Dell G2410 Users Guide

 
Notes, Notices, and Cautions  
   
   
   
 
Information in this document is subject to change without notice.  
 
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.   is strictly forbidden.  
Trademarks used in this text:  DELL  and the  DELL  log o  are trademarks of Dell Inc;  Microsoft  and  Windows  are either trademarks or registered trademarks of Microsoft Corporation in 
the United States and/or other countries;  Adobe  is a trademark of Adobe...

Back to Contents Page    
 
About Your Monitor   
 
Package Contents    
Your monitor ships with the components shown below. Ensure that you have received all the components and  contact Dell  if something is missing.  
     
Product Features  
The   flat panel display has an active matrix, thin - film transistor (TFT), liquid crystal display (LCD), and LED backlight. The monitor features Package Contents
Product Features
Identifying Parts and Controls
Monitor Specifications
Plug and Play Capability...

include:  
 
■  24 - inch (609.70 mm) viewable area display. 1920 x 1080 resolution, plus full - screen support for lower resolutions.  
■  Wide viewing angle to allow viewing from a sitting or standing position, or moving side - to - side.   
■  Tilt, swivel and vertical extension adjustment capability.  
 
■  Plug and play capability if supported by your system.   
 
■  On - Screen Display (OSD) adjustments for ease of set - up and screen optimization.   
 
■  Software and documentation media includes...

Back View  
 
Side View  
 
       2 Shortcut Key 1 / Up button
3 Shortcut Key 2 / Down button
4 OSD menu button / OK button
5 Back / Exit  button  
6 Power button  (with power light indicator)
Back view   Back view with monitor stand  
Label Description/Use
1 VESA ®
  mounting holes (100 mm)  
(behind attached VESA plate)   U se to mount the monitor.  
2 Barcode serial number label Refer to this label if you need to contact Dell for technical support.
3 Security lock slot Use a security lock with the...

Bottom View    
Monitor Specifications  
Flat Panel Specifications  
*   G2410H color gamut (typical) is based on CIE1976 (80%) and CIE1931 (68%) test standards.  
Resolution  Specifications  
Video Supported Modes  Bottom view  
Label Description
1 AC power cord connector
2 DVI connector
3 VGA connector
Model G2410H
Screen type Active matrix  -  TFT LCD
Panel type  TN
Screen dimensions 24 inches (24 - inch viewable image size)
Preset display area:  
Horizontal 531.36 mm (20.92 inches)
Vertical 298.89 mm...

Preset Display Modes  
Electrical  Specifications  
Physical  Characteristics  Model G2410H
Video display capabilities (DVI playback) 480i/480p/576i/576p/720p/1080i/1080p (Support HDCP)  
Display Mode   Horizontal Frequency 
(kHz)   Vertical Frequency 
(Hz)   Pixel Clock 
(MHz)   Sync Polarity 
(Horizontal/Vertical)  
720 x 400 31.47   70.0   28.3   - /+  
640 x 480  31.47   60.0   25.1   - / -  
640 x 480 37.5   75.0   31.5   - / -  
800 x 600 37.88   60.0   40.0   +/+  
800 x 600 46.88   75.0   49.5...

Environmental  Characteristics  
Power Management Modes  
If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in 
use. This is referred to as  Power Save Mode *. If the computer detects input from keyboard, mouse, or other input devices, the monitor automatically resumes 
functioning. The following table shows the power consumption and signaling of this automatic power saving feature:   
^^Based on...

 
 
 Pin 
Number 15 - pin Side of the Co nnected Signal Cable
1 Video - Red  
2 Video - Green
3 Video - Blue
4 GND
5 Self - test
6 GND - R
7 GND - G
8 GND - B
9 Computer 5V/3.3V
10 GND - sync
11 GND
12 DDC data
13 H - sync
14 V - sync
15 DDC clock
Pin 
Number 24 - pin Side of th e C o nnected  Signal Cable
1 TMDS RX2 -
2 TMDS RX2+
3 TMDS Ground
4 Floating
5 Floating
6 DDC Clock
7 DDC Data
8 Floating
9 TMDS RX1 -
10 TMDS RX1+
11 TMDS Ground
12 Floating
13 Floating
14 +5V/+3.3V power
15 Self test 
16 Hot...

Plug and Play Capability  
You can install the monitor in any Plug and Play - compatible system. The monitor automatically provides the computer system with its Extended Display 
Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor 
installations are automatic; you can select different settings if desired. For more information about changing the monitor settings, see  Operating the Monitor ....

Back to Contents Page    
 
Appendix   
 
  Safety Instructions  
  FCC Notice (U.S. Only) and Other Regulatory Information   
  Contacting Dell  
   
CAUTION: Safety Instructions  
For information on safety instructions, see the  Product Information Guide .   
FCC Notices (U.S. Only) and Other Regulatory Information  
For FCC notices and other regulatory information, see the regulatory compliance website located at: http://www.dell.com/regulatory_compliance.  
Contacting Dell  
For customers in the...