Dell Alienware M17x Service Guide
Here you can view all the pages of manual Dell Alienware M17x Service Guide. The Dell manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 51
051051/ CHAPTER 12: MAGNESIUM COVER Replacing the Magnesium Cover Replace the magnesium cover on the computer base.1. Replace the ten screws that secure the magnesium cover to the computer 2. base. Replace the left and right brackets (see “Replacing the Brackets” on page 3. 47). Route the Mini-Card antenna cables into the routing guides and connect 4. them to the respective connectors. Connect the display cable and the camera cable to the respective system 5. board connectors. Replace the palm rest...
Page 53
053053/ CHAPTER 13: DISPLAY Display Assembly Removing the Display Assembly Follow the instructions in “Before You Begin” on page 1. 6. Remove the battery pack (see “Removing the Battery Pack” on page 2. 11). Remove the center control cover (see “Removing the Center Control Cover” 3. on page 33). Remove the keyboard (see “Removing the Keyboard” on page 4. 38). Remove the palm rest (see “Removing the Palm Rest” on page 5. 42). Remove the left and right brackets (see “Removing the Brackets” on 6. page...
Page 54
054054/ CHAPTER 13: DISPLAY Bend the display assembly towards the computer base at a 45-degree angle 9. and lift the display assembly off the computer. 1 1display assembly Remove the four screws (two from each hinge) that secure the display 8. assembly to the computer base. 1 2 1screws (4)2display assembly
Page 55
055055/ CHAPTER 13: DISPLAY Replacing the Display Assembly Align the screw holes on the display hinges with the computer base.1. Replace the four screws (two on each hinge) that secure the display 2. assembly to the computer base. Replace the magnesium cover (see “Replacing the Magnesium Cover” on 3. page 51). Replace the left and right brackets (see “Replacing the Brackets” on page 4. 47). Replace the palm rest (see “Replacing the Palm Rest” on page 5. 44). Replace the keyboard (see “Replacing the...
Page 56
056056/ CHAPTER 13: DISPLAY 1 2 1screws (2)2display assembly Display Back Cover Removing the Display Back Cover Follow the instructions in “Before You Begin” on page 1. 6. Remove the battery pack (see “Removing the Battery Pack” on page 2. 11). Remove the center control cover (see “Removing the Center Control Cover” 3. on page 33). Remove the keyboard (see “Removing the Keyboard” on page 4. 38). Remove the palm rest (see “Removing the Palm Rest” on page 5. 42). Remove the left and right brackets (see...
Page 57
057057/ CHAPTER 13: DISPLAY Slide the display back cover door out and lift it off the display assembly.10. 1 1display back cover door Remove the two screws that secure the display back cover to the display 11. assembly. Disconnect the AlienHead cable from the connector.12. Slide the display back cover up and lift it off the display assembly.13. 1 3 2 1display back cover3AlienHead cable connector 2screws (2)
Page 58
058058/ CHAPTER 13: DISPLAY Replacing the Display Back Cover Align the display back cover with the back of the display assembly and slide 1. it into position. Connect the AlienHead cable to the connector.2. Replace the two screws that secure the display back cover with the display 3. assembly. Slide the display back cover door in place.4. Turn the display assembly over and replace the two screws that secure the 5. display back cover door to the display assembly. Replace the display assembly (see...
Page 59
059059/ CHAPTER 13: DISPLAY Lift the top of the AlienHead board and slide the bottom portion down to 12. detach it from the tab that holds it in place. Lift the AlienHead board off the display back cover.13. 1 2 3 1AlienHead board3display back cover 2screw AlienHead Board Removing the AlienHead Board Follow the instructions in “Before You Begin” on page 1. 6. Remove the battery pack (see “Removing the Battery Pack” on page 2. 11). Remove the center control cover (see “Removing the Center Control Cover”...
Page 60
060060/ CHAPTER 13: DISPLAY Replacing the AlienHead Board Align the AlienHead board with the tab on the display back cover and slide it 1. into position. Replace the screw that secures the AlienHead board to the display back 2. cover. Replace the display back cover (see “Replacing the Display Back Cover” on 3. page 58). Replace the display assembly (see “Replacing the Display Assembly” on 4. page 55). Replace the magnesium cover (see “Replacing the Magnesium Cover” on 5. page 51). Replace the left and...