dell inspiron 8200 User Manual
Have a look at the manual dell inspiron 8200 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 155
Battery and Module Bay Latches: Dell Inspiron 8200
b. Ensure that the slider is inserted so that the side with the two bumps i\
s facing the back of the bottom case, and the surface with the wear ribs l\
ies
against the upper surface of the bottom case.
7. Hold the upper latch assembly in place while you snap the new latch butt\
on in from underneath the bottom case, making certain the snap tabs are fully \
engaged in the slider.
Ensure that the newly installed latch assembly moves smoothly and...](http://img.usermanuals.tech/thumb/19/48076/w64_dell-inspiron-8200-154.png "Page 155
Battery and Module Bay Latches: Dell Inspiron 8200
b. Ensure that the slider is inserted so that the side with the two bumps i\
s facing the back of the bottom case, and the surface with the wear ribs l\
ies
against the upper surface of the bottom case.
7. Hold the upper latch assembly in place while you snap the new latch butt\
on in from underneath the bottom case, making certain the snap tabs are fully \
engaged in the slider.
Ensure that the newly installed latch assembly moves smoothly and...")
![Page 157
Battery Charger Board: Dell Inspiron 8200
4. Remove the display assembly.
5. Remove the
palm rest.
6. Remove the
video graphics board.
7. Lift the battery charger board out of the system board connector.
Replacing the Battery Charger Board
Align the screw holes on the battery charger board with the screw holes \
on the bottom
case, and then press the battery charger board down into its connector.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/battch.htm (2 of 2)...](http://img.usermanuals.tech/thumb/19/48076/w64_dell-inspiron-8200-156.png "Page 157
Battery Charger Board: Dell Inspiron 8200
4. Remove the display assembly.
5. Remove the
palm rest.
6. Remove the
video graphics board.
7. Lift the battery charger board out of the system board connector.
Replacing the Battery Charger Board
Align the screw holes on the battery charger board with the screw holes \
on the bottom
case, and then press the battery charger board down into its connector.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/battch.htm (2 of 2)...")
![Page 158
LED Board: Dell Inspiron 8200
Back to Contents Page
LED Board
Dell™ Inspiron™ 8200
NOTICE: Disconnect the computer and attached devices from electrical outlets
and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
periodically touching unpainted metal on the computer.
1 M2 x 4-mm screws (2)
file:///F|/Service%20Manuals/Dell/Inspiron/8200/led.htm (1 of 2) [2/28\
/2004 7:40:59 AM]](http://img.usermanuals.tech/thumb/19/48076/w64_dell-inspiron-8200-157.png "Page 158
LED Board: Dell Inspiron 8200
Back to Contents Page
LED Board
Dell™ Inspiron™ 8200
NOTICE: Disconnect the computer and attached devices from electrical outlets
and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
periodically touching unpainted metal on the computer.
1 M2 x 4-mm screws (2)
file:///F|/Service%20Manuals/Dell/Inspiron/8200/led.htm (1 of 2) [2/28\
/2004 7:40:59 AM]")
![Page 159
LED Board: Dell Inspiron 8200
Removing the LED Board
1. Follow the instructions in Preparing to Work Inside the Computer.
2. Remove the
hinge cover.
3. Remove the two M2 x 4-mm screws.
4. Lift the LED board away from its connector.
Replacing the LED Board
1. Align the two screw holes with the two mounting holes on the bottom case\
, and press the board into its connector.
2. Replace the two M2 x 4-mm screws.
Back to Contents Page...](http://img.usermanuals.tech/thumb/19/48076/w64_dell-inspiron-8200-158.png "Page 159
LED Board: Dell Inspiron 8200
Removing the LED Board
1. Follow the instructions in Preparing to Work Inside the Computer.
2. Remove the
hinge cover.
3. Remove the two M2 x 4-mm screws.
4. Lift the LED board away from its connector.
Replacing the LED Board
1. Align the two screw holes with the two mounting holes on the bottom case\
, and press the board into its connector.
2. Replace the two M2 x 4-mm screws.
Back to Contents Page...")
![Page 161
Fan: Dell Inspiron 8200
2. Remove the system board.
3. Remove the three M2 x 4-mm screws from the fan.
4. Disconnect the two fan cables from the system board.
5. Pull the fan away from the back-panel bracket.
NOTICE: When reconnecting the fan cables, connect the shorter cable to the
connector closest to the fan. Route both cables so that they will not be\
pinched
by the microprocessor thermal-cooling assembly.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/fan.htm...](http://img.usermanuals.tech/thumb/19/48076/w64_dell-inspiron-8200-160.png "Page 161
Fan: Dell Inspiron 8200
2. Remove the system board.
3. Remove the three M2 x 4-mm screws from the fan.
4. Disconnect the two fan cables from the system board.
5. Pull the fan away from the back-panel bracket.
NOTICE: When reconnecting the fan cables, connect the shorter cable to the
connector closest to the fan. Route both cables so that they will not be\
pinched
by the microprocessor thermal-cooling assembly.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/fan.htm...")
![Page 162
RJ-11/RJ-45 Module: Dell Inspiron 8200
Back to Contents Page
RJ-11/RJ-45 Module
Dell™ Inspiron™ 8200
NOTICE: Disconnect the computer and attached devices from electrical outlets
and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
periodically touching unpainted metal on the computer.
