Dell Drac 5 User Manual
Here you can view all the pages of manual Dell Drac 5 User Manual. The Dell manuals for Server are available online for free. You can easily download all the documents as PDF.
Page 381
DRAC 5 Property Database Group and Object Definitions381 Description When the DRAC 5 cfgSerialConsoleEnable property is set to 0 (disabled), the DRAC 5 serial port becomes the IPMI serial port. This property determines the IPMI defined mode of the serial port. In Basic mode, the port uses binary data with the intent of communicating with an application program on the serial client. In Terminal mode, the port assumes that a dumb ASCII terminal is connected and allows very simple commands to be...
Page 382
382DRAC 5 Property Database Group and Object Definitions cfgIpmiSerialFlowControl (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 0 (None) 1 (CTS/RTS) 2 (XON/XOFF) Default 1 Description Specifies the flow control setting for the IPMI serial port. cfgIpmiSerialHandshakeControl (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 0 (FALSE) 1 (TRUE) Default 1 Description Enables or disables he IPMI terminal...
Page 383
DRAC 5 Property Database Group and Object Definitions383 Default 1 Description Enables or disables line editing on the IPMI serial interface. cfgIpmiSerialEchoControl (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 0 (FALSE) 1 (TRUE) Default 1 Description Enables or disables echo control on the IPMI serial interface. cfgIpmiSerialDeleteControl (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 0...
Page 384
384DRAC 5 Property Database Group and Object Definitions Legal Values 0 (None) 1 (CR-LF) 2 (NULL) 3 () 4 () 5 () Default 1 Description Specifies the newline sequence specification for the IPMI serial interface. cfgIpmiSerialInputNewLineSequence (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 0 () 1 (NULL) Default 1 Description Specifies the input newline sequence specification for the IPMI serial interface. cfgIpmiSol This group is used to configure...
Page 385
DRAC 5 Property Database Group and Object Definitions385 cfgIpmiSolEnable (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 0 (FALSE) 1 (TRUE) Default 1 Description Enables or disables Serial Over LAN (SOL). cfgIpmiSolBaudRate (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 9600, 19200, 57600, 115200 Default 57600 Description The baud rate for serial communication over LAN. cfgIpmiSolMinPrivilege...
Page 386
386DRAC 5 Property Database Group and Object Definitions Default 4 Description Specifies the minimum privilege level required for serial over LAN access. cfgIpmiSolAccumulateInterval (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 1 – 255. Default 10 Description Specifies the typical amount of time that the BMC waits before transmitting a partial SOL character data packet. This value is 1-based 5ms increments. cfgIpmiSolSendThreshold (Read/Write)...
Page 387
DRAC 5 Property Database Group and Object Definitions387 cfgIpmiLanEnable (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 0 (FALSE) 1 (TRUE) Default 1 Description Enables or disables the IPMI-Over-LAN interface. cfgIpmiLanPrivLimit (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 2 (User) 3 (Operator) 4 (Administrator) Default 0 Description Specifies the maximum privilege level allowed for IPMI over...
Page 388
388DRAC 5 Property Database Group and Object Definitions Default 1 Description Enables or disables global e-mail alerting. This property overrides all individual e-mail alerting enable/disable properties. cfgIpmiEncryptionKey (Read/Write) NOTE: To view or modify this property, you must have Configure DRAC 5 permission and administrator privileges. Legal Values A string of hexadecimal digits from 0 to 20 characters with no spaces. Default 00000000000000000000 Description The IPMI encryption key....
Page 389
DRAC 5 Property Database Group and Object Definitions389 cfgIpmiPef This group is used to configure the platform event filters available on the managed server. The event filters can be used to control policy related to actions that are triggered when critical events occur on the managed system. cfgIpmiPefName (Read Only) Legal Values String. Maximum Length = 255. Default The name of the index filter. Description Specifies the name of the platform event filter. cfgIpmiPefIndex (Read Only) Legal Values 1...
Page 390
390DRAC 5 Property Database Group and Object Definitions cfgIpmiPefAction (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 0 (None) 1 (Power Down) 2 (Reset) 3 (Power Cycle) Default 0 Description Specifies the action that is performed on the managed system when the alert is triggered. cfgIpmiPefEnable (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 0 (FALSE) 1 (TRUE) Default 1 Description Enables or...