dell latitude c610 c510 User Manual
Here you can view all the pages of manual dell latitude c610 c510 User Manual. The Dell manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
Palm Rest: Dell Latitude C610/C510 Service Manual
Back to Contents Page
Palm Rest
Dell™ Latitude™ C610/C510 Service Manual
Removing the Palm Rest
Removing the Palm Rest
NOTICE: Disconnect the computer and any attached devices from electrical outlets\
, and
remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by tou\
ching
an unpainted metal surface on the computer.
NOTICE: Read Preparing to Work Inside the Computer before performing the...](http://img.usermanuals.tech/thumb/19/48082/w300_dell-latitude-c610-c510-service-manual-40.png "Page 41
Palm Rest: Dell Latitude C610/C510 Service Manual
Back to Contents Page
Palm Rest
Dell™ Latitude™ C610/C510 Service Manual
Removing the Palm Rest
Removing the Palm Rest
NOTICE: Disconnect the computer and any attached devices from electrical outlets\
, and
remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by tou\
ching
an unpainted metal surface on the computer.
NOTICE: Read Preparing to Work Inside the Computer before performing the...")
Palm Rest: Dell Latitude C610/C510 Service Manual Back to Contents Page Palm Rest Dell™ Latitude™ C610/C510 Service Manual Removing the Palm Rest Removing the Palm Rest NOTICE: Disconnect the computer and any attached devices from electrical outlets\ , and remove any installed batteries. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by tou\ ching an unpainted metal surface on the computer. NOTICE: Read Preparing to Work Inside the Computer before performing the...
Page 42
![Page 42
Palm Rest: Dell Latitude C610/C510 Service Manual
1 M2.5 x 12-mm screws (3)
2 M2 x 3-mm screws (2)
3 hard-drive bay door
5. Remove the two M2 x 3-mm screws that are located in the hard-drive bay d\
oor labeled circle P.
6. Turn the computer over, and remove the three M2 x 3-mm screws that secur\
e the palm rest to the bottom case.
a. Remove the two M2 x 3-mm screws that are located on the back edge of the\
bottom case, underneath the display assembly.
b. Remove the M2 x 3-mm screw located...](http://img.usermanuals.tech/thumb/19/48082/w300_dell-latitude-c610-c510-service-manual-41.png "Page 42
Palm Rest: Dell Latitude C610/C510 Service Manual
1 M2.5 x 12-mm screws (3)
2 M2 x 3-mm screws (2)
3 hard-drive bay door
5. Remove the two M2 x 3-mm screws that are located in the hard-drive bay d\
oor labeled circle P.
6. Turn the computer over, and remove the three M2 x 3-mm screws that secur\
e the palm rest to the bottom case.
a. Remove the two M2 x 3-mm screws that are located on the back edge of the\
bottom case, underneath the display assembly.
b. Remove the M2 x 3-mm screw located...")
Palm Rest: Dell Latitude C610/C510 Service Manual 1 M2.5 x 12-mm screws (3) 2 M2 x 3-mm screws (2) 3 hard-drive bay door 5. Remove the two M2 x 3-mm screws that are located in the hard-drive bay d\ oor labeled circle P. 6. Turn the computer over, and remove the three M2 x 3-mm screws that secur\ e the palm rest to the bottom case. a. Remove the two M2 x 3-mm screws that are located on the back edge of the\ bottom case, underneath the display assembly. b. Remove the M2 x 3-mm screw located...
Page 43
![Page 43
Palm Rest: Dell Latitude C610/C510 Service Manual
1 M2 x 3-mm screws (3)
2 palm rest
3 palm-rest flex cable
4 bottom case
5 touch pad connector
6 back center of the palm rest
NOTICE: Carefully separate the palm rest from the bottom case to avoid damage to\
the
palm rest.
8. Starting at the back center of the palm rest, use your fingers to separa\
te the palm rest from the bottom case by lifting up the inside of the palm rest while pus\
hing in on the
outside....](http://img.usermanuals.tech/thumb/19/48082/w300_dell-latitude-c610-c510-service-manual-42.png "Page 43
Palm Rest: Dell Latitude C610/C510 Service Manual
1 M2 x 3-mm screws (3)
2 palm rest
3 palm-rest flex cable
4 bottom case
5 touch pad connector
6 back center of the palm rest
NOTICE: Carefully separate the palm rest from the bottom case to avoid damage to\
the
palm rest.
8. Starting at the back center of the palm rest, use your fingers to separa\
te the palm rest from the bottom case by lifting up the inside of the palm rest while pus\
hing in on the
outside....")
