Home > Dell > Notebook > Dell E6530 Service Manual

Dell E6530 Service Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Dell E6530 Service Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Back to Contents Page    
    SD Card Board  
     
    Removing the SD Card Board  
       
    1. Follow the procedures in  Before Working Inside Your Computer .   
    2. Remove the  battery  
    3. Remove the  access panel .  
    4. Remove the  optical drive .   
    5. Remove the  keyboard .   
    6. Remove the  hinge covers .   
    7. Remove the  SD card .   
    8. Remove the  display assembly .   
    9. Remove the  palm rest assembly .   
    10. Release the cable tab and disconnect the SD card data cable from the system board. 
       
    11. Remove the screw that secures the SD card board to the computer. 
       
    12. Lift the SD card board up and away from the computer.   
    Replacing the SD Card Board  
    To replace the SD card board, perform the above steps in reverse order.  
    Back to Contents Page    
       
        WARNING:  Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 
    practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 
    NOTE:   You may need to install Adobe™ Flash Player™ from  Adobe.com  in order to view the illustrations below.    
    						
    							Back to Contents Page    
    Secure Digital (SD) Card  
     
    Removing the SD Card  
       
        
    1. Press in on the SD card and release it from the computer.   
       
    2. Slide the SD card out of the computer.   
       
    Replacing the SD Card  
    To replace the SD card, perform the above steps in reverse order.  
    Back to Contents Page    
       
        WARNING:  Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 
    practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 
    NOTE:   You may need to install Adobe™ Flash Player™ from  Adobe.com  in order to view the illustrations below.    
    						
    							Back to Contents Page    
    Subscriber Identity Module (SIM) Card  
     
    Removing the SIM Card  
       
        
    1. Follow the procedures in  Before Working Inside Your Computer .  
    2. Remove the  battery .   
    3. Press the SIM card in to release it from the computer. 
       
    4. Slide the SIM card out of the computer. 
       
    Replacing the SIM Card  
    To replace the SIM card, perform the above steps in reverse order.  
    Back to Contents Page    
       
        WARNING:  Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 
    practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 
    NOTE:   You may need to install Adobe™ Flash Player™ from  Adobe.com  in order to view the illustrations below.    
    						
    							Back to Contents Page    
    Smart Card  
     
    Removing the Smart Card  
    1. Follow the procedures in  Before Working Inside Your Computer .   
    2. Slide the Smart Card out of the computer. 
       
    Replacing the Smart Card  
    To replace the Smart Card, perform the above steps in reverse order.  
    Back to Contents Page    
       
        WARNING:  Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 
    practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 
     
    NOTE:   You may need to install Adobe™ Flash Player™ from  Adobe.com  in order to view the illustrations below.    
    						
    							Back to Contents Page    
     Specifications   
     
       
         System Information    Fingerprint Reader (Optional)
       Processor    Ports and Connectors
       Memory    Drives
       Video     Display
       Audio    Keyboard
       Communications    Touchpad
       ExpressCard    Battery
       PC Card    AC Adapter
       Secure Digital (SD) Memory Card Reader    Physical
       Contactless Smart Cards (Optional)    Environmental
      NOTE:  Offerings may vary by region. For more information regarding the configuration of your computer, click Start ®   Help and Support and select the 
    option to view information about your computer. 
     
    Chipset  
    Mobile Intel ®
      5 series chipset (QM57)  
    Data bus width   64 bits  
    DRAM bus width   dual - channel 64 bits  
       
    NOTE:  You must install memory in pairs for the 
    dual channel mode to work.  
    Flash EPROM   SPI 32 Mbits  
    PCI bus   32 bits, 33 MHz  
     
    Types   Intel Core™ i5 series  
    Intel Core i7 series  
    L2 cache   Intel Core i5 - 520M/540M Dual Core  —   3 MB  
    Intel Core i7 - 620M Dual Core  —   4 MB  
    Intel Core i7 - 720QM Quad Core  —   6 MB  
    Intel Core i7 - 820QM Quad Core  —   8 MB  
    External bus frequency   1333 MHz  
     
    Type   DDR3 SDRAM  
    Speed   1066 MHz or 1333 MHz  
       
    NOTE:  Intel Core i5 and i7 dual core and Intel Core i7 
    quad core processors shipped with your computer 
    support both 1066 MHz and 1333 MHz memory 
    modules. However, the dual core processors will 
    operate at 1066 MHz only.  
    Connectors   two SODIMM connectors  
    Module capacities   1 GB, 2 GB, 4 GB  
    Minimum memory   1 GB  
    Maximum memory   8 GB  
       
    NOTE:  Only 64 - bit operating systems can detect 
    memory capacities greater than 4 GB.  
    Video   
    Type   UMA integrated on system board  
    discrete video controller  
    Data bus   PCI - Express 16 Gen1 (for 620M, 540M, or 520M 
    processors)  
    PCI - Express 16 Gen2 (for 920XM, 820QM, or 720QM 
    processors)  
    Controller      
    UMA   Intel Graphics Media Accelerator HD    
    						
