DELL inspiron 4100 User Manual
Here you can view all the pages of manual DELL inspiron 4100 User Manual. The Dell manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 121
![Page 121
Keyboard: Dell Inspiron 4150
1keyboard
2 track stick
3 blank key
4 palm rest
6. Lift the keyboard straight up until it clears the keyboard boss support \
in the bottom case.
7. Rotate the keyboard forward toward the front of the computer.
8. Rest the key face of the keyboard on the palm rest.
NOTICE: Do not pull on the keyboard flex and track stick cables.
9. Pull up on the keyboard connector to disconnect it from the interface co\
nnector on the system board....](http://img.usermanuals.tech/thumb/19/48065/w300_dell-inspiron-4100-120.png "Page 121
Keyboard: Dell Inspiron 4150
1keyboard
2 track stick
3 blank key
4 palm rest
6. Lift the keyboard straight up until it clears the keyboard boss support \
in the bottom case.
7. Rotate the keyboard forward toward the front of the computer.
8. Rest the key face of the keyboard on the palm rest.
NOTICE: Do not pull on the keyboard flex and track stick cables.
9. Pull up on the keyboard connector to disconnect it from the interface co\
nnector on the system board....")
Keyboard: Dell Inspiron 4150 1keyboard 2 track stick 3 blank key 4 palm rest 6. Lift the keyboard straight up until it clears the keyboard boss support \ in the bottom case. 7. Rotate the keyboard forward toward the front of the computer. 8. Rest the key face of the keyboard on the palm rest. NOTICE: Do not pull on the keyboard flex and track stick cables. 9. Pull up on the keyboard connector to disconnect it from the interface co\ nnector on the system board....
Page 122
![Page 122
Keyboard: Dell Inspiron 4150
1boss support (5)
2 track stick cable
3 keyboard flex cable
4 keyboard connector
5 orientation label
10. Remove the keyboard from the bottom case.
Replacing the Keyboard
1. Place the keyboard on the palm rest at the front of the computer with th\
e keys face down and the connector toward the back of the computer.
NOTICE: To avoid damage to the connector pins, press the keyboard connector
evenly into the interface connector on the system board, and do not reve\
rse the...](http://img.usermanuals.tech/thumb/19/48065/w300_dell-inspiron-4100-121.png "Page 122
Keyboard: Dell Inspiron 4150
1boss support (5)
2 track stick cable
3 keyboard flex cable
4 keyboard connector
5 orientation label
10. Remove the keyboard from the bottom case.
Replacing the Keyboard
1. Place the keyboard on the palm rest at the front of the computer with th\
e keys face down and the connector toward the back of the computer.
NOTICE: To avoid damage to the connector pins, press the keyboard connector
evenly into the interface connector on the system board, and do not reve\
rse the...")
Keyboard: Dell Inspiron 4150 1boss support (5) 2 track stick cable 3 keyboard flex cable 4 keyboard connector 5 orientation label 10. Remove the keyboard from the bottom case. Replacing the Keyboard 1. Place the keyboard on the palm rest at the front of the computer with th\ e keys face down and the connector toward the back of the computer. NOTICE: To avoid damage to the connector pins, press the keyboard connector evenly into the interface connector on the system board, and do not reve\ rse the...
Page 123
![Page 123
Keyboard: Dell Inspiron 4150
6. Reinstall the five M2.5 x 12-mm screws in the holes labeled circle K. \
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/4150/keyboard.htm (6 of 6) \
[2/28/2004 7:29:42 AM]](http://img.usermanuals.tech/thumb/19/48065/w300_dell-inspiron-4100-122.png "Page 123
Keyboard: Dell Inspiron 4150
6. Reinstall the five M2.5 x 12-mm screws in the holes labeled circle K. \
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/4150/keyboard.htm (6 of 6) \
[2/28/2004 7:29:42 AM]")
Keyboard: Dell Inspiron 4150 6. Reinstall the five M2.5 x 12-mm screws in the holes labeled circle K. \ Back to Contents Page file:///F|/Service%20Manuals/Dell/Inspiron/4150/keyboard.htm (6 of 6) \ [2/28/2004 7:29:42 AM]
Page 124
![Page 124
Display, Display Assembly, Display Latch, and Hinge Covers: Dell Inspiro\
n 4150
Back to Contents Page
Display, Display Assembly, Display
Latch, and Hinge Covers
Dell™ Inspiron™ 4150
Display
Display Assembly
Display Latch
Hinge Covers
Display
NOTICE: You must remove the display before you remove the palm rest.
NOTICE: Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist...](http://img.usermanuals.tech/thumb/19/48065/w300_dell-inspiron-4100-123.png "Page 124
Display, Display Assembly, Display Latch, and Hinge Covers: Dell Inspiro\
n 4150
Back to Contents Page
Display, Display Assembly, Display
Latch, and Hinge Covers
Dell™ Inspiron™ 4150
Display
Display Assembly
Display Latch
Hinge Covers
Display
NOTICE: You must remove the display before you remove the palm rest.
