Dell G2410h Users Guide

							Saturation  
T his feature can adjust the color saturation of the video image. Use   or   to adjust the saturation from 0 to 100.  
Press   to increase the monochrome appearance of the video image  
Press   to increase the colorful appearance of the video image  
 
NOTE:   Saturation adjustment is available only for video input.
Color Reset  
Resets your monitors color settings to the factory defaults.  
Exit Menu  
Press    to exit the OSD main menu.
DISPLAY  
SETTINGS    
Display 
s ubmenu  Display Setting submenu for VGA input    
 
Display Setting submenu for DVI - D input    
 
   
						

							  
Back  
Press   to go back to the main menu.
  
Horizontal Po
sition   Use the   and   buttons to adjust image left and right. Minimum is 0 ( - ). Maximum is 100 (+).  
NOTE:   When using a DVI source, the Horizontal Position setting is not available.  
  
Vertical Posit
ion   Use the   and   buttons to adjust image up and down. Minimum is 0 ( - ). Maximum is 100 (+).  
NOTE:   When using a DVI source, the Vertical Position setting is not available.  
  
Sharpness  
This feature can make the image look sharper or softer. Use   or   to adjust the sharpness from 0 to 100.
  
Pixel Clock  
T he Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference.   
Use  the    and    buttons to adjust  for best image quality.  
  
Phase   If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarseyfDGMXVWPHQWDQGWKHQXVH3KDVHILQH\f, again.   
   
NOTE:   Pixel Clock and Phase Adjustments are only available for VGA input.   
 
Dynamic  
Contrast   The Dynamic Contrast adjustment helps the user to get a higher contrast if you choose Game preset, Movie Preset, Sports Preset and Nature Preset. 
(Brightness control is disabled while in Dynamic Contrast mode and will be grayed out.)  
Use the   button to enable the Dynamic Contrast adjustment.   
Use the   button to disable the Dynamic Contrast adjustment.
NOTE:   Dynamic Contrast is not available (greyed out) in Energy Smart Plus and Energy Smart modes.   
  
Display  Reset   Reset the image to the original factory setting.
  
Exit Menu  
Press    to exit the OSD main menu.
OTHER 
SETTINGS   
  
    
						

							  
  
   
 
  
Back  
Press   to go back to the main menu.
  
Language   Language option to set the OSD display to one of seven languages (English, Espanol, Francais, Deutsch, Brazilian Portuguese, Japanese, or Simplified 
Chinese).
Menu 
Transparency   This function is used to change the OSD background from opaque to transparent.  
  
Menu Timer   OSD Hold Time: Sets the length of time the OSD will remain active after the last time you pressed a button.  
Use the   and    buttons to adjust the slider in 1 second increments, from 5 to 60 seconds.    
  
Menu Lock  
Controls user access to adjustments. When Lock is selected, no user adjustments are allowed. All buttons are locked except   E
   
NOTE: When the OSD is locked, pressing the menu button will take the user directly to the OSD settings menu, with OSD Lock pre - selected on entry. Press 
and hold    E   button for 15 seconds to unlock and allow user access to all applicable settings.   
  
DDC/CI     DDC/CI (Display Data Channel/Command Interface) allows your monitor parameters (brightness, color balance etc) to be adjustable using software on your 
computer. You can disable this feature by selecting Disable.  
   
You can disable this feature by selecting Disable. The following warning message appears:  
Select Yes to disable DDC/CI and No to exit with out making changes.  
 NOTE:   For best user experience and optimum performance of your monitor, keep this feature enabled.      
						

							  
LCD 
Conditioning This feature will help reduce minor cases of image retention.  
 
If an image appears to be stuck on the monitor, select  LCD Conditioning  to help eliminate any image retention. Using the LCD Conditioning feature may take 
some time. LCD Conditioning feature cannot remove  severe cases of image retention or burn - in.
   
The below warning message appears once user selects  “ Enable LCD Conditioning.  
 
    NOTE:   Use LCD Conditioning only when you experience a problem with image retention.   
NOTE:   Press any button on the monitor to terminate LCD Conditioning at any time.   
  