Palm Rest: Dell Latitude C610/C510 Service Manual 1 M2 x 3-mm screws (3) 2 palm rest 3 palm-rest flex cable 4 bottom case 5 touch pad connector 6 back center of the palm rest NOTICE: Carefully separate the palm rest from the bottom case to avoid damage to\ the palm rest. 8. Starting at the back center of the palm rest, use your fingers to separa\ te the palm rest from the bottom case by lifting up the inside of the palm rest while pus\ hing in on the outside....
Page 44
![Page 44
Palm Rest: Dell Latitude C610/C510 Service Manual
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Latitude/c510-610/palmrest.htm (4 of \
4) [2/28/2004 7:55:50 AM]](http://img.usermanuals.tech/thumb/19/48082/w300_dell-latitude-c610-c510-service-manual-43.png "Page 44
Palm Rest: Dell Latitude C610/C510 Service Manual
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Latitude/c510-610/palmrest.htm (4 of \
4) [2/28/2004 7:55:50 AM]")
Palm Rest: Dell Latitude C610/C510 Service Manual Back to Contents Page file:///F|/Service%20Manuals/Dell/Latitude/c510-610/palmrest.htm (4 of \ 4) [2/28/2004 7:55:50 AM]
Page 45
![Page 45
Microprocessor Thermal Cooling Assembly: Dell Latitude C610/C510 Service\
Manual
Back to Contents Page
Microprocessor Thermal Cooling
Assembly
Dell™ Latitude™ C610/C510 Service Manual
Removing the Microprocessor Thermal Cooling Assembly
Replacing the Microprocessor Thermal Cooling Assembly
Removing the Microprocessor Thermal Cooling
Assembly
NOTICE: Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground...](http://img.usermanuals.tech/thumb/19/48082/w300_dell-latitude-c610-c510-service-manual-44.png "Page 45
Microprocessor Thermal Cooling Assembly: Dell Latitude C610/C510 Service\
Manual
Back to Contents Page
Microprocessor Thermal Cooling
Assembly
Dell™ Latitude™ C610/C510 Service Manual
Removing the Microprocessor Thermal Cooling Assembly
Replacing the Microprocessor Thermal Cooling Assembly
Removing the Microprocessor Thermal Cooling
Assembly
NOTICE: Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground...")
Microprocessor Thermal Cooling Assembly: Dell Latitude C610/C510 Service\ Manual Back to Contents Page Microprocessor Thermal Cooling Assembly Dell™ Latitude™ C610/C510 Service Manual Removing the Microprocessor Thermal Cooling Assembly Replacing the Microprocessor Thermal Cooling Assembly Removing the Microprocessor Thermal Cooling Assembly NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries. NOTICE: To avoid ESD, ground...
Page 46
![Page 46
Microprocessor Thermal Cooling Assembly: Dell Latitude C610/C510 Service\
Manual
1 microprocessor thermal cooling assembly
2 captive screws (4)
3 right side
4. Lift the microprocessor thermal cooling assembly up and out of the syste\
m board.
Replacing the Microprocessor Thermal Cooling
Assembly
1. Place the right side of the microprocessor thermal cooling assembly unde\
r the
file:///F|/Service%20Manuals/Dell/Latitude/c510-610/thermal.htm (2 of 3\
) [2/28/2004 7:55:51 AM]](http://img.usermanuals.tech/thumb/19/48082/w300_dell-latitude-c610-c510-service-manual-45.png "Page 46
Microprocessor Thermal Cooling Assembly: Dell Latitude C610/C510 Service\
Manual
1 microprocessor thermal cooling assembly
2 captive screws (4)
3 right side
4. Lift the microprocessor thermal cooling assembly up and out of the syste\
m board.
Replacing the Microprocessor Thermal Cooling
Assembly
1. Place the right side of the microprocessor thermal cooling assembly unde\
r the
file:///F|/Service%20Manuals/Dell/Latitude/c510-610/thermal.htm (2 of 3\
) [2/28/2004 7:55:51 AM]")
Microprocessor Thermal Cooling Assembly: Dell Latitude C610/C510 Service\ Manual 1 microprocessor thermal cooling assembly 2 captive screws (4) 3 right side 4. Lift the microprocessor thermal cooling assembly up and out of the syste\ m board. Replacing the Microprocessor Thermal Cooling Assembly 1. Place the right side of the microprocessor thermal cooling assembly unde\ r the file:///F|/Service%20Manuals/Dell/Latitude/c510-610/thermal.htm (2 of 3\ ) [2/28/2004 7:55:51 AM]
Page 47
![Page 47
Microprocessor Thermal Cooling Assembly: Dell Latitude C610/C510 Service\
Manual
palm rest and lower the assembly onto the system board.
