Dell C Bg17 Dual Manual

  
 
 
 
 
 
 
 
 
User’s Manual 
 
 
 
 
 
 
 
 
Version 1.0 
October 2010 
EZswitch-0A-v1.0-E 
  

   
  
 
Disclaimer 
Information in this document is subject to change without no tice. The manufacturer does not make any representations 
or warranties (implied or otherwise) regarding the accuracy  and completeness of this document and shall in no event be 
liable for any loss of profit or any other commercial damage,  including but not limited to special, incidental, consequential, 
or other damages. 
   
No part of this document may be reproduced or transmitt ed in any form by any means, electronic...

 i 
 
Contents 
1. INTRODUCTION........................................................................\
................................................................1 
2. SPECIFICATION........................................................................\
................................................................2 
3. SYSTEM REQUIREMENTS ........................................................................\
.............................................3 
4....

  ii 
  
  7.1.4.
 Currently Selected Channel Number
........................................................................\
......16 
7.1.5. Parent Channel Number........................................................................\
............................17 
7.1.6. Page Down / Up Indicator ........................................................................\
..........................17 
7.1.7. Function Keys Menu........................................................................\...

 
iii 
 
11 .
 TIERING WITH DOMINION KX II
........................................................................\
..................................35 
11.1. CONNECT EZSWITCH TO DOMINION KX II........................................................................\
................35 
11.2. CONFIGURE DOMINION KX II ........................................................................\
....................................35 
11.3. REMOTE ACCESS TO AN EZSWITCH...

  iv 
  
  

 1 
 
1. Introduction 
Thank you for purchasing EZswitch, an 8-port or 16-port keyboard/video/mouse 
(KVM) switch. The product enables you to cont rol 8 or 16 computers or servers from 
one console with PS/2 or USB input devices and a regular monitor. 
 
   Features 
   Supports the PS/2 and  USB keyboard and mouse 
  Computer connection via  PS/2 or USB interface 
   Fully compliant with the U SB 1.1/ 2.0 specification 
   Multi-platform support, including Window s, Linux, Mac OS9/OSX, and Sun...

  2 
  
 
2. Specification 
Specification  
Maximum number of computers 8 or 16 
Channel selection Push buttons, hot key or OSD interface 
LEDs Red ones for indicating  the computer selection 
Green ones for indicating the computer accessibility 
Video 8 or 16 HDB-15 female connectors Channel ports: 
(KB/MS) (PS/2 & USB signals combined) 
PS/2 keyboard One 6-pin mini-DIN female connector 
PS/2 mouse One 6-pin mini-DIN female connector 
Video One HDB-15 female connector 
USB keyboard One USB A type female...

 
3 
3. System Requirements 
 
   Console Requirements: 
  A VGA, SVGA or Multisync moni tor with high resolution capability 
   PS/2 or USB keyboard and mouse 
 
   Computer (Server) Requirements: 
  Equipped with a VGA, SVGA  or Multisync video card 
   Equipped with USB A type por ts or PS/2 6-pin mini-DIN connectors for keyboard 
and mouse 
 
   Cable Requirements: 
  Custom KVM cables 
Note: To purchase these cables, co ntact your dealer or Raritan. 
 
4. Installation 
 
4.1. Front View...

  4 
   Reset Switch: 
Press the Reset switch when you want to  reset the system. This switch must be 
pressed with a pointed object, such as  a paper clip or a ball-point pen. 
 
4.2. Rear View 
 
 
Figure 3: Rear view of the 8-port switch 
 
 
Figure 4: Rear view of the 16-port switch 
 
4.3.  Install a KVM Switch (Single-Tier Installation)   
4.3.1. Installation Guidelines   All computers and devices must be  turned OFF prior to installation. 
   Disconnect power cords from the co mputers...