Dell In2030m Users Guide

							Back to Contents Page    
 
Appendix   
IN1930/IN2030M  Monitor Users Guide  
  Safety Instructions  
  FCC Notice (U.S. Only) and Other Regulatory Information   
  Contacting Dell  
    
   
WARNING: Safety Instructions  
For information on safety instructions, see the  Product Information Guide .   
FCC Notices (U.S. Only) and Other Regulatory Information  
For FCC notices and other regulatory information, see the regulatory compliance website located at  www.dell.com
egulatory_compliance .  
:  
(1) this device may not cause harmful interference  
(2yfWKLVGHYLFHPXVWDFFHSWDQ\LQWHUIHUHQFHUHFHLYHGLQFOXGLQJLQWHUIHUHQFHWKDWPD\FDXVHXQGHVLUHGRSHUDWLRn    
Contacting Dell  
For customers in the United States, call 800 - WWW - DELL (800 - 999 - 3355).  
Dell provides several online and telephone - based support and service options. Availability varies by country and product, and some services may not be 
available in your area. To contact Dell for sales, technical support, or customer service issues:  
 
Back to Contents Page  WARNING:  Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, 
electrical hazards, and/or mechanical hazards. 
NOTE:  If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, 
or Dell product catalog. 
1. Visit  support.dell.com . 
2.  Verify your country or region in the  Choose A Country/Region  drop - down menu at the bottom of the page. 
3. Click  Contact Us  on the left side of the page.
4. Select the appropriate service or support link based on your need.
5.  Choose the method of contacting Dell that is convenient for you.  
						

							Back to Contents Page    
Setting Up Your Monitor   
IN1930/IN2030M  monitor   
 
1. Go to  http://support.dell.com , enter your service tag, and download the latest driver for your graphics card.   
2. After installing the drivers for your graphics adapter, attempt to set the resolution to 1366 x 768 (for IN1930) or 1600 x 900 (for IN2030M) again.  
Back to Contents Page    NOTE:  If you are unable to set the resolution to 1366 x 768 (for IN1930yfRU[IRU,10\f, please contact Dell™ to inquire about a graphics 
adapter that supports these resolutions.    
						

							Back to Contents Page    
Setting Up Your Monitor   
IN1930/IN2030M  monitor   
 
In Windows XP:  
1. Right - click on the desktop and click  Properties .  
2. Select the  Settings  tab.  
3.  Select  Advanced .  
4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).   
5. Please refer to the graphics card provider website for updated driver (for example,  http://www.ATI.com  OR  http://www.NVIDIA.com  ).  
6. After installing the drivers for your Graphics Adapter, attempt to set the resolution to  1366 x 768  (for IN1930) or  1600 x 900  (for IN2030M) again.  
In Windows Vista ®  or Windows 7:  
1. Right - click on the desktop and click  Personalization .  
2. Click  Change Display Settings .  
3. Click  Advanced Settings .  
4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).   
5. Please refer to the graphics card provider website for updated driver (for example,  http://www.ATI.com  OR  http://www.NVIDIA.com  ).  
6. After installing the drivers for your Graphics Adapter, attempt to set the resolution to  1366 x 768  (for IN1930) or  1600 x 900  (for IN2030M) again.  
   
Back to Contents Page  NOTE:  If you are unable to set the resolution to 1366 x 768 (for IN1930) or 1600 x 900 (for IN2030M), please contact the manufacturer of your computer 
or consider purchasing a graphics adapter that will support the video resolution of 1366 x 768 (for IN1930yfRU[IRU,10\f.      
						

							Back to Contents Page    
 
Operating the Monitor   
IN1930/IN2030M  Monitor Users Guide  
   Using the Front Panel Controls  
   Using the On - Screen Display (OSD) Menu  
   Setting the Maximum Resolution  
   Using the Dell Soundbar (Optional)  
   Using the Tilt  
    
Power On the Monitor  
Press the   button to turn on the monitor.  
    
   
Using the Front Panel Controls  
Use the keys on the front of the monitor to adjust the image settings.   
             
Front panel Key Description  
A  
Preset modes    
Use the Preset modes key to choose from a list of preset color modes. See  Using the OSD Menu .  
B  
Brightness / Contrast  Use the Brightness / Contrast key to direct access to the Brightness and Contrast control menu.
C  
Menu    
Use the Menu key to open the on - screen display (OSD).  
D   
Exit    
Use the Exit key to exit on - screen display (OSD) from menu and sub - menus.    
						

							Front panel Key  
Use the keys  on the front of the monitor to adjust the image settings.   
             
Using the On - Screen Display (OSD) Menu  
Accessing the Menu System  Front panel Key Description  
A  
Up  Use the Up key to adjust (increase ranges) items in the OSD menu.
B  
Down  Use the Down key to adjust (decrease ranges) items in the OSD menu.
C   
OK    
Use the OK key to confirm your selection.  
D  
Back     
Use the Back key to go back to the previous menu.   
  NOTE:   If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The 
changes are also saved if you change the settings and then wait for the OSD menu to disappear.
1.  
Press the   button to open the OSD menu and display the main menu.   
  Main Menu   
						

							The table below provides a list of all the OSD menu options and their functions.   
 
 
2.  
Press the   and   buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted.   
3.  
To select the highlighted item on the menu press the   button again.   
4.  
Press the   and   buttons to select the desired parameter.   
5.  
Press the   button to enter the slide bar and then use the   or   buttons, according to the indicators on the menu, to make your changes.   
6.  
Select the   to return to previous menu without accepting current settings or   to accept and return to previous menu.   
Icon   Menu and Submenus Description
Energy Use   This meter shows the energy level being consumed by the monitor in real time.   
  BRIGHTNESS/CONTRAST   Use the Brightness and Contrast menu to adjust the Brightness/Contrast.     
						

							   
 
Brightness Allows you to adjust the brightness or luminance of the backlight. 
   
Press the    key to increase brightness and press the   key to decrease brightness (min 0 ~ max 100). 
 
Contrast   Allows you to adjust the contrast or the degree of difference between darkness and lightness on the monitor screen. Adjust brightness first, 
and adjust contrast only if you need further adjustment.   
Press the   key to increase contrast and press the   key to decrease contrast (min 0 ~ max 100).     
						

							  Auto Adjust    Use this key to activate automatic setup and adjust menu. The following dialog appears on a black screen as the monitor self
current input:   
   
 
 
    Auto Adjustment allows the monitor to self - adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monitor 
by using the Pixel Clock (Coarse) and Phase (Fine) controls under Image Settings.  
 
    NOTE:   Auto Adjust does not occur if you press the button while there are no active video input signals or attached cables .    
						

							Input Source  (for IN2030M 
only)   Use the  Input Source  menu to select between different video signals that may be connected to your monitor.    
Auto Select Select Auto Select to scan for available input signals.
VGA
Select VGA input when you are using the analog (VGA) connector. Push   to select the VGA input source.
DVI - D
Select DVI - D input when you are using the Digital (DVI) connector. Push  to select the DVI input source.
  COLOR SETTINGS   Use the  Color Setting  menu to adjust the monitor's color settings.  
 
     
						

							 
Input Color Format   Allows you to set the video input mode to :   
l RGB : Select this option if your monitor is connected to a computer or DVD player using the HDMI cable or the HDMI to DVI adapter
l YPbPr : Select this option if your DVD player supports only YPbPr output .   
 
Preset Modes   Allows you to choose from a list of preset color modes.