Dell Appassure 5 User Guide

Dell AppAssure User Guide
Version 5.4.3 Revision B459
TransferMissingRecordsOld
Sends a stream of raw records to the slave core, the list of which is determined by NegotiateMissingRecords.
URI: replicationcomms/slave/sessions/{sessionId}/records/rawdata
HTTP Method: POST
TransferUndiscoveredRecords
Sends a stream of record data for the image being checked, and receives back a stream of record metadata 
which are detected as missing from the remote core.
URI:...

Dell AppAssure User Guide
Version 5.4.3 Revision B460
VerifyReplicationAbility
Verifies replication ability.
URI: replicationcomms/slave/agents/{agentId}/replication/verifyStart
HTTP Method: GET
VerifyReplicationCorePairingAbility
Verifies pairing ability.
URI: replicationcomms/slave/replication/verifyStart/?useCredentials={useCredentials}
HTTP Method: POST
IReplicationManagement
This section describes the service operations available for IReplicationManagement at replication/. 
The...

Dell AppAssure User Guide
Version 5.4.3 Revision B461 •GetRemoteSlaveCoreReplicationPolicy
•GetRemoteSlaveRecoveryPoint
•GetReplicatedAgentsRecoveryPointsInfo
•GetReplicationConfiguration
•IgnorePairingRequest
•RequestForceReplication
•RequestPairing
•RespondToAddAgentsByRequest
•RespondToPairingRequest
•SelectRangeRemoteAgentsRecoveryPoints
•SetAgentReplicationPauseConfiguration
•SetAgentReplicationPauseConfigurationForMasterCores
•SetAgentReplicationPauseConfigurationForSlaveCores...

Dell AppAssure User Guide
Version 5.4.3 Revision B462
DeleteAgentFromSlave
Delete agent from replication relationship from masters side only. Actual replicated and protected agent on 
master and slave cores stay available.
URI: replication/slaves/{coreId}/replicatedagents/{agentId}
HTTP Method: DELETE
DeleteMasterCore
Delete remote master core from replication.
URI: replication/masters/{coreId}?deleteRecoveryPoints={deleteRecoveryPoints}
HTTP Method: DELETE
DeletePairing
Delete pairing between master and...

Dell AppAssure User Guide
Version 5.4.3 Revision B463
GetCoreIdByDescriptor
Tests a core descriptor to validate the ability to connect to it. Returns CoreId. Using NTLM authentication.
URI: replication/cores/descriptor
HTTP Method: PUT
GetCoreIdByUrl
Tests connection to a remote core. Returns CoreId. Using Anonymous authentication.
URI: replication/cores/{hostUri}
HTTP Method: PUT
GetCountRemoteAgentsRecoveryPoints
Gets count of replicated recovery points on a remote slave core for the specific agent....

Dell AppAssure User Guide
Version 5.4.3 Revision B464
GetRemoteCores
Gets a list of all of the remote cores this core knows about, both master and slave
URI: replication/cores/?forceRefresh={forceRefresh}
HTTP Method: GET
GetRemoteMasterCoresForDemand
Getting remote masers cores info for current slave core.
URI: replication/cores/slave/masters
HTTP Method: PUT
GetRemoteSlaveCoreReplicationPolicy
Gets remote slave core replication policy. This work with a master core side only.
URI:...

Dell AppAssure User Guide
Version 5.4.3 Revision B465
RequestPairing
Instructs this core to send a replication request to a remote core. Replication will start once the remote core 
approves the request. Returns slave core ID.
URI: replication/cores/pairing/request
HTTP Method: POST
RespondToAddAgentsByRequest
Responds to a pending agents from replication requests.
URI: replication/requests/pairing/{requestId}/agents
POST
RespondToPairingRequest
Responds to a pending replication requests.
URI:...

Dell AppAssure User Guide
Version 5.4.3 Revision B466
SetRemoteSlaveCoreReplicationPolicy
Sets remote slave core replication policy. This work with a master core side only.
URI: replication/cores/slaves/{slaveCoreId}/settings/policy
HTTP Method: PUT
SetReplicationConfiguration
Sets replication configuration.
URI: replication/config
HTTP Method: PUT
SwitchFailoverAgentToReplicated
Converts replicated agent to failover.
URI: replication/cores/{coreId}/agents/{agentId}/failover
HTTP Method: POST...

Dell AppAssure User Guide
Version 5.4.3 Revision B467
VerifyAddAgentsByRequestForExistingCore
Verifies whether agents can be safely replicated by request.
URI: replication/cores/slave/{coreId}/agents/request/verify
HTTP Method: POST
VerifyCorePairingAbilityByDemand
Tests a core descriptor to validate the ability to create pairing to remote core. Returns CoreId. Using NTLM 
authentication.
URI: replication/cores/verify/demand
HTTP Method: PUT
VerifyCorePairingAbilityByRequest
Tests a core descriptor to...

Dell AppAssure User Guide
Version 5.4.3 Revision B468
GetAgentReport
Gets a report for a particular agent
URI: report/agentReport
HTTP Method: PUT
GetCoreFailureReport
Gets a failure report for a particular set of cores
URI: report/coreFailureReport
HTTP Method: PUT
GetCoreReport
Gets a report for a particular set of cores.
URI: report/coreReport
HTTP Method: PUT
GetDatabaseCoreIdentities
Gets identity (id-name pairs) of Cores having reporting data in database currently used by the Core.
URI:...