2. Tighten the four captive screws, labeled 1 through 4, in consecutive ord\
er.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Latitude/c510-610/thermal.htm (3 of 3\
) [2/28/2004 7:55:51 AM]](http://img.usermanuals.tech/thumb/19/48082/w300_dell-latitude-c610-c510-service-manual-46.png "Page 47
Microprocessor Thermal Cooling Assembly: Dell Latitude C610/C510 Service\
Manual
palm rest and lower the assembly onto the system board.
2. Tighten the four captive screws, labeled 1 through 4, in consecutive ord\
er.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Latitude/c510-610/thermal.htm (3 of 3\
) [2/28/2004 7:55:51 AM]")
Microprocessor Thermal Cooling Assembly: Dell Latitude C610/C510 Service\ Manual palm rest and lower the assembly onto the system board. 2. Tighten the four captive screws, labeled 1 through 4, in consecutive ord\ er. Back to Contents Page file:///F|/Service%20Manuals/Dell/Latitude/c510-610/thermal.htm (3 of 3\ ) [2/28/2004 7:55:51 AM]
Page 48
Microprocessor Module: Dell Latitude C610/C510 Service Manual Back to Contents Page Microprocessor Module Dell™ Latitude™ C610/C510 Service Manual Removing the Microprocessor Module Replacing the Microprocessor Module Removing the Microprocessor Module NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the...
Page 49
![Page 49
Microprocessor Module: Dell Latitude C610/C510 Service Manual
1 screwdriver (perpendicular to microprocessor)
2 pin-1 corner
3 processor die (do not touch)
4 ZIF socket
5 ZIF-socket cam screw
1. Remove the
hard drive.
2. Remove the
keyboard.
NOTICE: To ensure maximum cooling for the microprocessor, do not touch the
heat transfer areas on the microprocessor thermal cooling assembly. The \
oils in
your skin reduce the heat transfer capability of the thermal pads.
3. Remove the
microprocessor...](http://img.usermanuals.tech/thumb/19/48082/w300_dell-latitude-c610-c510-service-manual-48.png "Page 49
Microprocessor Module: Dell Latitude C610/C510 Service Manual
1 screwdriver (perpendicular to microprocessor)
2 pin-1 corner
3 processor die (do not touch)
4 ZIF socket
5 ZIF-socket cam screw
1. Remove the
hard drive.
2. Remove the
keyboard.
NOTICE: To ensure maximum cooling for the microprocessor, do not touch the
heat transfer areas on the microprocessor thermal cooling assembly. The \
oils in
your skin reduce the heat transfer capability of the thermal pads.
3. Remove the
microprocessor...")
Microprocessor Module: Dell Latitude C610/C510 Service Manual 1 screwdriver (perpendicular to microprocessor) 2 pin-1 corner 3 processor die (do not touch) 4 ZIF socket 5 ZIF-socket cam screw 1. Remove the hard drive. 2. Remove the keyboard. NOTICE: To ensure maximum cooling for the microprocessor, do not touch the heat transfer areas on the microprocessor thermal cooling assembly. The \ oils in your skin reduce the heat transfer capability of the thermal pads. 3. Remove the microprocessor...
Page 50
![Page 50
Microprocessor Module: Dell Latitude C610/C510 Service Manual
NOTICE: When removing the microprocessor module, pull the module straight
up. Be careful not to bend the pins on the microprocessor module.
4. To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate\
the ZIF- socket cam screw counter-clockwise until it comes to the cam stop.
The ZIF-socket cam screw secures the microprocessor to the system board.\
Take
note of the arrow on the ZIF-socket cam screw (see
Microprocessor...](http://img.usermanuals.tech/thumb/19/48082/w300_dell-latitude-c610-c510-service-manual-49.png "Page 50
Microprocessor Module: Dell Latitude C610/C510 Service Manual
NOTICE: When removing the microprocessor module, pull the module straight
up. Be careful not to bend the pins on the microprocessor module.
4. To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate\
the ZIF- socket cam screw counter-clockwise until it comes to the cam stop.
The ZIF-socket cam screw secures the microprocessor to the system board.\
Take
note of the arrow on the ZIF-socket cam screw (see
Microprocessor...")
Microprocessor Module: Dell Latitude C610/C510 Service Manual NOTICE: When removing the microprocessor module, pull the module straight up. Be careful not to bend the pins on the microprocessor module. 4. To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate\ the ZIF- socket cam screw counter-clockwise until it comes to the cam stop. The ZIF-socket cam screw secures the microprocessor to the system board.\ Take note of the arrow on the ZIF-socket cam screw (see Microprocessor...