    							Discrete   NVIDIA Quadro NVS 3100M  
    Output   15 - pin VGA connector  
    20 - pin DisplayPort connector  
     
    Type   two - channel high - definition audio codec (HDA)  
    Controller   IDT 92HD81B  
    Speaker   two   
    Internal speaker amplifier   2 W channel  
    Volume controls   volume up, volume down, and mute buttons  
     
    Modem   internal (optional)  
    Network adapter   10/100/1000 Mbps Intel 82577LM Gigabit Ethernet 
    Controller   
    Wireless   dedicated WLAN, WWAN, WiMAX, and Bluetooth ® 
    wireless support if optional cards are purchased.  
    GPS   mobile broadband mini - card  
    ExpressCard  
       
    NOTE:  The ExpressCard slot does NOT support PC Cards.  
    ExpressCard connector   ExpressCard slot  
    Cards supported   34 mm ExpressCards  
    PC Card  
       
    NOTE:  The PC card slot does NOT support Express Cards.  
    PC card connector   PC Card slot  
    Cards supported   54 mm PC cards  
    Secure Digital (SD) Memory Card Reader  
    Cards supported   SD / MMC / SDHC / SDHS / MiniSD / MicroSD / SDIO  
    Contactless Smart Cards (Optional)  
    Supported Smart Cards and Technologies   ISO14443A  —   106 kbps, 212 kbps, 424 kbps, and 
    848 kbps  
    ISO14443B  —   106 kbps, 212 kbps, 424 kbps, and 
    848 kbps  
    ISO15693  
    HID iClass  
    FIPS201  
    NXP Desfire  
    Fingerprint Reader (Optional)  
    Type   swipe fingerprint sensor, FIPS 140 - 2 / FIPS 201  
     
    Audio   microphone connector, stereo   
    headphone/ speakers connector  
    Video   one 15 - pin VGA connector  
    one dual - mode DisplayPort connector  
    Network adapter   one RJ - 45 connector  
    Modem   one RJ - 11 connector  
    IEEE 1394   one 4 - pin connector  
    USB   three USB 2.0 - compliant connectors  
    one eSATA/USB 2.0 - compliant connector  
    Memory card reader   one 6 - in - 1 memory card reader  
    Smart card reader   integrated smart card reader  
    Mini - Card   two half - height mini - card slots  
    one full - height mini - card slot  
    Docking connector   one E - Family 144 – pin docking connector  
    Drives  
    Hard drive   SATA 2 HDD  
    SATA 2 Mobile HDD    
    						
    							Optical drives   DVD  
    DVD+/ - RW  
    Blu - ray™  
     
    Type and size   396.24 mm (15.6 inches) diagonal TFT with white LED 
    backlight  
    Active area (X/Y)   344.2 mm x 193.5 mm  
    (13.55 inches x 7.61 inches)  
    Dimensions  
    Height   210 mm (8.26 inches)  
    Width   360 mm (14.17 inches)  
    Diagonal   417 mm (16.14 inches)  
    Display Option 1: High Definition      
    Maximum resolution   1366 (H) x 768 (V) at 262K colors  
    Typical brightness   220 nits  
    Refresh rate   60 Hz  
    Viewing angle      
           Horizontal   40 degrees/40 degrees  
           Vertical   15 degrees/30 degrees  
    Pixel pitch   0.250 mm x 0.250 mm\  
    Display Option 2: High Definition+Wide View Anti - Glare   
    Maximum resolution   1600 (H) x 900 (V) at 262K colors  
    Typical brightness   250 nits  
    Refresh rate   60 Hz  
    View angle      
           Horizontal   55 degrees/55 degrees  
           Vertical   45 degrees/45 degrees  
    Pixel pitch   0.216 mm x 0.216 mm  
    Display Option 3: Full High Definition  
    Maximum resolution   1920 (H) x 1080 (V) at 262K colors   
    Maximum brightness   300 nits  
    Refresh rate   60 Hz  
    Viewing angles  
           Horizontal   55 degrees/55 degrees  
           Vertical   45 degrees/45 degrees  
    Pixel pitch   0.179 mm x 0.179 mm  
     
    Number of keys   United States: 83 keys  
    Europe: 84 keys  
    Japan: 87 keys  
    Layout   QWERTY/AZERTY/Kanji  
    Backlit keyboard   yes  
     
    Active area      
    X - axis   80 mm (3.14 inches)  
    Y - axis   45 mm (1.77 inches)  
     
    Type   4 - cell smart lithium ion (37 WHr)  
    6 - cell smart lithium ion (60 WHr)  
    3 - year life - time 9 - cell "smart" lithium ion (81 WHryf  
    9 - cell smart lithium ion (90 WHr)  
    12 - cell smart lithium ion (88 WHr)  
    Charge time with computer off   4 - , 6 - , 9 - cell  —   approximately 1 hour to 80% capacity 
    and 2 hours to 100% capacity.  
    12 cell  —   approximately 3 hours 20 minutes to 100% 
    capacity.  
    Operating time   battery operating time varies depending on operating 
    conditions and can significantly reduce under certain 
    power - intensive conditions.  
    Life span   approximately 300 charge/discharge cycles  
    Dimensions        
    						
