dell latitude c600 c500 series User Manual
Here you can view all the pages of manual dell latitude c600 c500 series User Manual. The Dell manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Ma\
nual
1. Remove the
hard drive.
2. Remove the
keyboard assembly.
3. Remove the
display assembly.
4. Remove the
palmrest assembly.
file:///F|/Service%20Manuals/Dell/Latitude/c500-600/remove.htm (34 of 4\
0) [2/28/2004 7:53:33 AM]](http://img.usermanuals.tech/thumb/19/48081/w300_dell-latitude-c600-c500-series-service-manual-40.png "Page 41
Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Ma\
nual
1. Remove the
hard drive.
2. Remove the
keyboard assembly.
3. Remove the
display assembly.
4. Remove the
palmrest assembly.
file:///F|/Service%20Manuals/Dell/Latitude/c500-600/remove.htm (34 of 4\
0) [2/28/2004 7:53:33 AM]")
Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Ma\ nual 1. Remove the hard drive. 2. Remove the keyboard assembly. 3. Remove the display assembly. 4. Remove the palmrest assembly. file:///F|/Service%20Manuals/Dell/Latitude/c500-600/remove.htm (34 of 4\ 0) [2/28/2004 7:53:33 AM]
Page 42
![Page 42
Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Ma\
nual
5. Disconnect the speaker interface cable connectors.
NOTICE: Do not pull the antenna cable when removing the speaker (see Speaker Assemblies).
6. Remove the speaker assemblies by pulling them straight up and out of\
the bottom case assembly
NOTICE: Handle the speaker assemblies and speakers with care to avoid damaging t\
he speaker
cones.
NOTE: The left speaker has an in-line connector, and its cable is longer than \...](http://img.usermanuals.tech/thumb/19/48081/w300_dell-latitude-c600-c500-series-service-manual-41.png "Page 42
Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Ma\
nual
5. Disconnect the speaker interface cable connectors.
NOTICE: Do not pull the antenna cable when removing the speaker (see Speaker Assemblies).
6. Remove the speaker assemblies by pulling them straight up and out of\
the bottom case assembly
NOTICE: Handle the speaker assemblies and speakers with care to avoid damaging t\
he speaker
cones.
NOTE: The left speaker has an in-line connector, and its cable is longer than \...")
Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Ma\ nual 5. Disconnect the speaker interface cable connectors. NOTICE: Do not pull the antenna cable when removing the speaker (see Speaker Assemblies). 6. Remove the speaker assemblies by pulling them straight up and out of\ the bottom case assembly NOTICE: Handle the speaker assemblies and speakers with care to avoid damaging t\ he speaker cones. NOTE: The left speaker has an in-line connector, and its cable is longer than \...
Page 43
![Page 43
Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Ma\
nual
Removing the System Board
NOTICE: Disconnect the computer and any attached devices from electrical outlets\
, and remove
any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by per\
iodically
touching an unpainted metal on the computer.
NOTICE: Read Preparing to Work Inside the Computer before performing the following
procedure.
1. Remove the
hard drive.
2. Remove the...](http://img.usermanuals.tech/thumb/19/48081/w300_dell-latitude-c600-c500-series-service-manual-42.png "Page 43
Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Ma\
nual
Removing the System Board
NOTICE: Disconnect the computer and any attached devices from electrical outlets\
, and remove
any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by per\
iodically
touching an unpainted metal on the computer.
NOTICE: Read Preparing to Work Inside the Computer before performing the following
procedure.
1. Remove the
hard drive.
2. Remove the...")
Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Ma\ nual Removing the System Board NOTICE: Disconnect the computer and any attached devices from electrical outlets\ , and remove any installed batteries. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by per\ iodically touching an unpainted metal on the computer. NOTICE: Read Preparing to Work Inside the Computer before performing the following procedure. 1. Remove the hard drive. 2. Remove the...
Page 44
![Page 44
Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Ma\
nual
bottom case assembly. The fan guard is located on the right of the botto\
m case assembly.
System Board Assembly
11. Turn the bottom case assembly over and remove the M2.5 x 5-mm screw\
, which is identified by a white circle B and arrow on a red label attached to the top of the bat\
tery connector on the front
center of the system board.
12. Remove the
speakers from the bottom case assembly.
13. Pull the right...](http://img.usermanuals.tech/thumb/19/48081/w300_dell-latitude-c600-c500-series-service-manual-43.png "Page 44
Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Ma\
nual
bottom case assembly. The fan guard is located on the right of the botto\
m case assembly.