NOTICE: Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist...")
Display, Display Assembly, Display Latch, and Hinge Covers: Dell Inspiro\ n 4150 Back to Contents Page Display, Display Assembly, Display Latch, and Hinge Covers Dell™ Inspiron™ 4150 Display Display Assembly Display Latch Hinge Covers Display NOTICE: You must remove the display before you remove the palm rest. NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries. NOTICE: To avoid ESD, ground yourself by using a wrist...
Page 125
![Page 125
Display, Display Assembly, Display Latch, and Hinge Covers: Dell Inspiro\
n 4150
1 M2 x 3-mm screws (4)
2 top cover
3 center control cover
4 M2.5 x 5-mm screws (5)
5 bottom case
6 EMI shield bracket
1. Remove the
hard drive.
2. Remove the
center control cover.
file:///F|/Service%20Manuals/Dell/Inspiron/4150/display.htm (2 of 13) \
[2/28/2004 7:29:44 AM]](http://img.usermanuals.tech/thumb/19/48065/w300_dell-inspiron-4100-124.png "Page 125
Display, Display Assembly, Display Latch, and Hinge Covers: Dell Inspiro\
n 4150
1 M2 x 3-mm screws (4)
2 top cover
3 center control cover
4 M2.5 x 5-mm screws (5)
5 bottom case
6 EMI shield bracket
1. Remove the
hard drive.
2. Remove the
center control cover.
file:///F|/Service%20Manuals/Dell/Inspiron/4150/display.htm (2 of 13) \
[2/28/2004 7:29:44 AM]")
Display, Display Assembly, Display Latch, and Hinge Covers: Dell Inspiro\ n 4150 1 M2 x 3-mm screws (4) 2 top cover 3 center control cover 4 M2.5 x 5-mm screws (5) 5 bottom case 6 EMI shield bracket 1. Remove the hard drive. 2. Remove the center control cover. file:///F|/Service%20Manuals/Dell/Inspiron/4150/display.htm (2 of 13) \ [2/28/2004 7:29:44 AM]
Page 126
![Page 126
Display, Display Assembly, Display Latch, and Hinge Covers: Dell Inspiro\
n 4150
3. Remove the keyboard.
4. Close the display.
5. From the back of the computer, remove the five M2.5 x 5-mm screws la\
beled circle D.
6. Open the display approximately 180 degrees and support the display s\
o that it does not open past this position.
7. Remove the two M2 x 3-mm screws on the EMI shield bracket, which is \
attached to the display-feed flex cable.
8. Remove the two M2 x 3-mm screws that secure...](http://img.usermanuals.tech/thumb/19/48065/w300_dell-inspiron-4100-125.png "Page 126
Display, Display Assembly, Display Latch, and Hinge Covers: Dell Inspiro\
n 4150
3. Remove the keyboard.
4. Close the display.
5. From the back of the computer, remove the five M2.5 x 5-mm screws la\
beled circle D.
6. Open the display approximately 180 degrees and support the display s\
o that it does not open past this position.
7. Remove the two M2 x 3-mm screws on the EMI shield bracket, which is \
attached to the display-feed flex cable.
8. Remove the two M2 x 3-mm screws that secure...")
Display, Display Assembly, Display Latch, and Hinge Covers: Dell Inspiro\ n 4150 3. Remove the keyboard. 4. Close the display. 5. From the back of the computer, remove the five M2.5 x 5-mm screws la\ beled circle D. 6. Open the display approximately 180 degrees and support the display s\ o that it does not open past this position. 7. Remove the two M2 x 3-mm screws on the EMI shield bracket, which is \ attached to the display-feed flex cable. 8. Remove the two M2 x 3-mm screws that secure...
Page 127
![Page 127
Display, Display Assembly, Display Latch, and Hinge Covers: Dell Inspiro\
n 4150
1 M2 x 3-mm screws (2)
9. Pull up on the pull-tab that is attached to the display-feed flex ca\
ble connector to remove the tab from the interface connector on the system board.
10. Pivot the display up to a 90-degree angle, and lift it up and out o\
f the bottom case.
Display Assembly
file:///F|/Service%20Manuals/Dell/Inspiron/4150/display.htm (4 of 13) \
[2/28/2004 7:29:44 AM]](http://img.usermanuals.tech/thumb/19/48065/w300_dell-inspiron-4100-126.png "Page 127
Display, Display Assembly, Display Latch, and Hinge Covers: Dell Inspiro\
n 4150
1 M2 x 3-mm screws (2)
9. Pull up on the pull-tab that is attached to the display-feed flex ca\
ble connector to remove the tab from the interface connector on the system board.
10. Pivot the display up to a 90-degree angle, and lift it up and out o\
f the bottom case.