Factory Rese
t   Reset all OSD settings to the factory preset values.  
 
 
Exit Menu  
Press    to exit the OSD main menu.  
						

							Personalize
   
   
						

							Back to Contents Page   
Setting Up Your Monitor   
 
Setting the display resolution to 1680x1050 (for G2210) or 1920X1080 (for G2410) 
(maximum)  
For maximum display performance while using the Microsoft Windows operating systems, set the display resolution to 1680x1050 (for G2210) or 1920X1080 
(for G2410) pixels by performing the following steps:  
1. Right - click on the desktop and click  Properties .  
2. Select the  Settings  tab.  
3. Move the slider - bar to the right by pressing and holding left - mouse button and adjust the screen resolution to  1680x1050 (for G2210) or 1920X1080 
(for G2410) .  
4. Click  OK .  
    If you do not see  1680x1050  (for G2210) or  1920X1080  (for G2410) as an option, you may need to update your graphics driver. Please choose the 
scenario below that best describes the computer system you are using, and follow the provided directions:  
1:   
2:   
Back to Contents Page     
						

							 
Information in this document is subject to change without notice.  
 
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.   is strictly forbidden.  
Trademarks used in this text:  DELL  and the  DELL  log o  are trademarks of Dell Inc;  Microsoft  and  Windows  are either trademarks or registered trademarks of Microsoft Corporation in 
the United States and/or other countries;  Adobe  is a trademark of Adobe Systems Incorporated, which may be registered in certain jurisdictions.  ENERGY STAR  is a registered 
trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy 
efficiency.  
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any 
proprietary interest in trademarks and trade names other than its own.  
Model G2210t/G2410t.   
 
February 2009 Rev. A02   User Guide  
 
Setting the display resolution to 1680x1050 (for G2210) or 1920X1080 (for G2410)(maximum)    
						

							Back to Contents Page    
 
Setting Up the Monitor   
 
   Attaching the Stand  
   Connecting the Monitor  
   Organizing the Cables  
   Attaching the Soundbar (Optional)  
   Removing the Stand    
   Wall Mounting (Optional)    
Attaching the Stand  
   
Remove the monitor cover and place the monitor on it.  
1. Fit the two tabs on the upper part of the stand to the groove on the back of the monitor.   
2. Lower the stand so that the monitor mounting area snaps onto the stand.    
Connecting Your Monitor  
To connect your monitor to the computer:  
1. Turn off your computer and disconnect the power cable.   
2. Connect either the white (digital DVI - D) or the blue (analog VGA) display connector cable to the corresponding video port on the back of your 
computer. Do not connect both cables on the same computer.  Use both the  cables only when they are connected to two different computers with 
appropriate video systems.   
Connecting the White DVI Cable  NOTE:  The stand is detached from monitor when it is shipped from the factory.
 
 CAUTION:  Before you begin any of the procedures in this section, follow the  Safety Instructions .    
						

							 
Connecting the Blue VGA Cable  
 
   
Organizing the Cables  
 
After attaching all necessary cables to your monitor and computer, (See  Connecting Your Monitor  for cable attachment,) use the cable management slot 
to organize all cables as shown above.  
Attaching the Soundbar (Optional)  CAUTION:  The graphics are used for the purpose of illustration only. Appearance of the computer may vary.  
						

							 
 
Removing the Stand  
To remove the stand:  
    NOTICE:  Do not use with any device other than Dell Soundbar. 
1. Working from the rear of the monitor, attach the Dell Soundbar by aligning the two slots with the two tabs along the bottom rear of the monitor.
2.   Slide the Dell Soundbar to the left until it snaps into place.
Connect the Soundbar with the power brick.
Plug the power cables of the power brick into a nearby outlet. 
Insert the lime - green mini stereo plug from the rear of the Soundbar into the computers audio output jack. 
NOTE:   To prevent scratches on the LCD screen while removing the stand,   ensure that the monitor is placed on a clean surface.