NOTICE: 1 network cable
2 bottom case
3 RJ-11/RJ-45 module
4 modem cable
file:///F|/Service%20Manuals/Dell/Inspiron/8200/rj11_45b.htm (1 of 3) \
[2/28/2004...](http://img.usermanuals.tech/thumb/19/48076/w64_dell-inspiron-8200-161.png "Page 162
RJ-11/RJ-45 Module: Dell Inspiron 8200
Back to Contents Page
RJ-11/RJ-45 Module
Dell™ Inspiron™ 8200
NOTICE: Disconnect the computer and attached devices from electrical outlets
and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
periodically touching unpainted metal on the computer.
NOTICE: 1 network cable
2 bottom case
3 RJ-11/RJ-45 module
4 modem cable
file:///F|/Service%20Manuals/Dell/Inspiron/8200/rj11_45b.htm (1 of 3) \
[2/28/2004...")
![Page 163
RJ-11/RJ-45 Module: Dell Inspiron 8200
Removing the RJ-11/RJ-45 Module
1. Follow the instructions in Preparing to Work Inside the Computer.
2. Remove the
system board.
3. From outside the bottom case, push in and up on the RJ-11/RJ-45 module w\
hile pulling the side of the bottom case slightly outward. When the module
disengages, lift it out.
Replacing the RJ-11/RJ-45 Module
When replacing the RJ-11/RJ-45 module, hold both cables safely out of th\
e way and
snap the housing down into place....](http://img.usermanuals.tech/thumb/19/48076/w64_dell-inspiron-8200-162.png "Page 163
RJ-11/RJ-45 Module: Dell Inspiron 8200
Removing the RJ-11/RJ-45 Module
1. Follow the instructions in Preparing to Work Inside the Computer.
2. Remove the
system board.
3. From outside the bottom case, push in and up on the RJ-11/RJ-45 module w\
hile pulling the side of the bottom case slightly outward. When the module
disengages, lift it out.
Replacing the RJ-11/RJ-45 Module
When replacing the RJ-11/RJ-45 module, hold both cables safely out of th\
e way and
snap the housing down into place....")
![Page 164
RJ-11/RJ-45 Module: Dell Inspiron 8200
1 vertical slot
2 modem cable
When replacing the system board, ensure that the network cable is safely\
above the
board and out of the way.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/rj11_45b.htm (3 of 3) \
[2/28/2004 7:41:00 AM]](http://img.usermanuals.tech/thumb/19/48076/w64_dell-inspiron-8200-163.png "Page 164
RJ-11/RJ-45 Module: Dell Inspiron 8200
1 vertical slot
2 modem cable
When replacing the system board, ensure that the network cable is safely\
above the
board and out of the way.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/rj11_45b.htm (3 of 3) \
[2/28/2004 7:41:00 AM]")
Fan: Dell Inspiron 8200 2. Remove the system board. 3. Remove the three M2 x 4-mm screws from the fan. 4. Disconnect the two fan cables from the system board. 5. Pull the fan away from the back-panel bracket. NOTICE: When reconnecting the fan cables, connect the shorter cable to the connector closest to the fan. Route both cables so that they will not be\ pinched by the microprocessor thermal-cooling assembly. Back to Contents Page file:///F|/Service%20Manuals/Dell/Inspiron/8200/fan.htm (2 of 2) [2/28\ /2004 7:41:00 AM]
RJ-11/RJ-45 Module: Dell Inspiron 8200 Back to Contents Page RJ-11/RJ-45 Module Dell™ Inspiron™ 8200 NOTICE: Disconnect the computer and attached devices from electrical outlets and remove any installed batteries. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching unpainted metal on the computer. NOTICE: 1 network cable 2 bottom case 3 RJ-11/RJ-45 module 4 modem cable file:///F|/Service%20Manuals/Dell/Inspiron/8200/rj11_45b.htm (1 of 3) \ [2/28/2004 7:41:00 AM]
RJ-11/RJ-45 Module: Dell Inspiron 8200 Removing the RJ-11/RJ-45 Module 1. Follow the instructions in Preparing to Work Inside the Computer. 2. Remove the system board. 3. From outside the bottom case, push in and up on the RJ-11/RJ-45 module w\ hile pulling the side of the bottom case slightly outward. When the module disengages, lift it out. Replacing the RJ-11/RJ-45 Module When replacing the RJ-11/RJ-45 module, hold both cables safely out of th\ e way and snap the housing down into place. Then route the modem cable through the\ vertical slot, through the appropriate posts, and out through the corner of the m\ emory module/modem cutout. file:///F|/Service%20Manuals/Dell/Inspiron/8200/rj11_45b.htm (2 of 3) \ [2/28/2004 7:41:00 AM]
RJ-11/RJ-45 Module: Dell Inspiron 8200 1 vertical slot 2 modem cable When replacing the system board, ensure that the network cable is safely\ above the board and out of the way. Back to Contents Page file:///F|/Service%20Manuals/Dell/Inspiron/8200/rj11_45b.htm (3 of 3) \ [2/28/2004 7:41:00 AM]