\
ual 
Back to Contents Page
 
 
 
file:///F|/Service%20Manuals/Dell/Latitude/v700/thermal.htm (3 of 3) [\
2/28/2004 8:20:09 AM] 
						

							Microprocessor Module : Dell Latitude V700 Service Manual 
Back to Contents Page 
Microprocessor Module 
Dell™ Latitude™ V700 Service Manual 
 
NOTICE: Disconnect the computer and attached devices from electrical outlets 
and remove any installed battery. 
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by 
periodically touching an unpainted metal surface on the computer. 
Removing the Microprocessor Module 
1.  Follow the instructions in Preparing to Work Inside the Computer. 
2.  Remove the 
keyboard. 
3.  Remove the 
hinge cover. 
4.  Remove the 
microprocessor thermal cooling assembly. 
file:///F|/Service%20Manuals/Dell/Latitude/v700/cpu.htm (1 of 4) [2/28\
/2004 8:20:10 AM] 
						

							Microprocessor Module : Dell Latitude V700 Service Manual 
NOTICE: To ensure maximum cooling for the microprocessor, do not touch the 
heat transfer areas on the thermal cooling assembly. The oils in your sk\
in 
reduce the heat transfer capability of the thermal pads. 
5.  Remove the microprocessor module. 
NOTICE: When removing the microprocessor module, pull the module straight 
up. Do not bend the pins.  a.  Loosen the microprocessor socket cam lock screw. The location of the  screw and the rotation direction may vary with the socket manufacturer; \
look for small icons indicating open and locked positions. 
 
b.  Use the microprocessor extraction tool to remove the microprocessor  module. 
c.  To remove the microprocessor module, pull the module straight up. Do not\
 
file:///F|/Service%20Manuals/Dell/Latitude/v700/cpu.htm (2 of 4) [2/28\
/2004 8:20:10 AM]