System Board Assembly
11. Turn the bottom case assembly over and remove the M2.5 x 5-mm screw\
, which is identified by a white circle B and arrow on a red label attached to the top of the bat\
tery connector on the front
center of the system board.
12. Remove the
speakers from the bottom case assembly.
13. Pull the right...")
Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Ma\ nual bottom case assembly. The fan guard is located on the right of the botto\ m case assembly. System Board Assembly 11. Turn the bottom case assembly over and remove the M2.5 x 5-mm screw\ , which is identified by a white circle B and arrow on a red label attached to the top of the bat\ tery connector on the front center of the system board. 12. Remove the speakers from the bottom case assembly. 13. Pull the right...
Page 45
![Page 45
Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Ma\
nual
b. Replace the nine M2.5 x 5-mm screws, starting on the right side of t\
he bottom case assembly.
c. Replace the fan guard cover, inserting the tab into the bottom case \
assembly and replace the three M2.5 x 5-mm screws (see
Removing the System Board Assembly Screws). If you
replace the screw opposite the tab first, it makes it easier to insert a\
nd replace the other two
screws.
4. Replace the memory modules,...](http://img.usermanuals.tech/thumb/19/48081/w300_dell-latitude-c600-c500-series-service-manual-44.png "Page 45
Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Ma\
nual
b. Replace the nine M2.5 x 5-mm screws, starting on the right side of t\
he bottom case assembly.
c. Replace the fan guard cover, inserting the tab into the bottom case \
assembly and replace the three M2.5 x 5-mm screws (see
Removing the System Board Assembly Screws). If you
replace the screw opposite the tab first, it makes it easier to insert a\
nd replace the other two
screws.
4. Replace the memory modules,...")
Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Ma\ nual b. Replace the nine M2.5 x 5-mm screws, starting on the right side of t\ he bottom case assembly. c. Replace the fan guard cover, inserting the tab into the bottom case \ assembly and replace the three M2.5 x 5-mm screws (see Removing the System Board Assembly Screws). If you replace the screw opposite the tab first, it makes it easier to insert a\ nd replace the other two screws. 4. Replace the memory modules,...
Page 46
![Page 46
Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Ma\
nual
Removing the Battery and Modular Bay Latch Assemblies
NOTICE: Disconnect the computer and any attached devices from electrical outlets\
, and remove
any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by tou\
ching an
unpainted metal surface on the computer.
NOTICE: Read Preparing to Work Inside the Computer before performing the following
procedure.
1. Remove the
hard...](http://img.usermanuals.tech/thumb/19/48081/w300_dell-latitude-c600-c500-series-service-manual-45.png "Page 46
Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Ma\
nual
Removing the Battery and Modular Bay Latch Assemblies
NOTICE: Disconnect the computer and any attached devices from electrical outlets\
, and remove
any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by tou\
ching an
unpainted metal surface on the computer.
NOTICE: Read Preparing to Work Inside the Computer before performing the following
procedure.
1. Remove the
hard...")
Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Ma\ nual Removing the Battery and Modular Bay Latch Assemblies NOTICE: Disconnect the computer and any attached devices from electrical outlets\ , and remove any installed batteries. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by tou\ ching an unpainted metal surface on the computer. NOTICE: Read Preparing to Work Inside the Computer before performing the following procedure. 1. Remove the hard...
Page 47
![Page 47
Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Ma\
nual
Apply pressure to the latch and spring while unsnapping the snap tabs to\
prevent the latch assembly
from coming loose from the case. If the latch assembly does come loose f\
rom the case:a. Reinsert the spring onto the slider on the latch, and reinstall the modu\
le latch into the holding features on the inside of the case.
b. Ensure that the slider is inserted in its respective hole, that the side\
of the latch with...](http://img.usermanuals.tech/thumb/19/48081/w300_dell-latitude-c600-c500-series-service-manual-46.png "Page 47
Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Ma\
nual
Apply pressure to the latch and spring while unsnapping the snap tabs to\
prevent the latch assembly
from coming loose from the case. If the latch assembly does come loose f\
rom the case:a. Reinsert the spring onto the slider on the latch, and reinstall the modu\
le latch into the holding features on the inside of the case.
b. Ensure that the slider is inserted in its respective hole, that the side\
of the latch with...")
Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Ma\ nual Apply pressure to the latch and spring while unsnapping the snap tabs to\ prevent the latch assembly from coming loose from the case. If the latch assembly does come loose f\ rom the case:a. Reinsert the spring onto the slider on the latch, and reinstall the modu\ le latch into the holding features on the inside of the case. b. Ensure that the slider is inserted in its respective hole, that the side\ of the latch with...