Home > Dell > Projector > Dell 5100MP Projector Owners Manual

Dell 5100MP Projector Owners Manual

Here you can view all the pages of manual Dell 5100MP Projector Owners Manual. The Dell manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 51

Specifications51
5
Specifications
5
Light Valve Single-chip 0.95 SXGA+ DLP™ 
LVDS (low-voltage differential 
signaling) technology
Brightness 3300 ANSI Lumens (Max.)
Contrast Ratio 2500:1 Typical (Full On/Full Off) 
Uniformity 80% Typical (Japan Standard - JBMA)
Lamp 300-watt user-replaceable 1700-hour 
lamp (up to 2200 hours in eco mode)
Number of Pixels 1400 x 1050 (SXGA+)
Displayable Color 16.7M colors
Color Wheel Speed 100~127.5Hz (2X)
Projection Lens F/2.6~2.87, f=39.1~46.92 mm with 
1.2x manual...

Page 52

www.dell.com | support.dell.com
52Specifications
Power Consumption 400 watts typical, 335 watts in eco 
mode
Audio  2 speakers, 2 watts RMS
Noise Level 37dB(A) Full-on mode, 31dB(A) Eco-
mode
Weight 8.2 lbs (3.73 kgs)
Dimensions (W x H x D) External 13 x 10.3 x 4.5 ± 0.04 inches 
(329.8 x 261.4 x 115.2 ± 1 mm)
Environmental Operating temperature:  5
oC - 35oC 
(41oF- 95oF)
Humidity:  80% maximum
Storage temperature: -20
oC to 60oC
(-4oF to 140oF)
Humidity:  80% maximum
Regulatory FCC, CE, VCCI, UL, cUL,...

Page 53

Specifications53
RS232 Pin Assignment
RS232 Protocol 
• Communication Settings 
• Command types
To pop up the OSD menu and adjust the settings.
• Control command Syntax (From PC to Projector)
[H][AC][SoP][CRC][ID][SoM][COMMAND] 
•Example: Power ON Command (Send low byte firstly)
--> 0xBE, 0xEF, 0x10, 0x05, 0x00, 0xC6, 0xFF, 0x11, 0x11, 0x01, 0x00, 0x01
Header BE EF
Video input: 3 RCA connectors for 
component video/ HDTV input, one 
mini-DIN 4-pin S-video input, one 
RCA jack for composite video input...

Page 54

www.dell.com | support.dell.com
54Specifications
Address Code 10 ==> pt_OEM
Payload  Size 05 00==> From wMsgID to end
CRC C6 FF ==> If CRC value is C6 (Low Byte) FF (High Byte)
MsgID 11 11
MsgSize 01 00==> From command to end.
Command  01==> Power ON command.
• Projector Response Message Table:
0x00: Success
0x01: Invalid command (on the control command list but not valid. e.g. card reader 
command while no card reader plug-in)
0x02: Error command (includes CRC error and unknown commands). 
0x03: System...

Page 55

Specifications55
Control Commands List 
Header
(WORD)Address
Code 
(BYTE)Size of the 
payload
(WORD)CRC16 
for the 
entire 
packet
(WORD)MsG ID
(WORD)MsG size 
(WORD)Command 
code 
(BYTE)Command 
Description
0xefbe 0x10 0x0005 0xffc6
0xbfc7
0x7e07
0x3fc5
0xfe05
0xbe04
0x7fc4
0x3fc0
0xfe00
0xbe01
0x7fc1
0x3e03
0xffc3
0xbfc2
0x7e02
0x3fca
0xfe0a
0xbe0b
0x7fcb
0x3e09
0xffc9
0xbfc8
0x7e08
0x3e0c
0xffcc
0xbfcd
0x7e0d
0x3fcf
0xfe0f
0xbe0e
0x7fce
0x3fde
0xfe1e
0xbe1f
0x7fdf
0xbfd9
0x7e19
0x3fdb
0xfe1b
0xbe1a...

Page 56

www.dell.com | support.dell.com
56Specifications
PIP combination sources
 NOTE: If two sources combination overpass the bandwidth of the scaler, the 
projector will show the black image. 
MIB File
Dell-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Integer32,
    NOTIFICATION-TYPE, enterprises, Counter32,
    OpaqueFROM SNMPv2-SMI
    TEXTUAL-CONVENTION, DisplayString, TruthValue
    FROM SNMPv2-TC;
-- textual conventions
DisplayString ::=
    OCTET STRING
-- This data type is used...

Page 57

Specifications57
DellMIB5100MP OBJECT IDENTIFIER ::= { DellMIB 1 }
pjtState OBJECT-TYPE
    SYNTAXINTEGER (SIZE(0..127))
    MAX-ACCESSread-only
    STATUScurrent
    DESCRIPTION
    
A value which indicates the set of the projector.
0: Off;1: Cooling;2: On                                            
    
    ::= { DellMIB5100MP 1 }
pjtLampHour OBJECT-TYPE
    SYNTAXINTEGER (SIZE(0..127))
    MAX-ACCESSread-only
    STATUScurrent
    DESCRIPTION
    
A value which indicates the lamp hours of the...

Page 58

www.dell.com | support.dell.com
58Specifications
    SYNTAXINTEGER (SIZE(0..127))
    MAX-ACCESSread-write
    STATUScurrent
    DESCRIPTION
    
A value which indicates to power on/off the projector
depending on the pjtState.                           
If the pjtState is On then it will be changed to Cooling.                                             
If the pjtState is Standby then it will be changedto On....

Page 59

Specifications59
    DESCRIPTION
    
    A command which indicates to zoom out image.
                                                      
    ::= { DellMIB5100MP 9 }                            
                                                       
pjtMuteButton OBJECT-TYPE
    SYNTAXINTEGER (SIZE(0..1))
    MAX-ACCESSread-write
    STATUScurrent
    DESCRIPTION
    
A command which indicates to mute/enable audio output.
                                                      
    ::= { DellMIB5100MP...

Page 60

www.dell.com | support.dell.com
60Specifications
                                                                                                              
pjtHKeystoneUp OBJECT-TYPE
    SYNTAXINTEGER (SIZE(0..127))
    MAX-ACCESSread-write
    STATUScurrent
    DESCRIPTION
    
A command which indicates to increase horizontal keystone.
                                                      
    ::= { DellMIB5100MP 14 }                            
pjtHKeystoneDown OBJECT-TYPE
    SYNTAXINTEGER...
Start reading Dell 5100MP Projector Owners Manual

Related Manuals for Dell 5100MP Projector Owners Manual

All Dell manuals