Dell G2410 Users Guide

Back to Contents Page    
Help on PowerNap Installation  
To install PowerNap succesfully, follow these steps: -  
Back to Contents Page   Windows XP, Windows Vista , Windows 7
2. Install Entech API Install
Install  

Back to Contents Page    
Setting Up Your Monitor   
 
 
1. Go to  http://support.dell.com ,  enter your service tag, and download the latest driver for your graphics card.   
2. After installing the drivers for your Graphics Adapter, attempt to set the resolution to  1920 X 1080  again.  
Back to Contents Page  NOTE:  If you are unable to set the resolution to 1920 X 1080, please contact Dell™ to inquire about a Graphics Adapter that supports these resolutions.    

Back to Contents Page    
Setting Up Your Monitor   
 
 
In Windows XP ®
:  
1. Right - click on the desktop and click  Properties .  
2. Select the  Settings  tab.  
3. Select  Advanced .  
4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).   
5. Refer to the graphic card provider website for updated driver (for example,  http://www.ATI.com  OR  http://www.NVIDIA.com  ).  
6. After installing the drivers for your Graphics Adapter,...

Back to Contents Page    
 
Operating the Monitor   
 
   Using the Front Panel Controls  
   Using the On - Screen Display (OSD) Menu  
   PowerNap Software  
   Setting the Maximum Resolution  
   Using the Dell Soundbar (Optional)  
   Using the Tilt, Swivel, and Vertical Extension  
Using the Front Panel Controls  
Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls, 
an OSD shows the numeric...

Using the On - Screen Display (OSD) Menu  
 
Accessing the Menu System  
Main Menu for Analog (VGA) Input  
 
or  
Main Menu for Digital (DVI - D) Input  
 
    NOTE:   If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The 
changes are also saved if you change the settings and then wait for the OSD menu to disappear.
1.   Press the MENU button to launch the OSD menu and display the main menu.  
NOTE:  AUTO ADJUST is...

      
 
Back  
Press   to go back to the main menu.
Brightness   Brightness adjusts the luminance of the backlight.   
Press the    button to increase brightness and Press the   button to decrease brightness (min 0 ~ max 100).   
   
NOTE: Brightness control is not adjustable in  Energy Smart Plus    and  Energy Smart  mode.  
Below message will appear if user attempts to adjust the brightness.
 
NOTE: Brightness control will be greyed out during Screen dim in PowerNap option when screen saver is...

Contrast Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary.  
Press the   button to increase contrast  and  Press the   button to decrease contrast (min 0 ~ max 100).   
The Contrast function adjusts the degree of difference between darkness and lightness on the monitor screen.  
Exit Menu  
Press    to exit the OSD main menu.
   
    AUTO 
ADJUST   Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display...

  
 
Back  
Press   to go back to the main menu.
VGA  
Select VGA input when you are using the analog (VGA) connector. Press   to select the VGA input source.
DVI - D
Select DVI - D input when you are using the Digital (DVI) connector. Press   to select the DVI input source.
  
Scan for 
Sources   Select Auto Select to scan for available input signals.
  
Exit Menu  
Press    to exit the OSD main menu.
Color 
Settings Use the Color Settings to adjust the color setting mode and color temperature.  
There...

Back  
Press   to go back to the main menu.
Input Color 
Format Allows you to set the video input mode to.   
l RGB : Select this option if your monitor is connected to a computer or DVD player using the VGA and DVI cable or the HDMI to DVI adapter. 
l YPbPr : Select this option if your DVD player supports only YPbPr output.   
Mode 
Selection Allows you to set the display mode to:   
l Graphics : Select this mode if your monitor is connected to your computer.   
l Video : Select this mode if your...

Saturation  
T his feature can adjust the color saturation of the video image. Use   or   to adjust the saturation from 0 to 100.  
Press   to increase the monochrome appearance of the video image  
Press   to increase the colorful appearance of the video image  
 
NOTE:   Saturation adjustment is available only for video input.
Color Reset  
Resets your monitors color settings to the factory defaults.  
Exit Menu  
Press    to exit the OSD main menu.
DISPLAY  
SETTINGS    
Display 
s ubmenu  Display...