Dell E2310h Users Guide

Back to Contents Page    
 
Appendix   
E2010H /E2210H/E2310H Flat Panel Monitor Users Guide  
  Safety Instructions  
  FCC Notice (U.S. Only) and Other Regulatory Information   
  Contacting Dell  
    
   
CAUTION: Safety Instructions  
For information on safety instructions, see the  Product Information Guide .   
FCC Notices (U.S. Only) and Other Regulatory Information  
For FCC notices and other regulatory information, see the regulatory compliance website located at  www.dell.com...

Back to Contents Page    
Setting Up Your Monitor   
 
 
1. Go to  http://support.dell.com ,  enter your service tag, and download the latest driver for your graphics card.   
2. After installing the drivers for your Graphics Adapter, attempt to set the resolution to  1600 x 900 (for E2010H) or 1920x1080 (for E2210H/E2310H) 
again.  
Back to Contents Page  NOTE:  If you are unable to set the resolution to 1600 x 900 (for E2010HyfRU[IRU(+(+\f , please contact Dell™ to inquire about a...

Back to Contents Page    
Setting Up Your Monitor   
E2010H/E2210H/E2310H  Flat Panel Monitor   
 
1. Right - click on the desktop and click  Properties .  
2. Select the  Settings  tab.  
3. Select  Advanced .  
4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).   
5. Refer to the graphic card provider website for updated driver (for example,  http://www.ATI.com  OR  http://www.NVIDIA.com  ).  
6. After installing the drivers for...

Back to Contents Page    
 
Operating the Monitor   
E2010H/E2210H/E2310H  Flat Panel Monitor Users Guide  
   Using the Front Panel Controls  
   Using the On - Screen Display (OSD) Menu  
   Setting the Maximum Resolution  
   Using the Dell Soundbar (Optional)  
   Using the Tilt  
    
Power On the Monitor  
Press the   button to turn on the monitor.  
      
Using the Front Panel Controls  
Use the keys on the front of the monitor to adjust the image settings.   
           
Front panel Key...

Using the On - Screen Display (OSD) Menu  
 
Accessing the Menu Syste  
The table below provides a list of all the OSD menu options and their functions.   
1.   Press the   button to open the OSD menu and display the main menu.   
  Main Menu   
2.   Press the    and   buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted.   
3.   To select the highlighted item on the menu press the   button again.   
4.   Press the   button to enter the slide...

Auto 
Adjust    
    Use  this key to activate automatic setup and adjust menu. The following dialog appears on a black screen as the monitor self
 
Auto Adjustment allows the monitor to self - adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monitor by using the Pixel Clock 
(Coarse) and Phase (Fine) controls under Image Settings.    
NOTE:  Auto Adjust does not occur if you press the button while there are no active video input signals or attached cables....

 
   
l Standard : Loads the monitors default color settings. This is the default preset mode.   
l Multimedia : Loads color settings ideal for multimedia applications.   
l Game : Loads color settings ideal for most gaming applications.   
l Warm : Increase the color temperature. The screen appears warmer with a red/yellow tint.   
l Cool : Decreases the color temperature. The screen appears cooler with a blue tint.   
l Custom (RGB) : Allows you to manually adjust the color settings. press the    and...

 
   
 
Back  
Press  to go back to the main menu .   
 
Horizontal Position    
Use the    or   buttons to adjust image left and right. Minimum is 0 ( - ). Maximum is 100 (+).   
 
Vertical Position    
Use the    or   buttons to adjust image up and down. Minimum is 0 ( - ). Maximum is 100 (+)   
 
Sharpness    
This feature can make the image look sharper or softer. Use    or   to adjust the sharpness from 0 to 100  
 
Pisel Clock    
The Phase and Pixel Clock adjustments allow you to adjust your...

Menu Timer   Allows you to set the time for which the OSD remains active after you press a key on the monitor.  
Use the   and   keys to adjust the slider in 1 second increments, from 5 to 60 seconds.   
 
Menu Lock   Controls user access to adjustments. When  Lock  is selected, no user adjustments are allowed.   
NOTE:   When the OSD is locked, press the first OSD control above the Power On/Off control for 15 seconds to unlock it.
 
DDC/CI     DDC/CI (Display Data Channel/Command Interface) allows a...

OSD Warning Messages   
   
 
Back  
Press  to go back to the main menu.   
When the monitor does not support a particular resolution mode you will see the following message:   
E2010H:  
 
E2210H/E2310H:  
 
 
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See  Monitor Specifications  for the 
Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode is  1600 x 900 (for E2010H) or 1920 x 1080 (for 
E2210H/E2310H)....