Dell C Bg17 Dual Manual

 
15 
6.7. Console Lock  If the security mode has been enabled (by pressing   in the OSD mode), you can 
lock the console by pressing   twice, then  and   . The KVM 
switch will be locked until a user logs in successfully. 
   +  +  +   
 
To unlock the console, follow the onscreen messages to press any key, and type the 
User Name and Password. After the successf ul login, the KVM switch and console 
devices are unlocked and you can resume normal operation.   
  Tip: You can also lock the console in the...

  16 
computer. 
A highlight bar in pink shows which channel is being selected. 
A plus mark (+) to the left of the channel na me means the channel port is 
connected to a second- or  third-tier KVM switch. 
  7.1.3.  Computer & KVM Switch Status   Buzzer status of the KVM switch 
  :  Buzzer is turned on. 
    :  Buzzer is tuned off. 
   Logged-in user name 
The system provides one administrator and 3 user names for security 
management. The current login name (if av ailable) is displayed next to...

 
17 
 
connected to the channel 2 of the first tier. 
 
7.1.5.  Parent Channel Number 
The number below the tier number is t he channel number of the upper tier, 
where the tiered KVM switch is connect ed. For example, 8 means channel 8 of 
the upper-tier KVM switch. 
This number is available for the 2nd-  and 3rd-tier channels, but unavailable for 
the1st tier. 
 
7.1.6.  Page Down / Up Indicator 
This indicator is available for the16-port KVM switch only. The 16-port KVM 
switch displays 16 channels...

  18 
  
┬               ────┬────── 
│                      └   Channel name 
└────────────    Channel number   
Figure 17: Channel banner (single tier) 
 
7.2.2.  Select a Second- or Third-Tier Channel 
A plus mark ( +) to the left of the channel name  indicates a tiered KVM switch is 
connected to this channel port. Pressing   lets you enter the next tier, 
and the screen displays a list of channels  of the selected Slave KVM switch. 
 
 
┬      ┬    ┬    ────┬──────  
│      │    │            └...

 
19 
 
Figure 19:  OSD Setup menu 
 
7.3.1. Scan Mode    Select : 
With this option selected, only  the channels that are marked with S  in the STA 
column in the OSD main menu will be scanned after entering the Auto-Scan 
mode. 
   PC ON : 
This option will scan all channels w here computers are connected and 
powered on. 
  7.3.2. Scan Time 
The default scan time interval is 5 seconds. The value is an integer multiple of 5 
between 5 and 255. 
  7.3.3. Banner Time 
By default, a channel banner is...

  20 
 
Figure 20: Menu position setup 
 
   Banner : 
Press the arrow keys to move the channel banner until it reaches the desired 
position. Then press   to save the new position. 
 
 
Figure 21: Channel banner position setup 
  7.3.5. Hot Key 
The default hot key is  . You can change the hot key and set it to 
  or   if necessary. 
Tip: To change the leading hot key, y ou must use the hot key combination:   
+  +  +  , when NOT in the OSD mode. See 
the section “6.2 Set the Leading Hot Key.”...

 
21 
7.4.  Auto-Scan Using the OSD 
  7.4.1.  Enable the Auto-Scan Function 
To activate the Auto-Scan function in the OSD mode, press  . The 
Auto-Scan banner is displayed to i ndicate the currently-scanned channel. 
 
─┬──   ┬             ──┬──────  
│   
     │                └─  Channel name 
│     └──────────   Channel number 
└───────────────   Current mode 
Figure 22: Auto-Scan banner 
 
Tip: You can also activate the Auto-Scan function by using the hot key combination: 
 +  +  +  , when NOT in...

  22 
 
7.4.3. Different Auto-Scan Modes There are two types of Auto-Scan modes: 
  Scan all computers  that are powered on. 
   Scan only those computers whic h have been marked to be scanned. 
See the section “7.3.1 Scan Mode”  to set the Auto-Scan mode. 
 
7.4.4.  Auto-Scan Time Interval 
The Auto-Scan time interval  can be adjusted by pressing   in the OSD main 
menu. See the section “7.3.2 Scan Time.” 
 
7.5.  Console Lock Using the OSD 
If the security mode has been enabled (see the se ction “7.7...

 
23 
 
7.6.  Rename a Channel  Select the channel that you want to renam e by pressing the Up/Down arrow keys and 
then    in the OSD main menu. The Renam e dialog appears for you to change the 
channel name. Press   to save the new channel name or   to cancel. 
 
Figure 25: Rename dialog 
 
7.7. Security Setup 
 
7.7.1.  Security Mode Login 
Press  in the OSD main menu to enter the security setup mode. The 
administrator login is required  for entering the security mode. 
 
User Name: admin...

  24 
 
Figure 27: Security setup menu 
 7.7.2. Security Mode 
To change the security mode settings,  move the highlight bar to the Security 
Mode  field, and press the   or  key to change the 
option. 
The following functions cannot be performed without enabling the securit\
y mode: 
   Console Lock:  
   Port Lock:   
   User authorization settings  
 
7.7.3.  Change the Administrator Password 
To change the administrator password,  move the highlight bar to the 
Admin/Password field, and press the...