    							Depth      
           4 - cell/6 - cell   206.00 mm (8.11 inches)  
           9 - cell   208.00 mm (8.18 inches)  
           12 - cell   14.48 mm (0.57 inch)  
    Height      
           4 - cell/6 - cell   19.81 mm (0.78 inch)  
           9 - cell   22.30 mm (0.87 inch)  
           12 - cell   217.17 mm (8.55 inches)  
    Width      
           4 - cell/6 - cell   47.00 mm (1.85 inches)  
           9 - cell   69.00 mm (2.71 inches)  
           12 - cell   322.07 mm (12.68 inches)  
    Weight      
           4 - cell   237.00 g (0.52 lb)  
           6 - cell   329.00 g (0.72 lb)  
           9 - cell   485.00 g (1.06 lb)  
           12 - cell   848.22 g (1.87 lb)  
    Voltage   11.10 VDC or 14.8 VDC  
    Temperature range      
    Operating   0 °C to 35 °C (32 °F to 95 °Fyf  
    Storage   – 40 °C to 65 °C ( – 40 °F to 149 °Fyf  
    Coin - cell battery   3 V CR2032 lithium coin cell  
     
    Input voltage   100 V – 240 V~  
    Input current (maximum)   1.50 A / 2.50 A  
    Input frequency   50 Hz – 60 Hz  
    Output power   90 W  
    Output current   5.62 A (maximum at 4 - second pulse)  
    4.62 A (continuous)  
    Dimensions  
    Depth   16.00 mm (0.64 inch)  
    Height   70.10 mm (2.76 inches)  
    Width   147.00 mm (5.78 inches)  
    Temperature range      
    Operating   0 °C to 35 °C (32 °F to 95 °Fyf  
    Storage   – 40 °C to 65 °C ( – 40 °F to 149 °Fyf  
     
    Depth    253.30 mm (9.97 inches)  
    Height   28.60 mm (1.13 inches)  
    Width   374.30 mm (14.73 inches)  
    Weight   2.51 kg (5.53 lb)  
     
    Temperature range      
    Operating   0 °C to 35 °C (32 °F to 95 °Fyf  
    Non - operating   – 40 °C to ~65 °C ( – 40 °F to ~149 °Fyf  
    Relative humidity (maximum)      
    Operating   10 % to 90 % (noncondensing)  
    Non - operating   5 % to 95 % (noncondensing)  
    Maximum vibration      
    Operating   0.66 Grms (2 Hz – 600 Hz)  
    Non - operating   1.30 Grms (2 Hz – 600 Hz)  
       
    NOTE:  Vibration is measured using a random - vibration spectrum that simulates user environment.  
    Maximum shock      
    Operating   140 G (2 ms)  
    Non - operating   160 G (2 ms)  
         
    						
    							Back to Contents Page  
           
    NOTE:  Shock is measured with hard drive in head - parked position and a 2 - ms half - sine pulse.  
    Altitude      
    Operating   – 15.20 m to 3048 m ( – 50 ft to 10,000 ft)  
    Non - operating   – 15.20 m to 10,668 m ( – 50 ft to 35,000 ft)    
    						
    							Back to Contents Page    
    System Board  
     
    Removing the System Board  
       
    1. Follow the procedures in  Before Working Inside Your Computer .   
    2. Remove the  battery .   
    3. Remove the  subscriber identity module (SIM) card .   
    4. Remove the  optical drive .   
    5. Remove the  keyboard .   
    6. Remove the  coin - cell battery .   
    7. Remove the  hinge covers .   
    8. Remove the  hard drive .   
    9. Remove the  Latitude ON Flash™ card .   
    10. Remove the  wireless wide area network (WWAN) card .   
    11. Remove the  wireless local area network (WLAN) card .   
    12. Remove the  display assembly .   
    13. Remove the  heat sink and fan assembly .   
    14. Remove the  processor .   
    15. Remove the  palm rest assembly .   
    16. Remove the  ExpressCard board .   
    17. Remove the  Bluetooth ®  card .   
    18. Release the cable tab and disconnect the SD media board cable from the system board. 
       
    19. Remove the screws that secure the system board to the chassis. 
       
    20. Disconnect the system board from I/O board, and flip the system board over. 
     s  
    21. Disconnect the DC - in cable from the system board. 
       
    22. Remove the system board from the chassis. 
       
    Replacing the System Board  
    To replace the system board, perform the above steps in reverse order.  
    Back to Contents Page    
       
        WARNING:  Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 
    practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 
    NOTE:   You may need to install Adobe™ Flash Player™ from  Adobe.com  in order to view the illustrations below.    
    						
    All Dell manuals Comments (0)

    Related Manuals for Dell E6530 Service Manual