Dell In2030m Users Guide

IN1930/IN2030M  Monitor Users Guide  
Notes, Cautions, Warnings  
   
   
   
Information in this document is subject to change without notice.  
 
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.   is strictly forbidden.  
Trademarks used in this text:  Dell  and the  DELL  logo are trademarks of Dell Inc.;   Microsoft  and  Windows  are either trademarks or registered trademarks of Microsoft Corporation in 
the United States and/or other countries....

Back to Contents Page    
About Your Monitor   
 
   Package Contents    
   Product Features    
   Identifying Parts and Controls    
   Monitor Specifications    
   Plug and Play Capability    
   LCD Monitor Quality & Pixel Policy    
   Maintenance Guidelines    
Package Contents    
Your monitor ships with all the components shown below. Ensure that you have received all the components and  Contact Dell™  if anything is missing.   
   
  NOTE:  Some items may be optional and may not ship with your...

   
Product Features   
The  flat panel display has an active matrix, Thin - Film Transistor, Liquid Crystal Display. The monitors features include:   
■   IN1930:   47.0 cm  (18.5 inches)  viewable area display. 1366 x 768 resolution, plus full - screen support for lower resolutions.  
■   IN2030M:   50.8 cm (20.0 inches)  viewable area display. 1600 x 900 resolution, plus full - screen support for lower resolutions.  
■  Tilt adjustment capability.  
■  Removable pedestal and Video Electronics...

   
   
Side View  
   
Bottom View  
 Label Description Use
1    Barcode serial number label    Refer to this label if you need to contact Dell for technical support.
2    Regulatory rating label    Lists the regulatory approvals.  
3 VESA mounting holes (100 mm)  T o mount the monitor.
4 Security lock slot  Use a security lock with the slot to help secure your monitor.  
5 Dell soundbar mounting brackets To attach the optional Dell Soundbar.
 
Right Side     
IN1930:   IN2030M:...

   
Monitor Specifications  
The following sections give you information about the various power management modes and pin assignments for the various connectors of your monitor.   
Power Management Modes  
If you have VESAs DPM compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use. This is referred to as 
from keyboard, mouse, or other input devices, the monitor automatically resumes functioning. The following table shows the...

15 - pin D - Sub connector  
 
 
 Pin Number   Monitor Side of the 15 - pin Side Signal Cable  
1   Video - Red  
2   Video - Green  
3   Video - Blue  
4   GND  
5   Self - test   
6   GND - R  
7   GND - G  
8   GND - B  
9   DDC +5 V   
10   GND - sync  
11   GND  
12   DDC data  
13   H - sync  
14   V - sync  
15   DDC clock  
Pin 
Number 24 - pin Side of th e C onnected  Signal 
Cable
1 TMDS RX2 -
2 TMDS RX2+
3 TMDS Ground
4 Floating
5 Floating
6 DDC Clock
7 DDC Data
8 Floating
9 TMDS RX1 -
10 TMDS...

Plug and Play Capability  
You can install the monitor in any Plug and Play compatible system. The monitor automatically provides the computer with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so that the 
system can configure itself and optimize the monitor settings. Most monitor installations are automatic. You can select different settings if required.   22 TMDS Ground
23 TMDS Clock+
24 TMDS Clock -
Flat Panel Specifications  
* Based on estimation.  
**...

Inrush current 120 V: 30 A (Max.)  
240 V: 60 A (Max.) 
Preset Display Modes  
The following table lists the preset modes for which Dell guarantees image size and centering:    
 
IN2030M:  Display Mode     Horizontal Frequency 
(kHz)     Vertical Frequency 
(Hz)     Pixel Clock (MHz)     Sync Polarity 
(Horizontal/Vertical)    
VESA, 720 x 400    31.5    70.0   28.3    - /+   
VESA, 640 x 480    31.5    60.0   25.2    - / -    
VESA, 640 x 480    37.5    75.0    31.5    - / -    
VESA, 800 x 600    37.9...

LCD Monitor Quality & Pixel Policy   
During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is a fixed pixel that appears as an extremely tiny dark or bright discolored 
spot.When the pixel remains permanently lit, it is known as a  “ bright dot. ”   When the pixel remains black, it is known as a  “ dark dot. ”  
In almost every case, these fixed pixels are hard to see and do not detract from display quality or...

   Back to Contents Page