Display Assembly
file:///F|/Service%20Manuals/Dell/Inspiron/4150/display.htm (4 of 13) \
[2/28/2004 7:29:44 AM]")
Display, Display Assembly, Display Latch, and Hinge Covers: Dell Inspiro\ n 4150 1 M2 x 3-mm screws (2) 9. Pull up on the pull-tab that is attached to the display-feed flex ca\ ble connector to remove the tab from the interface connector on the system board. 10. Pivot the display up to a 90-degree angle, and lift it up and out o\ f the bottom case. Display Assembly file:///F|/Service%20Manuals/Dell/Inspiron/4150/display.htm (4 of 13) \ [2/28/2004 7:29:44 AM]
Page 128
![Page 128
Display, Display Assembly, Display Latch, and Hinge Covers: Dell Inspiro\
n 4150
1 rubber screw covers
(4) 5
M2 x 4-mm screws (5)
2 M2.5 x 5-mm screws
(4) 6
display-feed flex cable
3 display bezel 7flex-cable retention bracket
file:///F|/Service%20Manuals/Dell/Inspiron/4150/display.htm (5 of 13) \
[2/28/2004 7:29:44 AM]](http://img.usermanuals.tech/thumb/19/48065/w300_dell-inspiron-4100-127.png "Page 128
Display, Display Assembly, Display Latch, and Hinge Covers: Dell Inspiro\
n 4150
1 rubber screw covers
(4) 5
M2 x 4-mm screws (5)
2 M2.5 x 5-mm screws
(4) 6
display-feed flex cable
3 display bezel 7flex-cable retention bracket
file:///F|/Service%20Manuals/Dell/Inspiron/4150/display.htm (5 of 13) \
[2/28/2004 7:29:44 AM]")
Display, Display Assembly, Display Latch, and Hinge Covers: Dell Inspiro\ n 4150 1 rubber screw covers (4) 5 M2 x 4-mm screws (5) 2 M2.5 x 5-mm screws (4) 6 display-feed flex cable 3 display bezel 7flex-cable retention bracket file:///F|/Service%20Manuals/Dell/Inspiron/4150/display.htm (5 of 13) \ [2/28/2004 7:29:44 AM]
Page 129
![Page 129
Display, Display Assembly, Display Latch, and Hinge Covers: Dell Inspiro\
n 4150
4top cover 8display panel
Removing the Display Bezel
NOTICE: Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
touching an unpainted metal surface on the computer.
NOTICE: Read Preparing to Work Inside the Computer before performing the
following procedure.
1. Remove the
hard...](http://img.usermanuals.tech/thumb/19/48065/w300_dell-inspiron-4100-128.png "Page 129
Display, Display Assembly, Display Latch, and Hinge Covers: Dell Inspiro\
n 4150
4top cover 8display panel
Removing the Display Bezel
NOTICE: Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
touching an unpainted metal surface on the computer.
NOTICE: Read Preparing to Work Inside the Computer before performing the
following procedure.
1. Remove the
hard...")
Display, Display Assembly, Display Latch, and Hinge Covers: Dell Inspiro\ n 4150 4top cover 8display panel Removing the Display Bezel NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer. NOTICE: Read Preparing to Work Inside the Computer before performing the following procedure. 1. Remove the hard...
Page 130
![Page 130
Display, Display Assembly, Display Latch, and Hinge Covers: Dell Inspiro\
n 4150
NOTICE: Read Preparing to Work Inside the Computer before performing the
following procedure.
1. Remove the
hard drive.
2. Remove the
display.
3. Remove the
display bezel.
4. Remove the
hinge covers.
5. Remove the two M2 x 4-mm screws on the left side of the display pane\
l and the two M2 x 4-mm screws on the right side of the display panel.
HINT: If you have a Hitachi display panel, remove the two M2 x...](http://img.usermanuals.tech/thumb/19/48065/w300_dell-inspiron-4100-129.png "Page 130
Display, Display Assembly, Display Latch, and Hinge Covers: Dell Inspiro\
n 4150
NOTICE: Read Preparing to Work Inside the Computer before performing the
following procedure.
1. Remove the
hard drive.
2. Remove the
display.
3. Remove the
display bezel.
4. Remove the
hinge covers.
5. Remove the two M2 x 4-mm screws on the left side of the display pane\
l and the two M2 x 4-mm screws on the right side of the display panel.
HINT: If you have a Hitachi display panel, remove the two M2 x...")
Display, Display Assembly, Display Latch, and Hinge Covers: Dell Inspiro\ n 4150 NOTICE: Read Preparing to Work Inside the Computer before performing the following procedure. 1. Remove the hard drive. 2. Remove the display. 3. Remove the display bezel. 4. Remove the hinge covers. 5. Remove the two M2 x 4-mm screws on the left side of the display pane\ l and the two M2 x 4-mm screws on the right side of the display panel. HINT: If you have a Hitachi display panel, remove the two M2 x...